Difference: VisSeminars (1 vs. 221)

Revision 22114 Nov 2019 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 30 to 30
 
  • 11 February 2020 - Jay Warnett - EPSRC Strategic Equipment – High Speed, High Throughput X-ray CT
  • 14 January 2020
  • 18 December 2019 - Special Working Group event proposed slot: Ozan Öktem
Changed:
<
<
>
>
  • 10 December 2019 - Sarah Fisher -x-ray back-scatter imaging - Tristan Lowe Metrology and dimensional XCT - and CIL software Release status https://www.ccpi.ac.uk/CIL
 
  • 12 November 2019 - Anton du Plessis (Stellenbosch CT Facility, South Africa) remote access and Lindsey Marshall, Scientific Liaison (Europe) lindsey@syglass.io www.syglass.io (att 22+1)
  • 9 July 2019 - Mike White / Bill Lionheart presentation on the Helgason-Ludwig consistency conditions, and Drishti-interface project, Mario Sandoval Olive (att 13)
  • 2 July 2019 - Extra special research session: (att 19)

Revision 22012 Nov 2019 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 29 to 29
 
  • 10 March 2020
  • 11 February 2020 - Jay Warnett - EPSRC Strategic Equipment – High Speed, High Throughput X-ray CT
  • 14 January 2020
Changed:
<
<
  • 18 December 2019 - Special Working Group event proposed slot: Ozan Öktem
>
>
  • 18 December 2019 - Special Working Group event proposed slot: Ozan Öktem
 
Changed:
<
<
  • 12 November 2019 - Anton du Plessis (Stellenbosch CT Facility, South Africa) remote access and Lindsey Marshall (Scientific Liaison (Europe) lindsey@syglass.io www.syglass.io)
>
>
  • 12 November 2019 - Anton du Plessis (Stellenbosch CT Facility, South Africa) remote access and Lindsey Marshall, Scientific Liaison (Europe) lindsey@syglass.io www.syglass.io (att 22+1)
 
  • 9 July 2019 - Mike White / Bill Lionheart presentation on the Helgason-Ludwig consistency conditions, and Drishti-interface project, Mario Sandoval Olive (att 13)
  • 2 July 2019 - Extra special research session: (att 19)
    • Ying Wang In-situ Studies of Damage Mechanisms in Composites

Revision 21906 Nov 2019 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 27 to 27
 
  • 12 May 2020
  • 14 April 2020
  • 10 March 2020
Changed:
<
<
  • 11 February 2020 - Jay Warnett - EPSRC Strategic Equipment – High Speed, High Throughput X-ray CT
>
>
  • 11 February 2020 - Jay Warnett - EPSRC Strategic Equipment – High Speed, High Throughput X-ray CT
 
  • 14 January 2020
Changed:
<
<
  • 18 December 2019 - Special Working Group event proposed slot
  • 10 December 2019 - Sarah Fisher -x-ray back-scatter imaging - and CIL software Release status https://www.ccpi.ac.uk/CIL
  • 12 November 2019 - Anton du Plessis (Stellenbosch CT Facility, South Africa) remote access and Lindsey Marshall (Scientific Liaison (Europe) lindsey@syglass.io www.syglass.io)
>
>
  • 18 December 2019 - Special Working Group event proposed slot: Ozan Öktem
  • 10 December 2019 - Sarah Fisher -x-ray back-scatter imaging - and CIL software Release status https://www.ccpi.ac.uk/CIL
  • 12 November 2019 - Anton du Plessis (Stellenbosch CT Facility, South Africa) remote access and Lindsey Marshall (Scientific Liaison (Europe) lindsey@syglass.io www.syglass.io)
 
  • 9 July 2019 - Mike White / Bill Lionheart presentation on the Helgason-Ludwig consistency conditions, and Drishti-interface project, Mario Sandoval Olive (att 13)
  • 2 July 2019 - Extra special research session: (att 19)
    • Ying Wang In-situ Studies of Damage Mechanisms in Composites

Revision 21825 Oct 2019 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 29 to 29
 
  • 10 March 2020
  • 11 February 2020 - Jay Warnett - EPSRC Strategic Equipment – High Speed, High Throughput X-ray CT
  • 14 January 2020
Added:
>
>
  • 18 December 2019 - Special Working Group event proposed slot
 
  • 10 December 2019 - Sarah Fisher -x-ray back-scatter imaging - and CIL software Release status https://www.ccpi.ac.uk/CIL
  • 12 November 2019 - Anton du Plessis (Stellenbosch CT Facility, South Africa) remote access and Lindsey Marshall (Scientific Liaison (Europe) lindsey@syglass.io www.syglass.io)
  • 9 July 2019 - Mike White / Bill Lionheart presentation on the Helgason-Ludwig consistency conditions, and Drishti-interface project, Mario Sandoval Olive (att 13)
Line: 76 to 77
 Proposals:

  • new CCPi Flagship results
Added:
>
>
  • Ahmed Sharif, beamline scientist of K11 (DLS DIAD beamline)
  • Brum Nick Green turbines
 
Changed:
<
<
  • Ozan Öktem ""...
>
>
  • Ozan Öktem
  • Shaz Khan
 
Extra Specialist Seminars:

Monday 10 June 2019 - Joe Kelleher EnginX - part of the CCPi Working Group meeting: video conference event ‘Neutron diffraction and imaging on Engin-X for multi-scale characterisation’. Abstract: Characterisation and analysis of engineering structures from the atomic up to the macroscale is often needed for a full understanding of their behaviour. Neutrons are a versatile probe for such characterisation, as the wavelengths of neutrons needed for diffraction from common crystalline materials can easily achieve penetrations of several centimetres in common engineering materials. Here, we show examples of engineering research on the Engin-X instrument at the ISIS Pulsed Neutron Source, while also demonstrating how these may be combined with complementary measurements on other instruments.*8 March 2018* Manchester Inverse Imaging Goup Seminar: Alan Turing Building, Frank Adams 2 at 2pm Prof Bill Lionheart "Histotomography"

Revision 21704 Oct 2019 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 30 to 30
 
  • 11 February 2020 - Jay Warnett - EPSRC Strategic Equipment – High Speed, High Throughput X-ray CT
  • 14 January 2020
  • 10 December 2019 - Sarah Fisher -x-ray back-scatter imaging - and CIL software Release status https://www.ccpi.ac.uk/CIL
Changed:
<
<
  • 12 November 2019 - Anton du Plessis (Stellenbosch CT Facility, South Africa) remote access (provisional) and Ozan Öktem ""
>
>
  • 12 November 2019 - Anton du Plessis (Stellenbosch CT Facility, South Africa) remote access and Lindsey Marshall (Scientific Liaison (Europe) lindsey@syglass.io www.syglass.io)
 
  • 9 July 2019 - Mike White / Bill Lionheart presentation on the Helgason-Ludwig consistency conditions, and Drishti-interface project, Mario Sandoval Olive (att 13)
  • 2 July 2019 - Extra special research session: (att 19)
    • Ying Wang In-situ Studies of Damage Mechanisms in Composites
Line: 77 to 77
 
Changed:
<
<
  • ...
>
>
  • Ozan Öktem ""...
 
Extra Specialist Seminars:

Monday 10 June 2019 - Joe Kelleher EnginX - part of the CCPi Working Group meeting: video conference event ‘Neutron diffraction and imaging on Engin-X for multi-scale characterisation’. Abstract: Characterisation and analysis of engineering structures from the atomic up to the macroscale is often needed for a full understanding of their behaviour. Neutrons are a versatile probe for such characterisation, as the wavelengths of neutrons needed for diffraction from common crystalline materials can easily achieve penetrations of several centimetres in common engineering materials. Here, we show examples of engineering research on the Engin-X instrument at the ISIS Pulsed Neutron Source, while also demonstrating how these may be combined with complementary measurements on other instruments.*8 March 2018* Manchester Inverse Imaging Goup Seminar: Alan Turing Building, Frank Adams 2 at 2pm Prof Bill Lionheart "Histotomography"

Revision 21627 Sep 2019 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 29 to 29
 
  • 10 March 2020
  • 11 February 2020 - Jay Warnett - EPSRC Strategic Equipment – High Speed, High Throughput X-ray CT
  • 14 January 2020
Changed:
<
<
>
>
 
  • 12 November 2019 - Anton du Plessis (Stellenbosch CT Facility, South Africa) remote access (provisional) and Ozan Öktem ""
  • 9 July 2019 - Mike White / Bill Lionheart presentation on the Helgason-Ludwig consistency conditions, and Drishti-interface project, Mario Sandoval Olive (att 13)
  • 2 July 2019 - Extra special research session: (att 19)

Revision 21518 Sep 2019 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 30 to 30
 
  • 11 February 2020 - Jay Warnett - EPSRC Strategic Equipment – High Speed, High Throughput X-ray CT
  • 14 January 2020
  • 10 December 2019 - CIL software Release status https://www.ccpi.ac.uk/CIL
Changed:
<
<
  • 12 November 2019 - Anton du Plessis (Stellenbosch CT Facility, South Africa) remote access (provisional);
  • 8 October 2019 - Ozan Öktem ""
>
>
  • 12 November 2019 - Anton du Plessis (Stellenbosch CT Facility, South Africa) remote access (provisional) and Ozan Öktem ""
 
  • 9 July 2019 - Mike White / Bill Lionheart presentation on the Helgason-Ludwig consistency conditions, and Drishti-interface project, Mario Sandoval Olive (att 13)
  • 2 July 2019 - Extra special research session: (att 19)
    • Ying Wang In-situ Studies of Damage Mechanisms in Composites
Line: 39 to 38
 
    • Shelley Rawson Time-lapse 3D Imaging During The Compression Of Freeze Cast Aerogel By Phase Contrast Synchrotron X-ray Micro-CT
    • Chakri Gudla Initiation and short crack growth behaviour of environmentally induced cracks in AA5083 H131 investigated across time and length scales
    • Sam Johnston Diffraction Constrast Tomography
Changed:
<
<
    • Sam McDonald Non-destructive mapping of crystallographic microstructure evolution in 3D by laboratory X-ray diffraction contrast tomography
>
>
    • Sam ! McDonald Non-destructive mapping of crystallographic microstructure evolution in 3D by laboratory X-ray diffraction contrast tomography
 
    • Ryan Warr Developing Techniques in Colour X-ray CT Imaging
    • Evangelos Papoutsellis Multi-Channel tomographic reconstruction and analysis of the CCPi Core Imaging Library
    • James O'Sullivan What microCT can tell us about neglected tropical diseases

Revision 21410 Sep 2019 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 10 to 10
  Recent and next Seminars:
Changed:
<
<
Abstracts: CIL software availability - October Meeting

There’s a top-level overview here http://www.ccpi.ac.uk/cil

Bit more guidance including installation instructions here https://github.com/vais-ral/CCPi-Framework

(growing) documentation is here http://edosil.net/stfc/cil/html/index.html

and a number of demos to get started are here https://github.com/vais-ral/CIL-Demos

>
>
Abstracts: CIL software availability - December Meeting
 this includes demos with Nikon data sets exemplified by the Sophiabeads data here https://github.com/vais-ral/CIL-Demos/tree/master/Tomography/Real%20Data/Cone%20Beam


Line: 32 to 27
 
  • 12 May 2020
  • 14 April 2020
  • 10 March 2020
Changed:
<
<
  • 11 February 2020 Jay Warnett - EPSRC Strategic Equipment – High Speed, High Throughput X-ray CT
>
>
  • 11 February 2020 - Jay Warnett - EPSRC Strategic Equipment – High Speed, High Throughput X-ray CT
 
  • 14 January 2020
Changed:
<
<
  • 10 December 2019
  • 12 November 2019 - CIL software Release status https://www.ccpi.ac.uk/CIL
  • 8? October 2019 - Anton du Plessis (Stellenbosch CT Facility, South Africa) remote access (provisional); September 2019 - Ozan Öktem (provisional)
>
>
  • 10 December 2019 - CIL software Release status https://www.ccpi.ac.uk/CIL
  • 12 November 2019 - Anton du Plessis (Stellenbosch CT Facility, South Africa) remote access (provisional);
  • 8 October 2019 - Ozan Öktem ""
 
  • 9 July 2019 - Mike White / Bill Lionheart presentation on the Helgason-Ludwig consistency conditions, and Drishti-interface project, Mario Sandoval Olive (att 13)
  • 2 July 2019 - Extra special research session: (att 19)
    • Ying Wang In-situ Studies of Damage Mechanisms in Composites

Revision 21309 Sep 2019 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 32 to 32
 
  • 12 May 2020
  • 14 April 2020
  • 10 March 2020
Changed:
<
<
  • 11 February 2020
>
>
  • 11 February 2020 Jay Warnett - EPSRC Strategic Equipment – High Speed, High Throughput X-ray CT
 
Changed:
<
<
  • 8 October 2019 - Anton du Plessis (Stellenbosch CT Facility, South Africa) remote access (provisional)
  • 10 September 2019 - Ozan Öktem (provisional)
>
>
  • 8? October 2019 - Anton du Plessis (Stellenbosch CT Facility, South Africa) remote access (provisional); September 2019 - Ozan Öktem (provisional)
 
  • 9 July 2019 - Mike White / Bill Lionheart presentation on the Helgason-Ludwig consistency conditions, and Drishti-interface project, Mario Sandoval Olive (att 13)
  • 2 July 2019 - Extra special research session: (att 19)
    • Ying Wang In-situ Studies of Damage Mechanisms in Composites

Revision 21201 Aug 2019 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 35 to 35
 
  • 11 February 2020
  • 14 January 2020
  • 10 December 2019
Changed:
<
<
  • 12 November 2019
  • 8 October 2019 CIL software Release status https://www.ccpi.ac.uk/CIL
  • 10 September 2019, Anton du Plessis (Stellenbosch CT Facility, South Africa) remote access; plus Ozan Öktem (provisional)
>
>
  • 12 November 2019 - CIL software Release status https://www.ccpi.ac.uk/CIL
  • 8 October 2019 - Anton du Plessis (Stellenbosch CT Facility, South Africa) remote access (provisional)
  • 10 September 2019 - Ozan Öktem (provisional)
 
  • 9 July 2019 - Mike White / Bill Lionheart presentation on the Helgason-Ludwig consistency conditions, and Drishti-interface project, Mario Sandoval Olive (att 13)
  • 2 July 2019 - Extra special research session: (att 19)
    • Ying Wang In-situ Studies of Damage Mechanisms in Composites

Revision 21123 Jul 2019 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 10 to 10
  Recent and next Seminars:
Changed:
<
<
Tuesday 9 July 2019 - Mike White / Bill Lionheart and Mario Sandoval Olive
>
>
Abstracts: CIL software availability - October Meeting
 
Changed:
<
<
Abstracts:
>
>
There’s a top-level overview here http://www.ccpi.ac.uk/cil
 
Changed:
<
<
Mike White - Title: Helgason-Ludwig Consistency Conditions Abstract: The Helgason-Ludwig consistency conditions provide a means to test the validity of parallel-beam data, acquired from either an X-ray or neutron source. Simulations of various forms of error have been computed and research is now being done to determine whether a diagnosis of the error can be successfully implemented using the Helgason-Ludwig consistency conditions.
>
>
Bit more guidance including installation instructions here https://github.com/vais-ral/CCPi-Framework
 
Changed:
<
<
Mario Sandoval Olive - Title: Controlling 3D visualisations with multiple controllers Abstract: The talk will highlight the current state of the development of a new multi-layer framework ideal for two-handed interaction in desktop virtual environments, and we report some of our initial results. Another way to control Drishti
>
>
(growing) documentation is here http://edosil.net/stfc/cil/html/index.html

and a number of demos to get started are here https://github.com/vais-ral/CIL-Demos

this includes demos with Nikon data sets exemplified by the Sophiabeads data here https://github.com/vais-ral/CIL-Demos/tree/master/Tomography/Real%20Data/Cone%20Beam

 
Line: 32 to 36
 
  • 14 January 2020
  • 10 December 2019
  • 12 November 2019
Changed:
<
<
  • 8 October 2019
>
>
 
  • 10 September 2019, Anton du Plessis (Stellenbosch CT Facility, South Africa) remote access; plus Ozan Öktem (provisional)
  • 9 July 2019 - Mike White / Bill Lionheart presentation on the Helgason-Ludwig consistency conditions, and Drishti-interface project, Mario Sandoval Olive (att 13)
  • 2 July 2019 - Extra special research session: (att 19)

Revision 21012 Jul 2019 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 23 to 23
 
Lunch-and-Learn Sessions; often 12 noon - second Tuesday of the Month in Manchester (Royce Institute - Alan Turing Building / PSI)

Schedule:

Changed:
<
<
  • 10 December 2019 TBA
  • 12 November 2019 TBA
  • 8 October 2019 TBA
>
>
  • 14 July 2020
  • 9 June 2020
  • 12 May 2020
  • 14 April 2020
  • 10 March 2020
  • 11 February 2020
  • 14 January 2020
  • 10 December 2019
  • 12 November 2019
  • 8 October 2019
 
  • 10 September 2019, Anton du Plessis (Stellenbosch CT Facility, South Africa) remote access; plus Ozan Öktem (provisional)
  • 9 July 2019 - Mike White / Bill Lionheart presentation on the Helgason-Ludwig consistency conditions, and Drishti-interface project, Mario Sandoval Olive (att 13)
  • 2 July 2019 - Extra special research session: (att 19)

Revision 20909 Jul 2019 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 27 to 27
 
  • 12 November 2019 TBA
  • 8 October 2019 TBA
  • 10 September 2019, Anton du Plessis (Stellenbosch CT Facility, South Africa) remote access; plus Ozan Öktem (provisional)
Changed:
<
<
  • 9 July 2019 - Mike White / Bill Lionheart presentation on the Helgason-Ludwig consistency conditions, and Drishti-interface project, Mario Sandoval Olive
>
>
  • 9 July 2019 - Mike White / Bill Lionheart presentation on the Helgason-Ludwig consistency conditions, and Drishti-interface project, Mario Sandoval Olive (att 13)
 
  • 2 July 2019 - Extra special research session: (att 19)
    • Ying Wang In-situ Studies of Damage Mechanisms in Composites
    • Wen Zhang The effect of anisotropic microstructure on the fatigue overload behaviour of ultrafine-grained nickel

Revision 20803 Jul 2019 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 16 to 16
  Mike White - Title: Helgason-Ludwig Consistency Conditions Abstract: The Helgason-Ludwig consistency conditions provide a means to test the validity of parallel-beam data, acquired from either an X-ray or neutron source. Simulations of various forms of error have been computed and research is now being done to determine whether a diagnosis of the error can be successfully implemented using the Helgason-Ludwig consistency conditions.
Changed:
<
<
Mario Sandoval Olive - Title LISU: Library for Interactive Settings of User-Modes Abstract: A new multi-layered framework for multimodal interactions. Another way to control Drishti
>
>
Mario Sandoval Olive - Title: Controlling 3D visualisations with multiple controllers Abstract: The talk will highlight the current state of the development of a new multi-layer framework ideal for two-handed interaction in desktop virtual environments, and we report some of our initial results. Another way to control Drishti
 
Line: 76 to 76
 
  • ...
Extra Specialist Seminars:
Changed:
<
<
Monday 10 June 2019 - Joe Kelleher EnginX - part of the CCPi Working Group meeting: video conference event ‘Neutron diffraction and imaging on Engin-X for multi-scale characterisation’. Abstract: Characterisation and analysis of engineering structures from the atomic up to the macroscale is often needed for a full understanding of their behaviour. Neutrons are a versatile probe for such characterisation, as the wavelengths of neutrons needed for diffraction from common crystalline materials can easily achieve penetrations of several centimetres in common engineering materials. Here, we show examples of engineering research on the Engin-X instrument at the ISIS Pulsed Neutron Source, while also demonstrating how these may be combined with complementary measurements on other instruments.*8 March 2018* Manchester Inverse Imaging Goup Seminar: Alan Turing Building, Frank Adams 2 at 2pm Prof Bill Lionheart "Histotomography"
>
>
Monday 10 June 2019 - Joe Kelleher EnginX - part of the CCPi Working Group meeting: video conference event ‘Neutron diffraction and imaging on Engin-X for multi-scale characterisation’. Abstract: Characterisation and analysis of engineering structures from the atomic up to the macroscale is often needed for a full understanding of their behaviour. Neutrons are a versatile probe for such characterisation, as the wavelengths of neutrons needed for diffraction from common crystalline materials can easily achieve penetrations of several centimetres in common engineering materials. Here, we show examples of engineering research on the Engin-X instrument at the ISIS Pulsed Neutron Source, while also demonstrating how these may be combined with complementary measurements on other instruments.*8 March 2018* Manchester Inverse Imaging Goup Seminar: Alan Turing Building, Frank Adams 2 at 2pm Prof Bill Lionheart "Histotomography"
  12 March 2019 Lunch-and-Learn 12noon in Manchester, RAL and video-conf

Revision 20703 Jul 2019 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 10 to 10
  Recent and next Seminars:
Changed:
<
<
Tuesday 9 July 2019 - Mike White / Bill Lionheart presentation on the Helgason-Ludwig consistency conditions, and Drishti-interface project, Mario Sandoval Olive
>
>
Tuesday 9 July 2019 - Mike White / Bill Lionheart and Mario Sandoval Olive
 
Changed:
<
<
Abstracts here soon.
>
>
Abstracts:
 
Changed:
<
<
Monday 10 June 2019 - Joe Kelleher EnginX - part of the CCPi Working Group meeting: video conference event ‘Neutron diffraction and imaging on Engin-X for multi-scale characterisation’. Abstract: Characterisation and analysis of engineering structures from the atomic up to the macroscale is often needed for a full understanding of their behaviour. Neutrons are a versatile probe for such characterisation, as the wavelengths of neutrons needed for diffraction from common crystalline materials can easily achieve penetrations of several centimetres in common engineering materials. Here, we show examples of engineering research on the Engin-X instrument at the ISIS Pulsed Neutron Source, while also demonstrating how these may be combined with complementary measurements on other instruments.
>
>
Mike White - Title: Helgason-Ludwig Consistency Conditions Abstract: The Helgason-Ludwig consistency conditions provide a means to test the validity of parallel-beam data, acquired from either an X-ray or neutron source. Simulations of various forms of error have been computed and research is now being done to determine whether a diagnosis of the error can be successfully implemented using the Helgason-Ludwig consistency conditions.

Mario Sandoval Olive - Title LISU: Library for Interactive Settings of User-Modes Abstract: A new multi-layered framework for multimodal interactions. Another way to control Drishti

 
Line: 70 to 72
 Proposals:

  • new CCPi Flagship results
Changed:
<
<
  • PhD project pre-results
  • ENGINX J Kelleher
  • Jason Wong (plastic surgeon - major trauma) Imaging needs described
  • Invite Phil Childs - to UoM - stories of measurement standards.
>
>
 
  • ...
Extra Specialist Seminars:
Changed:
<
<
8 March 2018 Manchester Inverse Imaging Goup Seminar: Alan Turing Building, Frank Adams 2 at 2pm Prof Bill Lionheart "Histotomography"
>
>
Monday 10 June 2019 - Joe Kelleher EnginX - part of the CCPi Working Group meeting: video conference event ‘Neutron diffraction and imaging on Engin-X for multi-scale characterisation’. Abstract: Characterisation and analysis of engineering structures from the atomic up to the macroscale is often needed for a full understanding of their behaviour. Neutrons are a versatile probe for such characterisation, as the wavelengths of neutrons needed for diffraction from common crystalline materials can easily achieve penetrations of several centimetres in common engineering materials. Here, we show examples of engineering research on the Engin-X instrument at the ISIS Pulsed Neutron Source, while also demonstrating how these may be combined with complementary measurements on other instruments.*8 March 2018* Manchester Inverse Imaging Goup Seminar: Alan Turing Building, Frank Adams 2 at 2pm Prof Bill Lionheart "Histotomography"
  12 March 2019 Lunch-and-Learn 12noon in Manchester, RAL and video-conf

Revision 20603 Jul 2019 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 26 to 26
 
  • 8 October 2019 TBA
  • 10 September 2019, Anton du Plessis (Stellenbosch CT Facility, South Africa) remote access; plus Ozan Öktem (provisional)
  • 9 July 2019 - Mike White / Bill Lionheart presentation on the Helgason-Ludwig consistency conditions, and Drishti-interface project, Mario Sandoval Olive
Added:
>
>
  • 2 July 2019 - Extra special research session: (att 19)
    • Ying Wang In-situ Studies of Damage Mechanisms in Composites
    • Wen Zhang The effect of anisotropic microstructure on the fatigue overload behaviour of ultrafine-grained nickel
    • Shelley Rawson Time-lapse 3D Imaging During The Compression Of Freeze Cast Aerogel By Phase Contrast Synchrotron X-ray Micro-CT
    • Chakri Gudla Initiation and short crack growth behaviour of environmentally induced cracks in AA5083 H131 investigated across time and length scales
    • Sam Johnston Diffraction Constrast Tomography
    • Sam McDonald Non-destructive mapping of crystallographic microstructure evolution in 3D by laboratory X-ray diffraction contrast tomography
    • Ryan Warr Developing Techniques in Colour X-ray CT Imaging
    • Evangelos Papoutsellis Multi-Channel tomographic reconstruction and analysis of the CCPi Core Imaging Library
    • James O'Sullivan What microCT can tell us about neglected tropical diseases
    • Parmesh Gajjar Using microCT to understand inhaled pharmaceutical powders
 
  • Monday 10 June 2019 - Joe Kelleher EnginX - part of the CCPi Working Group meeting (att 26+1+5) (WG att was 14 [11 physically in RAL + Llion, Peter and Bill])
  • Monday 3 June 2019 - Jason Wong “Challenges of imaging for trauma reconstruction- how you can help” Abstract- The talk will highlight the current state of the clinical art in terms of imaging that guides clinical decision making in trauma, and identifies where there are great unmet needs and opportunities to influence how clinical decision making is made in the trauma reconstruction setting and Katerina (Kathy) Christofidou (att 14)
  • .... above moved to be away from Fringe event 10 June 2019, and RAL Event on Tuesday 11 June 2019: see http://tyne.dl.ac.uk/twiki/bin/view/Visualisation/CCPiTomo

Revision 20525 Jun 2019 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 8 to 8
 
  • Lunch and Learn sessions at the University of Manchester MXIF at 12noon with pizza
  • Specialist seminars at locaions including mathematics departments etc...
Changed:
<
<
Next Seminar:
>
>
Recent and next Seminars:

Tuesday 9 July 2019 - Mike White / Bill Lionheart presentation on the Helgason-Ludwig consistency conditions, and Drishti-interface project, Mario Sandoval Olive

Abstracts here soon.

  Monday 10 June 2019 - Joe Kelleher EnginX - part of the CCPi Working Group meeting: video conference event ‘Neutron diffraction and imaging on Engin-X for multi-scale characterisation’. Abstract: Characterisation and analysis of engineering structures from the atomic up to the macroscale is often needed for a full understanding of their behaviour. Neutrons are a versatile probe for such characterisation, as the wavelengths of neutrons needed for diffraction from common crystalline materials can easily achieve penetrations of several centimetres in common engineering materials. Here, we show examples of engineering research on the Engin-X instrument at the ISIS Pulsed Neutron Source, while also demonstrating how these may be combined with complementary measurements on other instruments.
Line: 17 to 21
 
Lunch-and-Learn Sessions; often 12 noon - second Tuesday of the Month in Manchester (Royce Institute - Alan Turing Building / PSI)

Schedule:

Changed:
<
<
  • September 2019 - TBA
>
>
  • 10 December 2019 TBA
  • 12 November 2019 TBA
  • 8 October 2019 TBA
  • 10 September 2019, Anton du Plessis (Stellenbosch CT Facility, South Africa) remote access; plus Ozan Öktem (provisional)
 
  • 9 July 2019 - Mike White / Bill Lionheart presentation on the Helgason-Ludwig consistency conditions, and Drishti-interface project, Mario Sandoval Olive
  • Monday 10 June 2019 - Joe Kelleher EnginX - part of the CCPi Working Group meeting (att 26+1+5) (WG att was 14 [11 physically in RAL + Llion, Peter and Bill])
  • Monday 3 June 2019 - Jason Wong “Challenges of imaging for trauma reconstruction- how you can help” Abstract- The talk will highlight the current state of the clinical art in terms of imaging that guides clinical decision making in trauma, and identifies where there are great unmet needs and opportunities to influence how clinical decision making is made in the trauma reconstruction setting and Katerina (Kathy) Christofidou (att 14)

Revision 20411 Jun 2019 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 10 to 10
  Next Seminar:
Changed:
<
<
Monday 10 June 2019 - Joe Kelleher EnginX - part of the CCPi Working Group meeting: video conference event ‘Neutron diffraction and imaging on Engin-X for multi-scale characterisation’. Abstract: Characterisation and analysis of engineering structures from the atomic up to the macroscale is often needed for a full understanding of their behaviour. Neutrons are a versatile probe for such characterisation, as the wavelengths of neutrons needed for diffraction from common crystalline materials can easily achieve penetrations of several centimetres in common engineering materials. Here, we show examples of engineering research on the Engin-X instrument at the ISIS Pulsed Neutron Source, while also demonstrating how these may be combined with complementary measurements on other instruments.
>
>
Monday 10 June 2019 - Joe Kelleher EnginX - part of the CCPi Working Group meeting: video conference event ‘Neutron diffraction and imaging on Engin-X for multi-scale characterisation’. Abstract: Characterisation and analysis of engineering structures from the atomic up to the macroscale is often needed for a full understanding of their behaviour. Neutrons are a versatile probe for such characterisation, as the wavelengths of neutrons needed for diffraction from common crystalline materials can easily achieve penetrations of several centimetres in common engineering materials. Here, we show examples of engineering research on the Engin-X instrument at the ISIS Pulsed Neutron Source, while also demonstrating how these may be combined with complementary measurements on other instruments.
 
Line: 20 to 20
 
  • September 2019 - TBA
  • 9 July 2019 - Mike White / Bill Lionheart presentation on the Helgason-Ludwig consistency conditions, and Drishti-interface project, Mario Sandoval Olive
Changed:
<
<
  • Monday 10 June 2019 - Joe Kelleher EnginX - part of the CCPi Working Group meeting
>
>
  • Monday 10 June 2019 - Joe Kelleher EnginX - part of the CCPi Working Group meeting (att 26+1+5) (WG att was 14 [11 physically in RAL + Llion, Peter and Bill])
 
  • Monday 3 June 2019 - Jason Wong “Challenges of imaging for trauma reconstruction- how you can help” Abstract- The talk will highlight the current state of the clinical art in terms of imaging that guides clinical decision making in trauma, and identifies where there are great unmet needs and opportunities to influence how clinical decision making is made in the trauma reconstruction setting and Katerina (Kathy) Christofidou (att 14)
  • .... above moved to be away from Fringe event 10 June 2019, and RAL Event on Tuesday 11 June 2019: see http://tyne.dl.ac.uk/twiki/bin/view/Visualisation/CCPiTomo
  • 14 May 2019 - Wen Zhang Investigation of fatigue overload retardation mechanisms in Ni as a function of grain size; and Katrine Bangsgaard (att 20)

Revision 20309 Jun 2019 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 10 to 10
  Next Seminar:
Changed:
<
<
Monday 10 June 2019 - Joe Kelleher EnginX - part of the CCPi Working Group meeting: video conference event.
>
>
Monday 10 June 2019 - Joe Kelleher EnginX - part of the CCPi Working Group meeting: video conference event ‘Neutron diffraction and imaging on Engin-X for multi-scale characterisation’. Abstract: Characterisation and analysis of engineering structures from the atomic up to the macroscale is often needed for a full understanding of their behaviour. Neutrons are a versatile probe for such characterisation, as the wavelengths of neutrons needed for diffraction from common crystalline materials can easily achieve penetrations of several centimetres in common engineering materials. Here, we show examples of engineering research on the Engin-X instrument at the ISIS Pulsed Neutron Source, while also demonstrating how these may be combined with complementary measurements on other instruments.
 

Revision 20204 Jun 2019 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 10 to 10
  Next Seminar:
Changed:
<
<
Monday 3 June 2019 - Jason Wong “Challenges of imaging for trauma reconstruction- how you can help” Abstract- The talk will highlight the current state of the clinical art in terms of imaging that guides clinical decision making in trauma, and identifies where there are great unmet needs and opportunities to influence how clinical decision making is made in the trauma reconstruction setting. And Kathy Christofidou.
>
>
Monday 10 June 2019 - Joe Kelleher EnginX - part of the CCPi Working Group meeting: video conference event.
 
Line: 20 to 20
 
  • September 2019 - TBA
  • 9 July 2019 - Mike White / Bill Lionheart presentation on the Helgason-Ludwig consistency conditions, and Drishti-interface project, Mario Sandoval Olive
Changed:
<
<
  • Monday 10 June 2019 - Joe Kelleher EnginX - part of the CCPi Working Group meeting
  • Monday 3 June 2019 - Jason Wong and Katerina (Kathy) Christofidou
  • .... above moved to be away from Fringe event 10 June 2019, and RAL Event on Tuesday 11 June 2019: see http://tyne.dl.ac.uk/twiki/bin/view/Visualisation/CCPiTomo
  • 14 May 2019 - Wen Zhang Investigation of fatigue overload retardation mechanisms in Ni as a function of grain size; and Katrine Bangsgaard (att 20)
>
>
  • Monday 10 June 2019 - Joe Kelleher EnginX - part of the CCPi Working Group meeting
  • Monday 3 June 2019 - Jason Wong “Challenges of imaging for trauma reconstruction- how you can help” Abstract- The talk will highlight the current state of the clinical art in terms of imaging that guides clinical decision making in trauma, and identifies where there are great unmet needs and opportunities to influence how clinical decision making is made in the trauma reconstruction setting and Katerina (Kathy) Christofidou (att 14)
  • .... above moved to be away from Fringe event 10 June 2019, and RAL Event on Tuesday 11 June 2019: see http://tyne.dl.ac.uk/twiki/bin/view/Visualisation/CCPiTomo
  • 14 May 2019 - Wen Zhang Investigation of fatigue overload retardation mechanisms in Ni as a function of grain size; and Katrine Bangsgaard (att 20)
 
  • 9 April 2019 - Visitors from CCPi reconstruction code development teams - Flagship and Core (att 29)
  • 12 March 2019 Paul Bills - Huddersfield - d-XCT conference; Dan Symes CLF speaker on new Xray Sources; Tom Kirkham STFC connections; and Gemma Fardell, ICT conference; (att ~25) .... all before
  • ... Exec Meeting of CCPi held from 1pm (att 9)

Revision 20123 May 2019 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 18 to 18
  Schedule:
Changed:
<
<
  • 13 August 2019 - TBA
>
>
  • September 2019 - TBA
 
  • 9 July 2019 - Mike White / Bill Lionheart presentation on the Helgason-Ludwig consistency conditions, and Drishti-interface project, Mario Sandoval Olive
  • Monday 10 June 2019 - Joe Kelleher EnginX - part of the CCPi Working Group meeting
  • Monday 3 June 2019 - Jason Wong and Katerina (Kathy) Christofidou

Revision 20022 May 2019 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Seminars and vis sessions (http://tinyurl.com/STFCVisSem) across the sites:

Changed:
<
<
  • Tomo-and-Coffee Session: 3D Volume Data Visualisation: Software show-and-tell. Atlas Building - Atlas Visualisation Facility. Scheduled in the Atlas Building at the Harwell campus during sometimes the last Friday of each month from 2pm we have open sessions. Consisting of a short talks/show-and-tells along with opportunity to discuss visualisation needs with your data.
  • Lunch and Learn sessions at the University of Manchester MXIF at 12noon with pizza
  • Specialist seminars at locaions including mathematics departments etc...
>
>
  • Tomo-and-Coffee Session: 3D Volume Data Visualisation: Software show-and-tell. Atlas Building - Atlas Visualisation Facility. Scheduled in the Atlas Building at the Harwell campus during sometimes the last Friday of each month from 2pm we have open sessions. Consisting of a short talks/show-and-tells along with opportunity to discuss visualisation needs with your data.
  • Lunch and Learn sessions at the University of Manchester MXIF at 12noon with pizza
  • Specialist seminars at locaions including mathematics departments etc...
 
Changed:
<
<
Next Seminar:
>
>
Next Seminar:
 
Changed:
<
<
3 June 2019 Jason Wong and Kathy Christofidou.
>
>
Monday 3 June 2019 - Jason Wong “Challenges of imaging for trauma reconstruction- how you can help” Abstract- The talk will highlight the current state of the clinical art in terms of imaging that guides clinical decision making in trauma, and identifies where there are great unmet needs and opportunities to influence how clinical decision making is made in the trauma reconstruction setting. And Kathy Christofidou.
 
Line: 18 to 18
  Schedule:
Changed:
<
<
  • 13 August 2019 - TBA
  • 9 July 2019 - Mike White / Bill Lionheart presentation on the Helgason-Ludwig consistency conditions, and Drishti-interface project, Mario Sandoval Olive
>
>
  • 13 August 2019 - TBA
  • 9 July 2019 - Mike White / Bill Lionheart presentation on the Helgason-Ludwig consistency conditions, and Drishti-interface project, Mario Sandoval Olive
 
  • Monday 10 June 2019 - Joe Kelleher EnginX - part of the CCPi Working Group meeting
Changed:
<
<
  • Monday 3 June 2019 - Jason Wong and Katerina (Kathy) Christofidou
  • .... above moved to be away from Fringe event 10 June 2019, and RAL Event on Tuesday 11 June 2019: see http://tyne.dl.ac.uk/twiki/bin/view/Visualisation/CCPiTomo
  • 14 May 2019 - Wen Zhang Investigation of fatigue overload retardation mechanisms in Ni as a function of grain size; and Katrine Bangsgaard (att 20)
  • 9 April 2019 - Visitors from CCPi reconstruction code development teams - Flagship and Core (att 29)
  • 12 March 2019 Paul Bills - Huddersfield - d-XCT conference; Dan Symes CLF speaker on new Xray Sources; Tom Kirkham STFC connections; and Gemma Fardell, ICT conference; (att ~25) .... all before
  • ... Exec Meeting of CCPi held from 1pm (att 9)
  • 12 February 2019 Session on coatings (thermal, barrier, oxidation and corrosion resistant) Beatriz Mingo "Active Functionalization of ceramic coatings: incorporation of loaded nanotubes" and Nicolas Laugel, "Electrolytic plasma processes for metal surface modification"
  • 15 January 2019 Sarah Fisher - Progress in Laminography and Martin Turner New fast XCT facilities and Applications to the EPSRC Roadmap (att 20)
  • 11 December 2018 Experience from Jake Minns "Neural Networks in Tomography. From basic concepts to experiments on segmentation. A summer student project report" and Nghai Vo "Tomographic data for testing, demonstrating, and developing methods of removing ring artifacts" and "Python implementation of distortion correction methods for X-ray tomography" - https://zenodo.org/communities/ccpi (att 11+2+1)
>
>
  • Monday 3 June 2019 - Jason Wong and Katerina (Kathy) Christofidou
  • .... above moved to be away from Fringe event 10 June 2019, and RAL Event on Tuesday 11 June 2019: see http://tyne.dl.ac.uk/twiki/bin/view/Visualisation/CCPiTomo
  • 14 May 2019 - Wen Zhang Investigation of fatigue overload retardation mechanisms in Ni as a function of grain size; and Katrine Bangsgaard (att 20)
  • 9 April 2019 - Visitors from CCPi reconstruction code development teams - Flagship and Core (att 29)
  • 12 March 2019 Paul Bills - Huddersfield - d-XCT conference; Dan Symes CLF speaker on new Xray Sources; Tom Kirkham STFC connections; and Gemma Fardell, ICT conference; (att ~25) .... all before
  • ... Exec Meeting of CCPi held from 1pm (att 9)
  • 12 February 2019 Session on coatings (thermal, barrier, oxidation and corrosion resistant) Beatriz Mingo "Active Functionalization of ceramic coatings: incorporation of loaded nanotubes" and Nicolas Laugel, "Electrolytic plasma processes for metal surface modification"
  • 15 January 2019 Sarah Fisher - Progress in Laminography and Martin Turner New fast XCT facilities and Applications to the EPSRC Roadmap (att 20)
  • 11 December 2018 Experience from Jake Minns "Neural Networks in Tomography. From basic concepts to experiments on segmentation. A summer student project report" and Nghai Vo "Tomographic data for testing, demonstrating, and developing methods of removing ring artifacts" and "Python implementation of distortion correction methods for X-ray tomography" - https://zenodo.org/communities/ccpi (att 11+2+1)
 
  • "extra" informal session: 2:30pm Wednesday 5 December 2018 Julia Brettschneider and Wilfrid Kendall (Warwick University) "Investigating industrial CT scanner damage project with ATI" host Tristan Lowe (att 5)
Changed:
<
<
  • 13 November 2018 !ToScA (and other events); Chakri Gudla "Multiscale correlative characterization of environmentally assisted crack initiation, propagation and failure in a high strength aa5083 h131 alloy" and Sam Johnston "Non destructive 3D grain imaging in aeroengine materials by diffraction contrast tomography" (att 23)
  • 2 October 2018 Brian Bay "DVC" and Daniil Kazantzev "Tomophantom package" - at RAL v-conf to Manchester (att 28+6)
  • 10 July 2018 ICAL Russell Garwood ; and new (scalable) reconstruction package from the MTC Nick Brierley (att 22)
>
>
  • 13 November 2018 ToScA (and other events); Chakri Gudla "Multiscale correlative characterization of environmentally assisted crack initiation, propagation and failure in a high strength aa5083 h131 alloy" and Sam Johnston "Non destructive 3D grain imaging in aeroengine materials by diffraction contrast tomography" (att 23)
  • 2 October 2018 Brian Bay "DVC" and Daniil Kazantzev "Tomophantom package" - at RAL v-conf to Manchester (att 28+6)
  • 10 July 2018 ICAL Russell Garwood ; and new (scalable) reconstruction package from the MTC Nick Brierley (att 22)
 
  • 12 June 2018 Jakob Jorgensen and Parmesh Gajjar "Advancing automated temporal-CT capabilities of laboratory μXCT machines" (att 11)
  • 8 May 2018 Wenjuan Sun and Stephen Brown NPL; Title: Recent development in dimensional X-ray computed tomography at NPL for advanced manufacturing (att 19)
  • 10 April 2018 - Genoveva Burca, Instrument Scientist - IMAT, ISIS Facility "IMAT- neutron imaging and diffraction instrument for materials science at the ISIS neutron spallation source" (att 21)
Line: 43 to 43
 
  • 13 December 2017 - CIL CCPi Sri Nagella (att 19)
  • 7 November 2017 - Nick Curry An Investigation into Rust Layer Microstructure (att 30)
  • 13 September 2017 - Alistair Garner Advanced 3D characterisation of iodine-induced stress corrosion cracks in zirconium alloys Jose Godhino BP summer placements (att 22)
Changed:
<
<
  • 9 August 2017 - Nghai Vo "Developments of image processing techniques for tomographic data at synchrotron facilities" from Diamond Light Source; Martin Turner on dXCT activities (att 22)
>
>
  • 9 August 2017 - Nghai Vo "Developments of image processing techniques for tomographic data at synchrotron facilities" from Diamond Light Source; Martin Turner on dXCT activities (att 22)
 
  • 19 October 2016 - review at Manchester on ToScA
  • 18 May 2016 - inc a follow on Training Session with Parmesh Gajjar on hacking the Nikon imaging devices (initially the custom bay units).
  • 16 March 2016 - Michael McCarthy (NPL), University of Manchester HMXIF, "Industrial XCT: Current develops of a dimensional verification standard for XCT (ISO 10360)”
Line: 52 to 52
  Proposals:
Changed:
<
<
  • new CCPi Flagship results
>
>
  • new CCPi Flagship results
 
  • PhD project pre-results
  • ENGINX J Kelleher
  • Jason Wong (plastic surgeon - major trauma) Imaging needs described
Changed:
<
<
  • Invite Phil Childs - to !UoM - stories of measurement standards.
>
>
  • Invite Phil Childs - to UoM - stories of measurement standards.
 
  • ...
Extra Specialist Seminars:
Line: 318 to 318
 
Friday 20th August 2013 tn_tncAug-13.jpg The Hartee Centre in collaboration with Harwell Imaging Partnership (HIP) has opened a visualisation facility in the Atlas building in RAL. This is located in the CR08 room which is fully refurbished and fitted with an immersive 3D system including head tracking.The aim is for software sharing and dissemination; and to this end a three year software contract for Avizo (3D Volume Visualisation from VSG[FEI]) has been purchased across SCD, DLS and RCaH.There is a dedicated 10GbE network connection between this room and the Hartree Centre’s IBM BlueGene and Blue Wonder computers at Daresbury Lab for visualising application results. This facility also has two high memory visualisation machine each with ˝ TB RAM. They are installed with most of the popular open source visualisation applications and some commercial applications including Avizo (http://www.vsg3d.com/avizo/overview); ideal for example for quantitative visualisation of tomographic image volumes as collected at Diamond.
Meeting List 2015-2016: Tomo-Coffee and training vis events; so far, 9 attendees.
Changed:
<
<
  • Novitom inc at RAL and link to Manchester 12 September 2016 [8+1](9)
  • Lucia Mancini 7 October 2016 (28)
>
>
  • Novitom inc at RAL and link to Manchester 12 September 2016 [8+1](9)
  • Lucia Mancini 7 October 2016 (28)
 
  • Mark Basham, Imano Luengo, Michele Darrow SuRVoS 31 January 2017 (29; 24+5)
  • Hamish Carr 9 February 2017 (16)
  • Flagship meeting 20 March 2017 ()
Line: 328 to 328
 Total first three years - 551 attendees

Meeting List 2015-2016: Tomo-Coffee and ParaView events; 184+ attendees.

Changed:
<
<
  • Seminars alternative to an Away Day up to ToScA in Manchester for 2 September 2015 (27)
>
>
  • Seminars alternative to an Away Day up to ToScA in Manchester for 2 September 2015 (27)
 
  • Monday 19 October 2015 - DREAM3D (9+4+??)
  • Friday 30 October 2015 - Antoniu Pop (11)
  • Thursday 26 November 2015 - Not yet becoming IronMan – but software for Touchable Scientific Visualisations (12)
Line: 339 to 339
 
  • 6 July, 11 July and 14 July 2016 - special meetings for vis review (??)
  • Friday 11 August 2016 - CCPi Interactive Vis (12)
  • Friday 11 July 2016 - TIGRE launch (10)
Changed:
<
<
  • 12 September 2016 (4 + 9) 8 September 2016 (14) TomViz.org demonstrator [29]
>
>
  • 12 September 2016 (4 + 9) 8 September 2016 (14) TomViz.org demonstrator [29]
  Meeting List 2014-2015: Tomo-Coffee and ParaView events; 203 attendees.
Changed:
<
<
  • Paraview - 28 August 2014 TomViz (18) Meet the author
  • Monday 8 September 2014 Drishti visualiser - Meet the author (am 15; pm 5)
  • Friday 26 September 2014 "Image-based simulation of diffusion and flows within experimental volumetric data sets" Dr Marcus Campbell Bannerman, University of Aberdeen (26)
  • Friday 10 October 2014 Russell Garwood "Open source software for visualising tomographic datasets" (16)
  • Wednesday 26 November 2014. Sam Worthington (Worthington Sharpe Ltd.) Title "Wing: Beyond the mouse". At Daresbury Labs (STFC) A1 Rylands (10)
  • Friday 12 December 2014 - Talk by Prof Sarah Hainsworth, University of Leicester(27+)
  • Thursday 18 December 2014 - Data and Visualisation Needs Survey , Martin Turner, Tim Morris and Ron Fowler (9)
  • Friday 27 February 2015 - Fast X-ray reconstructioon and IMAT framework (18+3+5 - three site meetings)
>
>
  • Paraview - 28 August 2014 TomViz (18) Meet the author
  • Monday 8 September 2014 Drishti visualiser - Meet the author (am 15; pm 5)
  • Friday 26 September 2014 "Image-based simulation of diffusion and flows within experimental volumetric data sets" Dr Marcus Campbell Bannerman, University of Aberdeen (26)
  • Friday 10 October 2014 Russell Garwood "Open source software for visualising tomographic datasets" (16)
  • Wednesday 26 November 2014. Sam Worthington (Worthington Sharpe Ltd.) Title "Wing: Beyond the mouse". At Daresbury Labs (STFC) A1 Rylands (10)
  • Friday 12 December 2014 - Talk by Prof Sarah Hainsworth, University of Leicester(27+)
  • Thursday 18 December 2014 - Data and Visualisation Needs Survey , Martin Turner, Tim Morris and Ron Fowler (9)
  • Friday 27 February 2015 - Fast X-ray reconstructioon and IMAT framework (18+3+5 - three site meetings)
 
  • Friday 27 March 2015 - Image Analysis program from NOCTYlab (10)
  • Friday 24 April 2015 - Avizo VR Module Demonstration (7) Extra session on 7 May 2015 (8)
  • Open Day events on 8-11 July 2015, pre-event (6)
  • Seminars alternative to an Away Day up to ToScA in Manchester for 2 September 2015 (27)

Season 2013-2014: 12 Tomo-Coffee events and one ParaView event; 164 attendees. Meeting List:

Changed:
<
<
  • Pre-meeting to check software suitability on 20 August 2013 (4)
  • Friday 27 September 2013 "Vis Software - Commercial to Open Source" (23)
  • Friday 25 October 2013 volume visualisation with drishti (14)
  • Friday 29 November 2013 "Quantitative Visualisation from the CCPi CCPForge repository: VolView and Avizo" Download modules from: http://ccpforge.cse.rl.ac.uk/gf/project/iqa/frs/ (17)
  • Friday 20 December 2013 Data show and understand session (8)
  • Friday 31 January 2014 NIRFAST (12)
  • Friday 28 February 2014 MANTID (11)
  • Paraview - 19 March 2104 Intro (6)
  • Friday 28 March 2014 LaVision (24)
  • Thursday 8 May 2014 Avizo 8.1 8.01 training course (14)
  • Friday 30 May 2013 Paraview as Volume Visualisation (14)
  • Thursday 26 June 2014 Diamond DAWN system (5) [Friday 25 April Diamond DAWN system (Postponed - 4)]
  • Friday 1 August 2014 Data show and understand session (12, inc demos)
>
>
  • Pre-meeting to check software suitability on 20 August 2013 (4)
  • Friday 27 September 2013 "Vis Software - Commercial to Open Source" (23)
  • Friday 25 October 2013 volume visualisation with drishti (14)
  • Friday 29 November 2013 "Quantitative Visualisation from the CCPi CCPForge repository: VolView and Avizo" Download modules from: http://ccpforge.cse.rl.ac.uk/gf/project/iqa/frs/ (17)
  • Friday 20 December 2013 Data show and understand session (8)
  • Friday 31 January 2014 NIRFAST (12)
  • Friday 28 February 2014 MANTID (11)
  • Paraview - 19 March 2104 Intro (6)
  • Friday 28 March 2014 LaVision (24)
  • Thursday 8 May 2014 Avizo 8.1 8.01 training course (14)
  • Friday 30 May 2013 Paraview as Volume Visualisation (14)
  • Thursday 26 June 2014 Diamond DAWN system (5) [Friday 25 April Diamond DAWN system (Postponed - 4)]
  • Friday 1 August 2014 Data show and understand session (12, inc demos)
  Possible topics:
Changed:
<
<
  • CCPi - Reconstruction techniques
>
>
  • CCPi - Reconstruction techniques
 
  • Facilities available; eg RCaH
  • Conferences and Links eg ToScA
  • Other Segmentation methods and experience
Line: 482 to 482
  28 April 2015, Developers' Day at Manchester Workshop to focus on iterative solutions for the XTek machines (such as the released CGLS code) and what is required to get them into regular usage in the labs that use these machines. 11am-4pm.
Changed:
<
<
27-30 April 2015 Physics & Software PET-MR training school this April in Leeds. If any early stage researchers wishes to attend (Masters, PhDs, or Post-Docs) might be possible to attend for free if they express their interest on time (UK-affiliated researchers are welcome to apply). http://www.pet-mri.eu/PETMR_School_15.html
>
>
27-30 April 2015 Physics & Software PET-MR training school this April in Leeds. If any early stage researchers wishes to attend (Masters, PhDs, or Post-Docs) might be possible to attend for free if they express their interest on time (UK-affiliated researchers are welcome to apply). <a target="_top" href="http://www.pet-mri.eu/PETMR_School_15.html" style="color: #666666; font-family: arial, verdana, sans-serif; font-size: 13.6499996185303px; line-height: 20.4749984741211px; background-color: #ffffff">http://www.pet-mri.eu/PETMR_School_15.html</a>
  Training Diamond Manchester Collaboration, CCPi and HIP, the University of Manchester and Diamond Light Source will be running a 2 day course on the Visualisation and quantification of tomographic data. The course will be based both around open-source software (ImageJ) and commercial software AVIZO Software course. This is the fourth training course of this kind to be offered by the Diamond Manchester Collaboration and will be on the 16th and 17th of April 2015 at Diamond Light Source. The course will consist of a lecture and hands-on exercises intended for new or existing users of Avizo software. Attendee capacity for the training is limited to 25 so if you are interested please register with me at your earliest opportunity. As we are also training future trainers, people volunteering to help in future courses will be given priority.

Revision 19921 May 2019 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 10 to 10
  Next Seminar:
Changed:
<
<
3 June 2019
>
>
3 June 2019 Jason Wong and Kathy Christofidou.
 
Line: 19 to 19
 Schedule:

  • 13 August 2019 - TBA
Changed:
<
<
  • 9 July 2019 - Mike White / Bill Lionheart presentation on the Helgason-Ludwig consistency conditions, + Drishti-interface project, Mario + TBA
>
>
  • 9 July 2019 - Mike White / Bill Lionheart presentation on the Helgason-Ludwig consistency conditions, and Drishti-interface project, Mario Sandoval Olive
 
  • Monday 10 June 2019 - Joe Kelleher EnginX - part of the CCPi Working Group meeting
Changed:
<
<
  • Monday 3 June 2019 - Jason Wong and Katerina christofidou
>
>
  • Monday 3 June 2019 - Jason Wong and Katerina (Kathy) Christofidou
 
  • .... above moved to be away from Fringe event 10 June 2019, and RAL Event on Tuesday 11 June 2019: see http://tyne.dl.ac.uk/twiki/bin/view/Visualisation/CCPiTomo
  • 14 May 2019 - Wen Zhang Investigation of fatigue overload retardation mechanisms in Ni as a function of grain size; and Katrine Bangsgaard (att 20)
  • 9 April 2019 - Visitors from CCPi reconstruction code development teams - Flagship and Core (att 29)

Revision 19815 May 2019 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 10 to 10
  Next Seminar:
Changed:
<
<
14 May 2019: Wen Zhang Title: Investigation of fatigue overload retardation mechanisms in Ni as a function of grain size

Abstract: Overload fatigue test results are presented for high purity nickel with grain sizes ranging from micrometres down to nanometres. Synchrotron X-ray diffraction (SXRD) and digital image correlation (DIC) were applied in situ to map the through-thickness strain field and surface displacement field respectively before, during and after overload. The variation in residual stress and stress intensity factor (SIF) was evaluated from the diffraction strain field while the changes of crack length, crack opening displacement and SIF range were determined from the DIC displacement field. Retardation was observed for all the samples at low stress ratio (R=0.1). The fatigue crack growth (FCG) for the microcrystalline sample (grain size greater than 1 µm) was the most retarded after overload because of its more tortuous and rougher crack surface, larger overload plastic zone and hence more significant crack face contact. While for the nanocrystalline sample (grain size below 100 nm) the FCG was least affected by overload due to the relatively straight and flat crack surface, very small plastic zone size and therefore limited residual stress and no evident crack closure. The decrease in FCG for ultrafine grained (UFG) nickel (with grain size between 1 µm and 100 nm) is not only resulted from overload-induced residual stress and crack closure, but also the crack deflection caused by the anisotropic microstructure. More significant residual stress and crack closure were observed for the UFG sample with elongated microstructure aligned perpendicular to the crack propagation direction.

and Katrine Bangsgaard Title TBA

>
>
3 June 2019
 
Line: 24 to 20
 
  • 13 August 2019 - TBA
  • 9 July 2019 - Mike White / Bill Lionheart presentation on the Helgason-Ludwig consistency conditions, + Drishti-interface project, Mario + TBA
Changed:
<
<
  • 10 June 2019 - Joe Kelleher EnginX - part of the CCPi Working Group meeting
  • Monday 3 June 2019 - Jason Wong
>
>
  • Monday 10 June 2019 - Joe Kelleher EnginX - part of the CCPi Working Group meeting
  • Monday 3 June 2019 - Jason Wong and Katerina christofidou
 
Changed:
<
<
  • 14 May 2019 - Wen Zhang Investigation of fatigue overload retardation mechanisms in Ni as a function of grain size; and Katrine Bangsgaard
>
>
  • 14 May 2019 - Wen Zhang Investigation of fatigue overload retardation mechanisms in Ni as a function of grain size; and Katrine Bangsgaard (att 20)
 
  • 9 April 2019 - Visitors from CCPi reconstruction code development teams - Flagship and Core (att 29)
  • 12 March 2019 Paul Bills - Huddersfield - d-XCT conference; Dan Symes CLF speaker on new Xray Sources; Tom Kirkham STFC connections; and Gemma Fardell, ICT conference; (att ~25) .... all before
  • ... Exec Meeting of CCPi held from 1pm (att 9)

Revision 19708 May 2019 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 14 to 14
  Abstract: Overload fatigue test results are presented for high purity nickel with grain sizes ranging from micrometres down to nanometres. Synchrotron X-ray diffraction (SXRD) and digital image correlation (DIC) were applied in situ to map the through-thickness strain field and surface displacement field respectively before, during and after overload. The variation in residual stress and stress intensity factor (SIF) was evaluated from the diffraction strain field while the changes of crack length, crack opening displacement and SIF range were determined from the DIC displacement field. Retardation was observed for all the samples at low stress ratio (R=0.1). The fatigue crack growth (FCG) for the microcrystalline sample (grain size greater than 1 µm) was the most retarded after overload because of its more tortuous and rougher crack surface, larger overload plastic zone and hence more significant crack face contact. While for the nanocrystalline sample (grain size below 100 nm) the FCG was least affected by overload due to the relatively straight and flat crack surface, very small plastic zone size and therefore limited residual stress and no evident crack closure. The decrease in FCG for ultrafine grained (UFG) nickel (with grain size between 1 µm and 100 nm) is not only resulted from overload-induced residual stress and crack closure, but also the crack deflection caused by the anisotropic microstructure. More significant residual stress and crack closure were observed for the UFG sample with elongated microstructure aligned perpendicular to the crack propagation direction.
Changed:
<
<
and Katrine Bangsgaard Title TBA
>
>
and Katrine Bangsgaard Title TBA
 
Line: 24 to 24
 
  • 13 August 2019 - TBA
  • 9 July 2019 - Mike White / Bill Lionheart presentation on the Helgason-Ludwig consistency conditions, + Drishti-interface project, Mario + TBA
Added:
>
>
  • 10 June 2019 - Joe Kelleher EnginX - part of the CCPi Working Group meeting
 
Changed:
<
<
  • 14 May 2019 - Wen Zhang Investigation of fatigue overload retardation mechanisms in Ni as a function of grain size; and Katrine Bangsgaard
>
>
  • 14 May 2019 - Wen Zhang Investigation of fatigue overload retardation mechanisms in Ni as a function of grain size; and Katrine Bangsgaard
 
  • 9 April 2019 - Visitors from CCPi reconstruction code development teams - Flagship and Core (att 29)
  • 12 March 2019 Paul Bills - Huddersfield - d-XCT conference; Dan Symes CLF speaker on new Xray Sources; Tom Kirkham STFC connections; and Gemma Fardell, ICT conference; (att ~25) .... all before
  • ... Exec Meeting of CCPi held from 1pm (att 9)

Revision 19608 May 2019 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 12 to 12
  14 May 2019: Wen Zhang Title: Investigation of fatigue overload retardation mechanisms in Ni as a function of grain size
Changed:
<
<

Abstract: Overload fatigue test results are presented for high purity nickel with grain sizes ranging from micrometres down to nanometres. Synchrotron X-ray diffraction (SXRD) and digital image correlation (DIC) were applied in situ to map the through-thickness strain field and surface displacement field respectively before, during and after overload. The variation in residual stress and stress intensity factor (SIF) was evaluated from the diffraction strain field while the changes of crack length, crack opening displacement and SIF range were determined from the DIC displacement field. Retardation was observed for all the samples at low stress ratio (R=0.1). The fatigue crack growth (FCG) for the microcrystalline sample (grain size greater than 1 µm) was the most retarded after overload because of its more tortuous and rougher crack surface, larger overload plastic zone and hence more significant crack face contact. While for the nanocrystalline sample (grain size below 100 nm) the FCG was least affected by overload due to the relatively straight and flat crack surface, very small plastic zone size and therefore limited residual stress and no evident crack closure. The decrease in FCG for ultrafine grained (UFG) nickel (with grain size between 1 µm and 100 nm) is not only resulted from overload-induced residual stress and crack closure, but also the crack deflection caused by the anisotropic microstructure. More significant residual stress and crack closure were observed for the UFG sample with elongated microstructure aligned perpendicular to the crack propagation direction.
>
>
Abstract: Overload fatigue test results are presented for high purity nickel with grain sizes ranging from micrometres down to nanometres. Synchrotron X-ray diffraction (SXRD) and digital image correlation (DIC) were applied in situ to map the through-thickness strain field and surface displacement field respectively before, during and after overload. The variation in residual stress and stress intensity factor (SIF) was evaluated from the diffraction strain field while the changes of crack length, crack opening displacement and SIF range were determined from the DIC displacement field. Retardation was observed for all the samples at low stress ratio (R=0.1). The fatigue crack growth (FCG) for the microcrystalline sample (grain size greater than 1 µm) was the most retarded after overload because of its more tortuous and rougher crack surface, larger overload plastic zone and hence more significant crack face contact. While for the nanocrystalline sample (grain size below 100 nm) the FCG was least affected by overload due to the relatively straight and flat crack surface, very small plastic zone size and therefore limited residual stress and no evident crack closure. The decrease in FCG for ultrafine grained (UFG) nickel (with grain size between 1 µm and 100 nm) is not only resulted from overload-induced residual stress and crack closure, but also the crack deflection caused by the anisotropic microstructure. More significant residual stress and crack closure were observed for the UFG sample with elongated microstructure aligned perpendicular to the crack propagation direction.

and Katrine Bangsgaard Title TBA

 
Line: 24 to 26
 
  • 9 July 2019 - Mike White / Bill Lionheart presentation on the Helgason-Ludwig consistency conditions, + Drishti-interface project, Mario + TBA
  • Monday 3 June 2019 - Jason Wong
  • .... above moved to be away from Fringe event 10 June 2019, and RAL Event on Tuesday 11 June 2019: see http://tyne.dl.ac.uk/twiki/bin/view/Visualisation/CCPiTomo
Changed:
<
<
  • 14 May 2019 - Wen Zhang Investigation of fatigue overload retardation mechanisms in Ni as a function of grain size
>
>
  • 14 May 2019 - Wen Zhang Investigation of fatigue overload retardation mechanisms in Ni as a function of grain size; and Katrine Bangsgaard
 
  • 9 April 2019 - Visitors from CCPi reconstruction code development teams - Flagship and Core (att 29)
  • 12 March 2019 Paul Bills - Huddersfield - d-XCT conference; Dan Symes CLF speaker on new Xray Sources; Tom Kirkham STFC connections; and Gemma Fardell, ICT conference; (att ~25) .... all before
  • ... Exec Meeting of CCPi held from 1pm (att 9)

Revision 19530 Apr 2019 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 10 to 10
  Next Seminar:
Changed:
<
<
14 May 2019: See details below
>
>
14 May 2019: Wen Zhang Title: Investigation of fatigue overload retardation mechanisms in Ni as a function of grain size


Abstract: Overload fatigue test results are presented for high purity nickel with grain sizes ranging from micrometres down to nanometres. Synchrotron X-ray diffraction (SXRD) and digital image correlation (DIC) were applied in situ to map the through-thickness strain field and surface displacement field respectively before, during and after overload. The variation in residual stress and stress intensity factor (SIF) was evaluated from the diffraction strain field while the changes of crack length, crack opening displacement and SIF range were determined from the DIC displacement field. Retardation was observed for all the samples at low stress ratio (R=0.1). The fatigue crack growth (FCG) for the microcrystalline sample (grain size greater than 1 µm) was the most retarded after overload because of its more tortuous and rougher crack surface, larger overload plastic zone and hence more significant crack face contact. While for the nanocrystalline sample (grain size below 100 nm) the FCG was least affected by overload due to the relatively straight and flat crack surface, very small plastic zone size and therefore limited residual stress and no evident crack closure. The decrease in FCG for ultrafine grained (UFG) nickel (with grain size between 1 µm and 100 nm) is not only resulted from overload-induced residual stress and crack closure, but also the crack deflection caused by the anisotropic microstructure. More significant residual stress and crack closure were observed for the UFG sample with elongated microstructure aligned perpendicular to the crack propagation direction.

 
Line: 22 to 24
 
  • 9 July 2019 - Mike White / Bill Lionheart presentation on the Helgason-Ludwig consistency conditions, + Drishti-interface project, Mario + TBA
  • Monday 3 June 2019 - Jason Wong
  • .... above moved to be away from Fringe event 10 June 2019, and RAL Event on Tuesday 11 June 2019: see http://tyne.dl.ac.uk/twiki/bin/view/Visualisation/CCPiTomo
Changed:
<
<
  • 14 May 2019 - Wen Zhang
>
>
  • 14 May 2019 - Wen Zhang Investigation of fatigue overload retardation mechanisms in Ni as a function of grain size
 
  • 9 April 2019 - Visitors from CCPi reconstruction code development teams - Flagship and Core (att 29)
  • 12 March 2019 Paul Bills - Huddersfield - d-XCT conference; Dan Symes CLF speaker on new Xray Sources; Tom Kirkham STFC connections; and Gemma Fardell, ICT conference; (att ~25) .... all before
  • ... Exec Meeting of CCPi held from 1pm (att 9)

Revision 19430 Apr 2019 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 18 to 18
  Schedule:
Changed:
<
<
  • August 2019 - TBA
>
>
  • 13 August 2019 - TBA
 
  • 9 July 2019 - Mike White / Bill Lionheart presentation on the Helgason-Ludwig consistency conditions, + Drishti-interface project, Mario + TBA
Changed:
<
<
  • Monday 3 June 2019 - Jason Wong -- moved to be away from Fringe event 10 June 2019, and RAL Event on Tuesday 11 June 2019.
  • 14 May 2019 - Wen Zhang ""
>
>
 
  • 9 April 2019 - Visitors from CCPi reconstruction code development teams - Flagship and Core (att 29)
  • 12 March 2019 Paul Bills - Huddersfield - d-XCT conference; Dan Symes CLF speaker on new Xray Sources; Tom Kirkham STFC connections; and Gemma Fardell, ICT conference; (att ~25) .... all before
  • ... Exec Meeting of CCPi held from 1pm (att 9)

Revision 19329 Apr 2019 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 10 to 10
  Next Seminar:
Changed:
<
<
14 May 2019: Sesion to fill.
>
>
14 May 2019: See details below
 
Line: 20 to 20
 
  • August 2019 - TBA
  • 9 July 2019 - Mike White / Bill Lionheart presentation on the Helgason-Ludwig consistency conditions, + Drishti-interface project, Mario + TBA
Changed:
<
<
  • Monday 3 June 2019 - Jason Wong -- moved to be away from Fringe event 10 June 2019, and RAL Event on Tuesday 11 June 2019.
  • 14 May 2019 - TBA
>
>
  • Monday 3 June 2019 - Jason Wong -- moved to be away from Fringe event 10 June 2019, and RAL Event on Tuesday 11 June 2019.
  • 14 May 2019 - Wen Zhang ""
 
  • 9 April 2019 - Visitors from CCPi reconstruction code development teams - Flagship and Core (att 29)
  • 12 March 2019 Paul Bills - Huddersfield - d-XCT conference; Dan Symes CLF speaker on new Xray Sources; Tom Kirkham STFC connections; and Gemma Fardell, ICT conference; (att ~25) .... all before
  • ... Exec Meeting of CCPi held from 1pm (att 9)

Revision 19226 Apr 2019 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 20 to 20
 
  • August 2019 - TBA
  • 9 July 2019 - Mike White / Bill Lionheart presentation on the Helgason-Ludwig consistency conditions, + Drishti-interface project, Mario + TBA
Changed:
<
<
  • Monday 10 June 2019 moved to be next to Fringe event, as major RAL Event on Tuesday 11 June 2019.
  • 14 May 2019 - Charlotte Hagen +TBA
>
>
  • Monday 3 June 2019 - Jason Wong -- moved to be away from Fringe event 10 June 2019, and RAL Event on Tuesday 11 June 2019.
  • 14 May 2019 - TBA
 
  • 9 April 2019 - Visitors from CCPi reconstruction code development teams - Flagship and Core (att 29)
  • 12 March 2019 Paul Bills - Huddersfield - d-XCT conference; Dan Symes CLF speaker on new Xray Sources; Tom Kirkham STFC connections; and Gemma Fardell, ICT conference; (att ~25) .... all before
  • ... Exec Meeting of CCPi held from 1pm (att 9)

Revision 19116 Apr 2019 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 19 to 19
 Schedule:

  • August 2019 - TBA
Changed:
<
<
  • 9 July 2019 - Mike White / Bill Lionheart presentation on the Helgason-Ludwig consistency conditions, + Drishti-interface project, Mario
>
>
  • 9 July 2019 - Mike White / Bill Lionheart presentation on the Helgason-Ludwig consistency conditions, + Drishti-interface project, Mario + TBA
 
  • Monday 10 June 2019 moved to be next to Fringe event, as major RAL Event on Tuesday 11 June 2019.
Changed:
<
<
  • 14 May 2019 - TBA
>
>
  • 14 May 2019 - Charlotte Hagen +TBA
 
  • 9 April 2019 - Visitors from CCPi reconstruction code development teams - Flagship and Core (att 29)
  • 12 March 2019 Paul Bills - Huddersfield - d-XCT conference; Dan Symes CLF speaker on new Xray Sources; Tom Kirkham STFC connections; and Gemma Fardell, ICT conference; (att ~25) .... all before
  • ... Exec Meeting of CCPi held from 1pm (att 9)

Revision 19015 Apr 2019 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 10 to 10
  Next Seminar:
Changed:
<
<
12 March 2019 Lunch-and-Learn 12noon in Manchester, RAL and video-conf

Please register here: https://forms.office.com/Pages/ResponsePage.aspx?id=HDZmP36oWEGPYZnoLbPKyIoNg6mJSW5Jp6v4v7D_cv9UNFZIOEtCOVdLU0k4T0pCQjBVWTE0MVpCRy4u

Dan Symes and Ceri Brenner:

"Tomographic imaging using intense laser-driven radiation sources": High power lasers (> 100 TW) can be used as the driver for compact light sources that deliver extreme brightness ultrashort x-ray pulses ideally suited for advanced imaging applications. The laser is used to create a cm-scale plasma accelerator generating femtosecond relativistic electron bunches with GeV? energy that can be converted to x-ray beams through a plasma betatron process or bremsstrahlung radiation. This produces up to 1010 photons per pulse in the x-ray region spanning 10 keV up to multi-MeV. The beam is spatially coherent because of the micron-scale source size, enabling phase enhanced imaging to improve contrast between low Z materials with similar density. Using the Gemini laser at RAL we have demonstrated high resolution micro-CT of biological samples and NDE of industrial components. The same laser can generate x-ray energies in the 10’s keV range for soft tissue, low density polymer and composite materials and in the multi-MeV range for penetration of large dense samples such as automotive or aerospace components. Commercialisation of high power laser technology has led to robust, well-characterised systems that are relatively compact and affordable. In the next few years, we expect to develop laser-plasma accelerators as dedicated x-ray machines, capable of micron resolution tomography with high frame rate. This shift from conducting proof-of-principle experiments to operating a synchrotron-style beam brings challenges for our research community – it is necessary for us to build expertise in handling large datasets, image processing, and tomographic reconstruction. We will present the status of CT using laser-driven sources with a view to discussion of how we can engage with the imaging community and what new opportunities may arise for the CCPi network.

dimensional-XCT conference update from Huddersfield, Paul Bills

A Hartree Perspective: Working with STFC Opportunities - Tim Kirkham (12:45pm)

The Bridging for Innovators https://www.stfc.ac.uk/b4i programme runs across all STFC facilities and gives business the opportunity to work with STFC facilities and Scientists on up to a full funded basis. There is an opportunity to strengthen links between STFC and Universities by businesses linked to Universities working on this programme to combine expertise. Such an opportunity exists potentially at centres such as the Royce, and this talk will give an over view of this opportunity and welcome ideas to stimulate collaboration.

Introduction new staff and description of ICT'2019, Gemma Fardell

...presenting her experiences to data including work at Nikon Metrolgy and plans for the future - also review of iCT ...'very application heavy this year. Every other year it is based in Wels, and ... little more research orientated. The industry talks only take up one morning, and there was a lot of input from research groups around Europe. This year ~350 attendees, so the conference is probably the largest XCT one in Europe - there were a couple of posters on multi-spectral CT, and reconstruction is always a popular topic."

>
>
14 May 2019: Sesion to fill.
 
Line: 40 to 18
  Schedule:
Changed:
<
<
  • 9 July 2019 - Mike White / Bill Lionheart presentation on the Helgason-Ludwig consistency conditions,
>
>
  • August 2019 - TBA
  • 9 July 2019 - Mike White / Bill Lionheart presentation on the Helgason-Ludwig consistency conditions, + Drishti-interface project, Mario
 
  • Monday 10 June 2019 moved to be next to Fringe event, as major RAL Event on Tuesday 11 June 2019.
  • 14 May 2019 - TBA
  • 9 April 2019 - Visitors from CCPi reconstruction code development teams - Flagship and Core (att 29)
Line: 81 to 60
  8 March 2018 Manchester Inverse Imaging Goup Seminar: Alan Turing Building, Frank Adams 2 at 2pm Prof Bill Lionheart "Histotomography"
Added:
>
>
12 March 2019 Lunch-and-Learn 12noon in Manchester, RAL and video-conf

Please register here: https://forms.office.com/Pages/ResponsePage.aspx?id=HDZmP36oWEGPYZnoLbPKyIoNg6mJSW5Jp6v4v7D_cv9UNFZIOEtCOVdLU0k4T0pCQjBVWTE0MVpCRy4u

Dan Symes and Ceri Brenner:

"Tomographic imaging using intense laser-driven radiation sources": High power lasers (> 100 TW) can be used as the driver for compact light sources that deliver extreme brightness ultrashort x-ray pulses ideally suited for advanced imaging applications. The laser is used to create a cm-scale plasma accelerator generating femtosecond relativistic electron bunches with GeV? energy that can be converted to x-ray beams through a plasma betatron process or bremsstrahlung radiation. This produces up to 1010 photons per pulse in the x-ray region spanning 10 keV up to multi-MeV. The beam is spatially coherent because of the micron-scale source size, enabling phase enhanced imaging to improve contrast between low Z materials with similar density. Using the Gemini laser at RAL we have demonstrated high resolution micro-CT of biological samples and NDE of industrial components. The same laser can generate x-ray energies in the 10’s keV range for soft tissue, low density polymer and composite materials and in the multi-MeV range for penetration of large dense samples such as automotive or aerospace components. Commercialisation of high power laser technology has led to robust, well-characterised systems that are relatively compact and affordable. In the next few years, we expect to develop laser-plasma accelerators as dedicated x-ray machines, capable of micron resolution tomography with high frame rate. This shift from conducting proof-of-principle experiments to operating a synchrotron-style beam brings challenges for our research community – it is necessary for us to build expertise in handling large datasets, image processing, and tomographic reconstruction. We will present the status of CT using laser-driven sources with a view to discussion of how we can engage with the imaging community and what new opportunities may arise for the CCPi network.

dimensional-XCT conference update from Huddersfield, Paul Bills

A Hartree Perspective: Working with STFC Opportunities - Tim Kirkham (12:45pm)

The Bridging for Innovators https://www.stfc.ac.uk/b4i programme runs across all STFC facilities and gives business the opportunity to work with STFC facilities and Scientists on up to a full funded basis. There is an opportunity to strengthen links between STFC and Universities by businesses linked to Universities working on this programme to combine expertise. Such an opportunity exists potentially at centres such as the Royce, and this talk will give an over view of this opportunity and welcome ideas to stimulate collaboration.

Introduction new staff and description of ICT'2019, Gemma Fardell

...presenting her experiences to data including work at Nikon Metrolgy and plans for the future - also review of iCT ...'very application heavy this year. Every other year it is based in Wels, and ... little more research orientated. The industry talks only take up one morning, and there was a lot of input from research groups around Europe. This year ~350 attendees, so the conference is probably the largest XCT one in Europe - there were a couple of posters on multi-spectral CT, and reconstruction is always a popular topic."

 

SCD (STFC) based Seminars:

Revision 18912 Apr 2019 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 40 to 40
  Schedule:
Changed:
<
<
  • 9 July 2019 - TBA
>
>
  • 9 July 2019 - Mike White / Bill Lionheart presentation on the Helgason-Ludwig consistency conditions,
 
  • Monday 10 June 2019 moved to be next to Fringe event, as major RAL Event on Tuesday 11 June 2019.
  • 14 May 2019 - TBA
  • 9 April 2019 - Visitors from CCPi reconstruction code development teams - Flagship and Core (att 29)

Revision 18809 Apr 2019 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 43 to 43
 
  • 9 July 2019 - TBA
  • Monday 10 June 2019 moved to be next to Fringe event, as major RAL Event on Tuesday 11 June 2019.
  • 14 May 2019 - TBA
Changed:
<
<
  • 9 April 2019 - Visitors from CCPi reconstruction code development teams - Flagship and Core
  • 12 March 2019 Paul Bills - Huddersfield - d-XCT conference; Dan Symes CLF speaker on new Xray Sources; Tom Kirkham STFC connections; and Gemma Fardell, ICT conference; .... all before
  • ... Exec Meeting of CCPi held from 1pm
>
>
  • 9 April 2019 - Visitors from CCPi reconstruction code development teams - Flagship and Core (att 29)
  • 12 March 2019 Paul Bills - Huddersfield - d-XCT conference; Dan Symes CLF speaker on new Xray Sources; Tom Kirkham STFC connections; and Gemma Fardell, ICT conference; (att ~25) .... all before
  • ... Exec Meeting of CCPi held from 1pm (att 9)
 
  • 12 February 2019 Session on coatings (thermal, barrier, oxidation and corrosion resistant) Beatriz Mingo "Active Functionalization of ceramic coatings: incorporation of loaded nanotubes" and Nicolas Laugel, "Electrolytic plasma processes for metal surface modification"
  • 15 January 2019 Sarah Fisher - Progress in Laminography and Martin Turner New fast XCT facilities and Applications to the EPSRC Roadmap (att 20)
  • 11 December 2018 Experience from Jake Minns "Neural Networks in Tomography. From basic concepts to experiments on segmentation. A summer student project report" and Nghai Vo "Tomographic data for testing, demonstrating, and developing methods of removing ring artifacts" and "Python implementation of distortion correction methods for X-ray tomography" - https://zenodo.org/communities/ccpi (att 11+2+1)

Revision 18705 Apr 2019 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Changed:
<
<
Seminars and vis sessions (http://tinyurl.com/STFCVisSem) across the sites.
>
>
Seminars and vis sessions (http://tinyurl.com/STFCVisSem) across the sites:
 
Changed:
<
<
  • Tomo-and-Coffee Session: 3D Volume Data Visualisation: Software show-and-tell. Atlas Building - Atlas Visualisation Facility. Scheduled in the Atlas Building at the Harwell campus during sometimes the last Friday of each month from 2pm we have open sessions. Consisting of a short talks/show-and-tells along with opportunity to discuss visualisation needs with your data.
  • Lunch and Learn sessions at the University of Manchester MXIF at 12noon with pizza
  • Specialist seminars at locaions including mathematics departments etc...
>
>
  • Tomo-and-Coffee Session: 3D Volume Data Visualisation: Software show-and-tell. Atlas Building - Atlas Visualisation Facility. Scheduled in the Atlas Building at the Harwell campus during sometimes the last Friday of each month from 2pm we have open sessions. Consisting of a short talks/show-and-tells along with opportunity to discuss visualisation needs with your data.
  • Lunch and Learn sessions at the University of Manchester MXIF at 12noon with pizza
  • Specialist seminars at locaions including mathematics departments etc...
  Next Seminar:

12 March 2019 Lunch-and-Learn 12noon in Manchester, RAL and video-conf

Changed:
<
<
Please register here: https://forms.office.com/Pages/ResponsePage.aspx?id=HDZmP36oWEGPYZnoLbPKyIoNg6mJSW5Jp6v4v7D_cv9UNFZIOEtCOVdLU0k4T0pCQjBVWTE0MVpCRy4u
>
>
Please register here: https://forms.office.com/Pages/ResponsePage.aspx?id=HDZmP36oWEGPYZnoLbPKyIoNg6mJSW5Jp6v4v7D_cv9UNFZIOEtCOVdLU0k4T0pCQjBVWTE0MVpCRy4u
  Dan Symes and Ceri Brenner:
Changed:
<
<
>
>
 
Changed:
<
<
"Tomographic imaging using intense laser-driven radiation sources": High power lasers (> 100 TW) can be used as the driver for compact light sources that deliver extreme brightness ultrashort x-ray pulses ideally suited for advanced imaging applications. The laser is used to create a cm-scale plasma accelerator generating femtosecond relativistic electron bunches with GeV? energy that can be converted to x-ray beams through a plasma betatron process or bremsstrahlung radiation. This produces up to 1010 photons per pulse in the x-ray region spanning 10 keV up to multi-MeV. The beam is spatially coherent because of the micron-scale source size, enabling phase enhanced imaging to improve contrast between low Z materials with similar density. Using the Gemini laser at RAL we have demonstrated high resolution micro-CT of biological samples and NDE of industrial components. The same laser can generate x-ray energies in the 10’s keV range for soft tissue, low density polymer and composite materials and in the multi-MeV range for penetration of large dense samples such as automotive or aerospace components. Commercialisation of high power laser technology has led to robust, well-characterised systems that are relatively compact and affordable. In the next few years, we expect to develop laser-plasma accelerators as dedicated x-ray machines, capable of micron resolution tomography with high frame rate. This shift from conducting proof-of-principle experiments to operating a synchrotron-style beam brings challenges for our research community – it is necessary for us to build expertise in handling large datasets, image processing, and tomographic reconstruction. We will present the status of CT using laser-driven sources with a view to discussion of how we can engage with the imaging community and what new opportunities may arise for the CCPi network.
>
>
"Tomographic imaging using intense laser-driven radiation sources": High power lasers (> 100 TW) can be used as the driver for compact light sources that deliver extreme brightness ultrashort x-ray pulses ideally suited for advanced imaging applications. The laser is used to create a cm-scale plasma accelerator generating femtosecond relativistic electron bunches with GeV? energy that can be converted to x-ray beams through a plasma betatron process or bremsstrahlung radiation. This produces up to 1010 photons per pulse in the x-ray region spanning 10 keV up to multi-MeV. The beam is spatially coherent because of the micron-scale source size, enabling phase enhanced imaging to improve contrast between low Z materials with similar density. Using the Gemini laser at RAL we have demonstrated high resolution micro-CT of biological samples and NDE of industrial components. The same laser can generate x-ray energies in the 10’s keV range for soft tissue, low density polymer and composite materials and in the multi-MeV range for penetration of large dense samples such as automotive or aerospace components. Commercialisation of high power laser technology has led to robust, well-characterised systems that are relatively compact and affordable. In the next few years, we expect to develop laser-plasma accelerators as dedicated x-ray machines, capable of micron resolution tomography with high frame rate. This shift from conducting proof-of-principle experiments to operating a synchrotron-style beam brings challenges for our research community – it is necessary for us to build expertise in handling large datasets, image processing, and tomographic reconstruction. We will present the status of CT using laser-driven sources with a view to discussion of how we can engage with the imaging community and what new opportunities may arise for the CCPi network.
 

dimensional-XCT conference update from Huddersfield, Paul Bills

A Hartree Perspective: Working with STFC Opportunities - Tim Kirkham (12:45pm)

Changed:
<
<
>
>
  The Bridging for Innovators https://www.stfc.ac.uk/b4i programme runs across all STFC facilities and gives business the opportunity to work with STFC facilities and Scientists on up to a full funded basis. There is an opportunity to strengthen links between STFC and Universities by businesses linked to Universities working on this programme to combine expertise. Such an opportunity exists potentially at centres such as the Royce, and this talk will give an over view of this opportunity and welcome ideas to stimulate collaboration.

Introduction new staff and description of ICT'2019, Gemma Fardell

Changed:
<
<
>
>
  ...presenting her experiences to data including work at Nikon Metrolgy and plans for the future - also review of iCT ...'very application heavy this year. Every other year it is based in Wels, and ... little more research orientated. The industry talks only take up one morning, and there was a lot of input from research groups around Europe. This year ~350 attendees, so the conference is probably the largest XCT one in Europe - there were a couple of posters on multi-spectral CT, and reconstruction is always a popular topic."
Line: 40 to 40
  Schedule:
Changed:
<
<
  • 9 July 2019 - TBA
  • Monday 10 June 2019 moved to be next to Fringe event, as major RAL Event on Tuesday 11 June 2019.
  • 14 May 2019 - TBA
  • 9 April 2019 - Visitors from CCPi reconstruction code development teams - Flagship and Core
  • 12 March 2019 Paul Bills - Huddersfield - d-XCT conference; Dan Symes CLF speaker on new Xray Sources; Tom Kirkham STFC connections; and Gemma Fardell, ICT conference; .... all before
  • ... Exec Meeting of CCPi held from 1pm
  • 12 February 2019 Session on coatings (thermal, barrier, oxidation and corrosion resistant) Beatriz Mingo "Active Functionalization of ceramic coatings: incorporation of loaded nanotubes" and Nicolas Laugel, "Electrolytic plasma processes for metal surface modification"
  • 15 January 2019 Sarah Fisher - Progress in Laminography and Martin Turner New fast XCT facilities and Applications to the EPSRC Roadmap (att 20)
  • 11 December 2018 Experience from Jake Minns "Neural Networks in Tomography. From basic concepts to experiments on segmentation. A summer student project report" and Nghai Vo "Tomographic data for testing, demonstrating, and developing methods of removing ring artifacts" and "Python implementation of distortion correction methods for X-ray tomography" - https://zenodo.org/communities/ccpi (att 11+2+1)
>
>
  • 9 July 2019 - TBA
  • Monday 10 June 2019 moved to be next to Fringe event, as major RAL Event on Tuesday 11 June 2019.
  • 14 May 2019 - TBA
  • 9 April 2019 - Visitors from CCPi reconstruction code development teams - Flagship and Core
  • 12 March 2019 Paul Bills - Huddersfield - d-XCT conference; Dan Symes CLF speaker on new Xray Sources; Tom Kirkham STFC connections; and Gemma Fardell, ICT conference; .... all before
  • ... Exec Meeting of CCPi held from 1pm
  • 12 February 2019 Session on coatings (thermal, barrier, oxidation and corrosion resistant) Beatriz Mingo "Active Functionalization of ceramic coatings: incorporation of loaded nanotubes" and Nicolas Laugel, "Electrolytic plasma processes for metal surface modification"
  • 15 January 2019 Sarah Fisher - Progress in Laminography and Martin Turner New fast XCT facilities and Applications to the EPSRC Roadmap (att 20)
  • 11 December 2018 Experience from Jake Minns "Neural Networks in Tomography. From basic concepts to experiments on segmentation. A summer student project report" and Nghai Vo "Tomographic data for testing, demonstrating, and developing methods of removing ring artifacts" and "Python implementation of distortion correction methods for X-ray tomography" - https://zenodo.org/communities/ccpi (att 11+2+1)
 
  • "extra" informal session: 2:30pm Wednesday 5 December 2018 Julia Brettschneider and Wilfrid Kendall (Warwick University) "Investigating industrial CT scanner damage project with ATI" host Tristan Lowe (att 5)
Changed:
<
<
  • 13 November 2018 !ToScA (and other events); Chakri Gudla "Multiscale correlative characterization of environmentally assisted crack initiation, propagation and failure in a high strength aa5083 h131 alloy" and Sam Johnston "Non destructive 3D grain imaging in aeroengine materials by diffraction contrast tomography" (att 23)
  • 2 October 2018 Brian Bay "DVC" and Daniil Kazantzev "Tomophantom package" - at RAL v-conf to Manchester (att 28+6)
  • 10 July 2018 ICAL Russell Garwood ; and new (scalable) reconstruction package from the MTC Nick Brierley (att 22)
>
>
  • 13 November 2018 !ToScA (and other events); Chakri Gudla "Multiscale correlative characterization of environmentally assisted crack initiation, propagation and failure in a high strength aa5083 h131 alloy" and Sam Johnston "Non destructive 3D grain imaging in aeroengine materials by diffraction contrast tomography" (att 23)
  • 2 October 2018 Brian Bay "DVC" and Daniil Kazantzev "Tomophantom package" - at RAL v-conf to Manchester (att 28+6)
  • 10 July 2018 ICAL Russell Garwood ; and new (scalable) reconstruction package from the MTC Nick Brierley (att 22)
 
  • 12 June 2018 Jakob Jorgensen and Parmesh Gajjar "Advancing automated temporal-CT capabilities of laboratory μXCT machines" (att 11)
  • 8 May 2018 Wenjuan Sun and Stephen Brown NPL; Title: Recent development in dimensional X-ray computed tomography at NPL for advanced manufacturing (att 19)
  • 10 April 2018 - Genoveva Burca, Instrument Scientist - IMAT, ISIS Facility "IMAT- neutron imaging and diffraction instrument for materials science at the ISIS neutron spallation source" (att 21)
  • 13 March 2018 - Catherine Disney Microstructure and Mechanics of Intervertebral Discs from Phase Contrast Synchrotron X-ray Tomography (att 20)
Changed:
<
<
  • 13 February 2018 - Yi Guo “Characterizing voids during ductile fracture of a dual phase steel using X-ray computed tomography and serial sectioning EBSD” and Shelley Rawson “Bio and bio-inspired materials” (att 27)
>
>
  • 13 February 2018 - Yi Guo “Characterizing voids during ductile fracture of a dual phase steel using X-ray computed tomography and serial sectioning EBSD” and Shelley Rawson “Bio and bio-inspired materials” (att 27)
 
  • 16 January 2018 - Adam Cooper X-ray tomographic analysis and characterization of ductile damage, William Brayshaw Ductile fracture behaviour of Reactor Pressure Vessel steels (att 20)
  • 13 December 2017 - CIL CCPi Sri Nagella (att 19)
  • 7 November 2017 - Nick Curry An Investigation into Rust Layer Microstructure (att 30)
  • 13 September 2017 - Alistair Garner Advanced 3D characterisation of iodine-induced stress corrosion cracks in zirconium alloys Jose Godhino BP summer placements (att 22)
Changed:
<
<
  • 9 August 2017 - Nghai Vo "Developments of image processing techniques for tomographic data at synchrotron facilities" from Diamond Light Source; Martin Turner on dXCT activities (att 22)
>
>
  • 9 August 2017 - Nghai Vo "Developments of image processing techniques for tomographic data at synchrotron facilities" from Diamond Light Source; Martin Turner on dXCT activities (att 22)
 
  • 19 October 2016 - review at Manchester on ToScA
  • 18 May 2016 - inc a follow on Training Session with Parmesh Gajjar on hacking the Nikon imaging devices (initially the custom bay units).
Changed:
<
<
  • 16 March 2016 - Michael McCarthy (NPL), University of Manchester HMXIF, "Industrial XCT: Current develops of a dimensional verification standard for XCT (ISO 10360)”
>
>
  • 16 March 2016 - Michael McCarthy (NPL), University of Manchester HMXIF, "Industrial XCT: Current develops of a dimensional verification standard for XCT (ISO 10360)”
 
  • 1 May 2015 - Bill Lionheart will talk about Fast Tomography: From Airport Baggage Scanning to Materials Science.
Changed:
<
<
  • 27 February 2015 - Martin Turner “Visualisation Matters - the need to put the human back in the imaging-capture-and-computational loop: case studies from work with the CCPi (http://www.ccpi.ac.uk/) and Harwell Imaging Partnership as well as future opportunities for collaboration and resource"
>
>
  • 27 February 2015 - Martin Turner “Visualisation Matters - the need to put the human back in the imaging-capture-and-computational loop: case studies from work with the CCPi (http://www.ccpi.ac.uk/) and Harwell Imaging Partnership as well as future opportunities for collaboration and resource"
  Proposals:
Changed:
<
<
  • new CCPi Flagship results
>
>
  • new CCPi Flagship results
 
  • PhD project pre-results
  • ENGINX J Kelleher
  • Jason Wong (plastic surgeon - major trauma) Imaging needs described
Changed:
<
<
  • Invite Phil Childs - to !UoM - stories of measurement standards.
>
>
  • Invite Phil Childs - to !UoM - stories of measurement standards.
 
  • ...
Extra Specialist Seminars:
Line: 124 to 124
 
  • Pre-processing Imaging techniques (Nghia Vo)
  • Thomas Blumensath, Southampton University
Changed:
<
<
  • Paul Quinn – DLS I14 new techniques and Updates
>
>
  • Paul Quinn – DLS I14 new techniques and Updates
 
Line: 150 to 150
  Video Streamed to PSI Seminar Room (3.306, Alan Turing building) at University of Manchester - local host martin.turner@manchester.ac.uk
Changed:
<
<
tn_tncJan-17b.jpg Abstract; "SuRVoS brings together machine learning models, computer vision techniques and human knowledge within a user interface to interactively segment large 3D volumes. The user interface of SuRVoS is divided in two panels. One panel contains all the available plugins (or tools) and the other panel, instead, resides the visualisation panel (where everything made with SuRVoS will be visualised) and another two main workflows. SuRVoS is able to work with very large datasets by means of its Region Of Interest (ROI) system and a HDF5 workspace. Everything loaded with SuRVoS and every action made within it will be saved in a workspace folder inside an HDF5 file. HDF5 is an on-disk data format that loads only the required data on memory. By using ROIs, SuRVoS limits all its actions to the selected ROI, which allows the user to load large datasets but operate only in small windows, also improving the performance of all the subsequent actions."It has been developed jointly between the University of Nottingham, UK and Diamond Light Source, UK and is open source: https://diamondlightsource.github.io/SuRVoS/ imanol.luengo@nottingham.ac.uk
>
>
tn_tncJan-17b.jpg Abstract; "SuRVoS brings together machine learning models, computer vision techniques and human knowledge within a user interface to interactively segment large 3D volumes. The user interface of SuRVoS is divided in two panels. One panel contains all the available plugins (or tools) and the other panel, instead, resides the visualisation panel (where everything made with SuRVoS will be visualised) and another two main workflows. SuRVoS is able to work with very large datasets by means of its Region Of Interest (ROI) system and a HDF5 workspace. Everything loaded with SuRVoS and every action made within it will be saved in a workspace folder inside an HDF5 file. HDF5 is an on-disk data format that loads only the required data on memory. By using ROIs, SuRVoS limits all its actions to the selected ROI, which allows the user to load large datasets but operate only in small windows, also improving the performance of all the subsequent actions."It has been developed jointly between the University of Nottingham, UK and Diamond Light Source, UK and is open source: https://diamondlightsource.github.io/SuRVoS/ imanol.luengo@nottingham.ac.uk
 
Line: 164 to 164
  Abstract: Imaging techniques play an important role in several research fields: medicine, biology, material science, geosciences and archaeology. Optical and scanning electron microscopy techniques are widely adopted tools for the investigation of the texture and morphology in a large range of materials. Imaging techniques based on hard X-ray are also of particular interest and microradiography has proved to be useful for clinical diagnostics and for the investigation of crystal growth.
Changed:
<
<
In recent years great interest has been posed on X-ray computed microtomography (microCT) techniques, employing microfocus and synchrotron radiation sources. These techniques produce three-dimensional (3D) or 4D (dynamic microCT) images of the internal structure of objects with a spatial resolution at the micron- and submicron- scale. Investigations performed directly in the 3D domain overcome the limitations of stereological methods usually applied to microscopy-based analyses and a non-destructive approach is more suitable for further complementary analyses and for precious or unique samples (fossils and archeological finds, in-vivo and in-situ imaging, etc …).
>
>
In recent years great interest has been posed on X-ray computed microtomography (microCT) techniques, employing microfocus and synchrotron radiation sources. These techniques produce three-dimensional (3D) or 4D (dynamic microCT) images of the internal structure of objects with a spatial resolution at the micron- and submicron- scale. Investigations performed directly in the 3D domain overcome the limitations of stereological methods usually applied to microscopy-based analyses and a non-destructive approach is more suitable for further complementary analyses and for precious or unique samples (fossils and archeological finds, in-vivo and in-situ imaging, etc …).
  An intriguing challenge is to extract directly from 3D and 4D images quantitative parameters related to the physical properties of the studied materials. Porosity and specific surface area as well as anisotropy, connectivity and tortuosity are interesting descriptors of a 3D model. However, accurate image processing and analysis methods for an effective assessment of these parameters are still an open issue in several applications.
Line: 174 to 174
  4:00pm-5:00pm: Friday 12 September 2016 - Novitom http://www.novitom.com/en/ RAL AVF (Atlas Visualisation Facility) and VC (Cisco Jabber) to Whitworth Room in DL - local host Sri Nagella.
Changed:
<
<
tn_tncSep-16b.jpg Novitom is an independent company, specialized in microanalysis, 3D materials characterization and non-destructive testing, based on advanced imaging techniques including synchrotron-powered technology. Novitom also develops customized algorithms for automated analysis of your 2D or 3D images. On demand, Novitom also designs mechanical press or thermal cells compatible with your laboratory imaging equipment. AVF (RAL) and video-link to the University of Manchester. http://www.novitom.com/en/
>
>
tn_tncSep-16b.jpg Novitom is an independent company, specialized in microanalysis, 3D materials characterization and non-destructive testing, based on advanced imaging techniques including synchrotron-powered technology. Novitom also develops customized algorithms for automated analysis of your 2D or 3D images. On demand, Novitom also designs mechanical press or thermal cells compatible with your laboratory imaging equipment. AVF (RAL) and video-link to the University of Manchester. http://www.novitom.com/en/
 

Twelve Tomography Seminars for the Season 2015-2016 all in one picture:

Changed:
<
<
semseason2015_2016.jpg
>
>
semseason2015_2016.jpg
 

2:00pm-3:00pm 8 September and 3pm-4pm 12 September 2016 - From ToScA abstract: Marcus D. Hanwell, S. Waldon, Y. Jiang, C. Quammen, E. Padgett, DA. Muller, R. Hovden - Tomviz: Open Source, Scalable Platform for Reproducible Materials Tomography - local host Sri Nagella.

Changed:
<
<
tn_tncSep-16.jpg Materials tomography using transmission electron microscopy (TEM) involves a number of steps to go from projection images taken on the microscope to an aligned, reconstructed 3D volume. The Tomviz project builds upon a number of open source frameworks to deliver a powerful desktop application for research, leveraging the Python environment along with a number of scientific Python modules to deliver a comprehensive solution for materials tomography at nanoscale to atomic resolution. The development of the application will be discussed, along with the Pythonbased data processing pipeline, and the XML format used to enable complex, reproducible data processing and visualization pipelines. The application is based on Qt, VTK, ParaView, and ITK with a bundled Python distribution making use of NumPy, SciPy, and Python wrapped ITK/ParaView to offer a powerful visualization and data analysis application. The development, packaging, and deployment of a robust, crossplatform application for materials tomography will be discussed. The current state of reproducible analysis and data processing pipelines demonstrated, and future directions will be discussed. The use of Python will be demonstrated within this context. Reproducibility is a key problem in science, and complex data collection, alignment, reconstruction, and processing pipeline are particularly important. This project is funded by the DOE SBIR program, and is an active collaboration between developers at Kitware and scientists at Cornell University. AVF (RAL) and then at University of Manchester.
>
>
tn_tncSep-16.jpg Materials tomography using transmission electron microscopy (TEM) involves a number of steps to go from projection images taken on the microscope to an aligned, reconstructed 3D volume. The Tomviz project builds upon a number of open source frameworks to deliver a powerful desktop application for research, leveraging the Python environment along with a number of scientific Python modules to deliver a comprehensive solution for materials tomography at nanoscale to atomic resolution. The development of the application will be discussed, along with the Pythonbased data processing pipeline, and the XML format used to enable complex, reproducible data processing and visualization pipelines. The application is based on Qt, VTK, ParaView, and ITK with a bundled Python distribution making use of NumPy, SciPy, and Python wrapped ITK/ParaView to offer a powerful visualization and data analysis application. The development, packaging, and deployment of a robust, crossplatform application for materials tomography will be discussed. The current state of reproducible analysis and data processing pipelines demonstrated, and future directions will be discussed. The use of Python will be demonstrated within this context. Reproducibility is a key problem in science, and complex data collection, alignment, reconstruction, and processing pipeline are particularly important. This project is funded by the DOE SBIR program, and is an active collaboration between developers at Kitware and scientists at Cornell University. AVF (RAL) and then at University of Manchester.
 

2:00pm-3:00pm: Friday 12 August 2016 - Ander Biguri and Manuch Soleimani, University of Bath https://github.com/CERN/TIGRE RAL AVF (Atlas Visualisation Facility) and VC (Cisco Jabber) to Whitworth Room in DL - local host Sri Nagella.

Changed:
<
<
tn_tncAug-16.jpg Ander Biguri and Manuch Soleimani, University of Bath Tomographic Iterative GPU-based Reconstruction (TIGRE) Toolbox is a MATLAB/CUDA toolbox for fast and accurate 3D X-ray image reconstruction. One of the key features is the implementation of a wide variety of iterative algorithms as well as FDK, including a range of algorithms in the SART family, the Krylov subspace family, statistical inversion and a range of methods using total variation regularization. Additionally, the toolbox has GPU-accelerated projection and back projection using the latest techniques and it has a modular design that facilitates the implementation of new algorithms. The TIGRE Toolbox is released under an open source license, encouraging people to contribute. AVF (RAL) and video-link to Whitworth, Daresbury Labs.
>
>
tn_tncAug-16.jpg Ander Biguri and Manuch Soleimani, University of Bath Tomographic Iterative GPU-based Reconstruction (TIGRE) Toolbox is a MATLAB/CUDA toolbox for fast and accurate 3D X-ray image reconstruction. One of the key features is the implementation of a wide variety of iterative algorithms as well as FDK, including a range of algorithms in the SART family, the Krylov subspace family, statistical inversion and a range of methods using total variation regularization. Additionally, the toolbox has GPU-accelerated projection and back projection using the latest techniques and it has a modular design that facilitates the implementation of new algorithms. The TIGRE Toolbox is released under an open source license, encouraging people to contribute. AVF (RAL) and video-link to Whitworth, Daresbury Labs.
 Eventbrite link: https://www.eventbrite.co.uk/e/ccpi-software-show-and-tell-tickets-26623599904


2:00pm-3:30pm: Friday 11 August 2016 CCPi Interactive Vis - Show-and-Tell http://tyne.dl.ac.uk/twiki/bin/view/Visualisation/ProjectsTouchTable RAL AVF (Atlas Visualisation Facility), and VC (Cisco Jabber) to Whitworth Room in DL - local host Sri Nagella.

Changed:
<
<
tn_tncAug-16p.jpg A meet and discuss for future funds/ fellowships and importantly how to use the Atlas Visualisation Facility at RAL for further Public Engagement activities. The emphasis is on XCT data sets, but other items will be discussed. Items: 1. New version of Drishti/Prayog software - for stereo wall setup; 2. Ideas on how to make sure demos are usable; 3. Discuss the University of Manchester Kiosks; 4. Consider STFC PE grants to create new demos and exhibitions Information at; http://tyne.dl.ac.uk/twiki/bin/view/Visualisation/ProjectsTouchTable AVF (RAL) and video-link to Whitworth, Daresbury Labs.
>
>
tn_tncAug-16p.jpg A meet and discuss for future funds/ fellowships and importantly how to use the Atlas Visualisation Facility at RAL for further Public Engagement activities. The emphasis is on XCT data sets, but other items will be discussed. Items: 1. New version of Drishti/Prayog software - for stereo wall setup; 2. Ideas on how to make sure demos are usable; 3. Discuss the University of Manchester Kiosks; 4. Consider STFC PE grants to create new demos and exhibitions Information at; http://tyne.dl.ac.uk/twiki/bin/view/Visualisation/ProjectsTouchTable AVF (RAL) and video-link to Whitworth, Daresbury Labs.
 Eventbrite link: https://www.eventbrite.co.uk/e/ccpi-interactive-vis-show-and-tell-tickets-26624124473


Line: 210 to 208
 
Changed:
<
<
6 July 2016, 2:00pm-3:00pm at RAL AND 11 July 2016 at DL SCD Seminar: Dave Pugmire (Oak Ridge National Laboratory), "Visualization and Analysis Services for Extreme Scale Supercomputers" The scientific data that are being generated today, and in the near future, will quickly outpace our ability to process and understand it. The data generated are growing in multiple ways, including the size of the data, the rate at which it arrives, and the varying types of data. Additionally, data are available from multiple sources, including for example, computational simulations and sensor data extracted from experiments. In such situations, workflows for the movement and management of data, as well as the analysis and visualization while the data are in transit, become even more critical, and increasingly challenging. At the same time, revolutionary changes are emerging in the architectures of supercomputers. These changes include tremendous increases in concurrency on each node, as well as a deep hierarchy of memory. These architectures are a challenge for currently running HPC codes, as well as visualization and analysis algorithms. We are, along with collaborators at other national laboratories, and universities, researching and developing a cohesive framework that will enable scientists to manage the growing data problem, and to enable them to extract knowledge and insight. Central to this work is a “Service Oriented Architectures” (SOA) framework that provides a clear separation from the data producers and consumers. Our framework is based on the ADIOS middleware layer, that manages the data as they are produced, and orchestrates movement through the deep memory hierarchy. The data consumers, in this case visualization and analysis services built from tools like VisIt, ParaView, VTK-m, and pbdR, will interact with the middleware layer for access to data, and for coordination to optimize access across the deep memory hierarchy. These services, which will be self-consistent, interoperable operations will enable scientists to construct multiple complex workflows. This talk will present the preliminary research on the development of this framework and the associated services as well as the initial results obtained working with several large-scale simulation codes running on the Titan supercomputer at ORNL. And finally, a detailed discussion on the future research plans and directions that will enable scientific insight on exascale computing systems.
>
>
6 July 2016, 2:00pm-3:00pm at RAL AND 11 July 2016 at DL SCD Seminar: Dave Pugmire (Oak Ridge National Laboratory), "Visualization and Analysis Services for Extreme Scale Supercomputers" The scientific data that are being generated today, and in the near future, will quickly outpace our ability to process and understand it. The data generated are growing in multiple ways, including the size of the data, the rate at which it arrives, and the varying types of data. Additionally, data are available from multiple sources, including for example, computational simulations and sensor data extracted from experiments. In such situations, workflows for the movement and management of data, as well as the analysis and visualization while the data are in transit, become even more critical, and increasingly challenging. At the same time, revolutionary changes are emerging in the architectures of supercomputers. These changes include tremendous increases in concurrency on each node, as well as a deep hierarchy of memory. These architectures are a challenge for currently running HPC codes, as well as visualization and analysis algorithms. We are, along with collaborators at other national laboratories, and universities, researching and developing a cohesive framework that will enable scientists to manage the growing data problem, and to enable them to extract knowledge and insight. Central to this work is a “Service Oriented Architectures” (SOA) framework that provides a clear separation from the data producers and consumers. Our framework is based on the ADIOS middleware layer, that manages the data as they are produced, and orchestrates movement through the deep memory hierarchy. The data consumers, in this case visualization and analysis services built from tools like VisIt, ParaView, VTK-m, and pbdR, will interact with the middleware layer for access to data, and for coordination to optimize access across the deep memory hierarchy. These services, which will be self-consistent, interoperable operations will enable scientists to construct multiple complex workflows. This talk will present the preliminary research on the development of this framework and the associated services as well as the initial results obtained working with several large-scale simulation codes running on the Titan supercomputer at ORNL. And finally, a detailed discussion on the future research plans and directions that will enable scientific insight on exascale computing systems.
 
Changed:
<
<
Workshop @RAL on Advances in X-ray Imaging: Expanding the Frontiers of Knowledge 10 June 2016 Over the past decade, X-ray tomography has made significant progress with respect to spatial, temporal resolution and imaging modality. Presentations will illustrate current achievements and future developments in techniques such as computed laminography, refraction tomography, in-line phase contrast tomography and X-ray colour imaging. - Thilo Morgenmeyer “Synchrotron laminography applied to mechanics of materials”, Mines ParisTech, France; Fabien Leonard “Synchrotron Refraction Tomography”, BAM Berlin; Simon Jacques “Recent advances in X-ray based chemical imaging”, UoM/UK Catalysis Hub; Nikolay Osipov & Stephane Quilici, Mines ParisTech, France: Zset: non-linear material & structure analysis ; Peter Lee “4D imaging of dynamic processes”; Michel Bornert “In situ testing and XR-µCT imaging for the investigation of deformation and damage mechanisms in civil engineering materials.” Ecole des Ponts ParisTech, France; Gianluca Tozzi “Application of Digital Volume Correlation for the experimental investigation of bone tissue and biomaterials”, University of Portsmouth
>
>
Workshop @RAL on Advances in X-ray Imaging: Expanding the Frontiers of Knowledge 10 June 2016 Over the past decade, X-ray tomography has made significant progress with respect to spatial, temporal resolution and imaging modality. Presentations will illustrate current achievements and future developments in techniques such as computed laminography, refraction tomography, in-line phase contrast tomography and X-ray colour imaging. - Thilo Morgenmeyer “Synchrotron laminography applied to mechanics of materials”, Mines ParisTech, France; Fabien Leonard “Synchrotron Refraction Tomography”, BAM Berlin; Simon Jacques “Recent advances in X-ray based chemical imaging”, UoM/UK Catalysis Hub; Nikolay Osipov & Stephane Quilici, Mines ParisTech, France: Zset: non-linear material & structure analysis ; Peter Lee “4D imaging of dynamic processes”; Michel Bornert “In situ testing and XR-µCT imaging for the investigation of deformation and damage mechanisms in civil engineering materials.” Ecole des Ponts ParisTech, France; Gianluca Tozzi “Application of Digital Volume Correlation for the experimental investigation of bone tissue and biomaterials”, University of Portsmouth
  Fringe Meeting - 9 June 2016 Collaborative Future X-Ray Roundtable


Changed:
<
<
16 March 2016, Lunch Seminar, Michael McCarthy (NPL), held at University of Manchester HMXIF, "Industrial XCT: Current develops of a dimensional verification standard for XCT (ISO 10360)”
>
>
16 March 2016, Lunch Seminar, Michael McCarthy (NPL), held at University of Manchester HMXIF, "Industrial XCT: Current develops of a dimensional verification standard for XCT (ISO 10360)”
 

2:00pm-3:00pm: Wednesday 13 January 2016 - Jakob Sauer Jřrgensen, Technical University of Denmark "How few projections are enough? Predicting performance of sparsity regularization in X-ray tomography" S44 at R89 (RAL) and video-link to Arkwright, Daresbury Labs Local hosts Daniil Kazantsev sand Sri Nagella.

Changed:
<
<
tn_tncJan-16.jpg Jakob Sauer Jřrgensen, Technical University of Denmark How few projections are enough? Predicting performance of sparsity regularization in X-ray tomography Sparsity regularization in X-ray tomography has shown large promise for accurate reconstruction from reduced data, potentially leading to substantially reduced patient X-ray exposure in medical imaging and shorter scan times in materials science. Compressed sensing (CS) has motivated these developments by offering guarantees of accurate reconstruction of sparse images from reduced data under suitable assumptions on the sampling matrix. However, existing CS guarantees, e.g., based on the restricted isometry property (RIP), do not apply to structured and sparse sampling matrices in X-ray tomography. The empirical success of sparsity regulaization in X-ray tomography therefore remains theoretically unexplained. In this seminar I will describe our attempts of establishing a connection between image sparsity and the amount of undersampling admitted by sparsity-regularized reconstruction methods. In particular, I will describe simulation results suggesting how one may predict the sufficient number of projections to acquire based on the sparsity level of the scanned object. I will then describe preliminary results of validation with real data using the SophiaBeads data set recently released from the University of Manchester. S44 at R89 (RAL) and video-link to Arkwright, Daresbury Labs.
>
>
tn_tncJan-16.jpg Jakob Sauer Jřrgensen, Technical University of Denmark How few projections are enough? Predicting performance of sparsity regularization in X-ray tomography Sparsity regularization in X-ray tomography has shown large promise for accurate reconstruction from reduced data, potentially leading to substantially reduced patient X-ray exposure in medical imaging and shorter scan times in materials science. Compressed sensing (CS) has motivated these developments by offering guarantees of accurate reconstruction of sparse images from reduced data under suitable assumptions on the sampling matrix. However, existing CS guarantees, e.g., based on the restricted isometry property (RIP), do not apply to structured and sparse sampling matrices in X-ray tomography. The empirical success of sparsity regulaization in X-ray tomography therefore remains theoretically unexplained. In this seminar I will describe our attempts of establishing a connection between image sparsity and the amount of undersampling admitted by sparsity-regularized reconstruction methods. In particular, I will describe simulation results suggesting how one may predict the sufficient number of projections to acquire based on the sparsity level of the scanned object. I will then describe preliminary results of validation with real data using the SophiaBeads data set recently released from the University of Manchester. S44 at R89 (RAL) and video-link to Arkwright, Daresbury Labs.
 


Changed:
<
<
3:00pm-4:30pm: Monday 14 December 2015 - "“Bring/Discuss-Your-Own-Data" and see Virtual Reality visualisation" RAL Atlas Visualisation Facility
>
>
3:00pm-4:30pm: Monday 14 December 2015 - "“Bring/Discuss-Your-Own-Data" and see Virtual Reality visualisation" RAL Atlas Visualisation Facility
 
Changed:
<
<
tn_tncDec-15.jpg “Bring/Discuss-Your-Own-Data" and see Virtual Reality visualisation at the RAL Atlas Visualisation Facility Also launch of the new CCPi website: www.ccpi.ac.uk/ With new license servers being negotiated we are looking again at the Avizo VR toolkit: https://twitter.com/CeriBrenner/status/591602828579332096 Opportunity to explore your data interactively in 3D. Contact srikanth.nagella@stfc.ac.uk to discuss data transfer prior to the event or just turn up to see and discuss.
>
>
tn_tncDec-15.jpg “Bring/Discuss-Your-Own-Data" and see Virtual Reality visualisation at the RAL Atlas Visualisation Facility Also launch of the new CCPi website: www.ccpi.ac.uk/ With new license servers being negotiated we are looking again at the Avizo VR toolkit: https://twitter.com/CeriBrenner/status/591602828579332096 Opportunity to explore your data interactively in 3D. Contact srikanth.nagella@stfc.ac.uk to discuss data transfer prior to the event or just turn up to see and discuss.
 
Changed:
<
<
10:30am-12noon: Friday 26 November 2015 - "Not yet becoming IronMan – but software for Touchable Scientific Visualisations" Martin Turner, Interactive Visualisation Group RAL Atlas Visualisation Facility
>
>
10:30am-12noon: Friday 26 November 2015 - "Not yet becoming IronMan – but software for Touchable Scientific Visualisations" Martin Turner, Interactive Visualisation Group RAL Atlas Visualisation Facility
 
Changed:
<
<
tn_tncNov-15.jpg Not yet becoming IronMan – but software for Touchable Scientific Visualisations Martin Turner, Interactive Visualisation Group RAL Atlas Visualisation Facility IVG (Interactive Visualisation Group), update meeting "…to create Touchable Pathways to Impact (and supported initially within the CCPi)" With high-end vis you can (almost) become Ironman (tweet from Laser’s experiment in RAL: https://twitter.com/CeriBrenner/status/591602828579332096) but this is not useful for mass engagement and we wished to go beyond videos with simple software solutions to add interactivity. This last year we have looked at open source code, we can use, which replaces commercial codes and allows for the development of touchtable devices but still has high-end graphics outputs. The GPU focussed Drishti-Prayog system has been chosen, modified and tested at a range of big events; and includes the first purpose built kiosk. This will be in the AVF – but we will attempt BlueJeans Video Conferencing – please email if wish to attend remotely (martin.turner@stfc.ac.uk)
>
>
tn_tncNov-15.jpg Not yet becoming IronMan – but software for Touchable Scientific Visualisations Martin Turner, Interactive Visualisation Group RAL Atlas Visualisation Facility IVG (Interactive Visualisation Group), update meeting "…to create Touchable Pathways to Impact (and supported initially within the CCPi)" With high-end vis you can (almost) become Ironman (tweet from Laser’s experiment in RAL: https://twitter.com/CeriBrenner/status/591602828579332096) but this is not useful for mass engagement and we wished to go beyond videos with simple software solutions to add interactivity. This last year we have looked at open source code, we can use, which replaces commercial codes and allows for the development of touchtable devices but still has high-end graphics outputs. The GPU focussed Drishti-Prayog system has been chosen, modified and tested at a range of big events; and includes the first purpose built kiosk. This will be in the AVF – but we will attempt BlueJeans Video Conferencing – please email if wish to attend remotely (martin.turner@stfc.ac.uk)
 

2pm-3pm: Friday 30 October 2015 - Antoniu Pop Programming and Optimizing Task Data-Flow Applications with OpenStream and Aftermath Local host for this event is Sri Nagella (srikanth.nagella@stfc.ac.uk)

Changed:
<
<
tn_tncOct-15.jpg Antoniu Pop Programming and Optimizing Task Data-Flow Applications with OpenStream and Aftermath Dynamic task-dependent parallelism is an increasingly popular programming model on shared-memory systems. Compared to data parallel loop-based concurrency, it promises enhanced scalability, load balancing and locality. These promises, however, are undermined by non-uniform memory access (NUMA). We show that it is possible to preserve the uniform hardware abstraction of contemporary task-parallel programming models, for both computing and memory resources, while achieving near-optimal data locality. Our run-time algorithms for NUMA-aware task and data placement are fully automatic, application-independent, performance-portable across NUMA machines, and adapt to dynamic changes. We take advantage of data-flow style task parallelism, where the privatization of task data enhances scalability through the elimination of false dependences, and enable fine-grained dynamic control over the placement of application data.In a second part, we present Aftermath, an interactive visualization tool for post-mortem trace analysis of cross-layer performance anomalies in dynamic task-parallel applications. We focus on the detection of anomalies inaccessible to state-of-the-art performance analysis techniques, including anomalies deriving from the interaction of multiple levels of software abstractions, anomalies associated with the hardware, and anomalies resulting from interferences between optimizations in the application and run-time system. Aftermath supports filtering, aggregation and joint visualization of key metrics and performance indicators, such as task duration, run-time state, hardware performance counters and data transfers. While not being specifically designed for NUMA architectures, Aftermath takes advantage of the explicit memory regions and dependence information in dependent task models to precisely capture long-distance and inter-core effects on complex, dynamic applications.
>
>
tn_tncOct-15.jpg Antoniu Pop Programming and Optimizing Task Data-Flow Applications with OpenStream and Aftermath Dynamic task-dependent parallelism is an increasingly popular programming model on shared-memory systems. Compared to data parallel loop-based concurrency, it promises enhanced scalability, load balancing and locality. These promises, however, are undermined by non-uniform memory access (NUMA). We show that it is possible to preserve the uniform hardware abstraction of contemporary task-parallel programming models, for both computing and memory resources, while achieving near-optimal data locality. Our run-time algorithms for NUMA-aware task and data placement are fully automatic, application-independent, performance-portable across NUMA machines, and adapt to dynamic changes. We take advantage of data-flow style task parallelism, where the privatization of task data enhances scalability through the elimination of false dependences, and enable fine-grained dynamic control over the placement of application data.In a second part, we present Aftermath, an interactive visualization tool for post-mortem trace analysis of cross-layer performance anomalies in dynamic task-parallel applications. We focus on the detection of anomalies inaccessible to state-of-the-art performance analysis techniques, including anomalies deriving from the interaction of multiple levels of software abstractions, anomalies associated with the hardware, and anomalies resulting from interferences between optimizations in the application and run-time system. Aftermath supports filtering, aggregation and joint visualization of key metrics and performance indicators, such as task duration, run-time state, hardware performance counters and data transfers. While not being specifically designed for NUMA architectures, Aftermath takes advantage of the explicit memory regions and dependence information in dependent task models to precisely capture long-distance and inter-core effects on complex, dynamic applications.
 

2pm-3pm: Friday 19 October 2015 - Video Conferencing Mike Groeber Presentation on the general overview of DREAM.3D" http://dream3d.bluequartz.net/?p=1313

Changed:
<
<
tn_tncOct-15b.jpg Mike Groeber, US Air Force Overview of DREAM.3D “Analysing Data with Ease” [6.2.0 Released] DREAM.3d http://dream3d.bluequartz.net/ an open, extensible software environment to allow integrated processing, characterization and manipulation of microstructure digitally. DREAM.3D is an architecture for computational microstructure tools that allows users to create ‘recipes’ or pipelines for processing digital instances of microstructure. DREAM.3D establishes a robust set of checks and development guidelines to enable singular codes to operate in conjunction, facilitating larger research efforts/goals Software Architecture: DREAM3D is written using many open-source libraries in a layered approach that allows developers and implementors to use just the parts that they want to use. DREAM3D has a robust plugin system where new functionality can be added by developers. The licensing allows for both proprietary and open-source plugins.
>
>
tn_tncOct-15b.jpg Mike Groeber, US Air Force Overview of DREAM.3D “Analysing Data with Ease” [6.2.0 Released] DREAM.3d http://dream3d.bluequartz.net/ an open, extensible software environment to allow integrated processing, characterization and manipulation of microstructure digitally. DREAM.3D is an architecture for computational microstructure tools that allows users to create ‘recipes’ or pipelines for processing digital instances of microstructure. DREAM.3D establishes a robust set of checks and development guidelines to enable singular codes to operate in conjunction, facilitating larger research efforts/goals Software Architecture: DREAM3D is written using many open-source libraries in a layered approach that allows developers and implementors to use just the parts that they want to use. DREAM3D has a robust plugin system where new functionality can be added by developers. The licensing allows for both proprietary and open-source plugins.
 

Twelve Tomography Seminars for the Season 2014-2015 all in one picture:

Changed:
<
<
semseason2014_2015.jpgsechalf2015.jpg
>
>
semseason2014_2015.jpgsechalf2015.jpg
  Update on High Powered Lasers exploitation: August 2015


Changed:
<
<
2pm: 2 September 2015 tn_tncSep-15b.jpg The University of Manchester welcomes researchers at all levels to the CCPi imaging workshops where delegates will gain insights from and engage in troubleshooting sessions with specialists in Drishti/Prayog and Avizo. Held at the Photon Science Institute, home to the Henry Mosely X-Ray Imaging Facility (immediately prior to the Tomography for Scientific Advancement Symposium on 3rd-4th September). 2 September 2015 10am-1pm Drishti/Prayog training course - New topics and advanced use within version 2.6 of Drishti including updated version of Paint (release in July 2015; https://github.com/AjayLimaye/drishti/releases) 2 September 2015 1:30pm-4:30pm Avizo training course: 2 workflows related to analysis of fibrous materials will be presented. The second use-case is based a PhD student of Philip Withers, Bo Yu, and illustrates advanced usage of Avizo modules for segmentation. Rémi Blanc "Fibre analysis with Avizo" Abstract: The presentation will highlight different usages of Avizo for tackling with fibrous materials. We consider two major use cases. First, in the case of high magnification with resolved fibers, we will present our recent XFiber extension for tracing the centerline of cylindrical fibers and extracting statistics about the length, orientation, or curvature. The second use case will consider woven composites imaged at lower magnification, where individual fibers cannot be distinguished but the oriented texture of the yarns is visible. We will detail an advanced workflow for classifying the yarns based on their orientation. (http://www.avizo3d.com) 2 September 2015 4pm-5pm IVG (Interactive Visualisation Group), update meeting. Places are limited and allocated on a first come, first serve basis. To book your place please e-mail your name, institution and any dietary requirements to kate.a.meade@manchester.ac.uk Open Day events on 8-11 July 2015 tn_tncJul-15.jpg Schools Visit day; 95 school visitor came to explore the history of computing and 3D space on the visualisation wall. Main public day on 11 July, with over 15000 visitors; and ~560 saw fluid flow and molecular visualisation presentations.Local host for this event is Sri Nagella (srikanth.nagella@stfc.ac.uk) and Ron Fowler (ronald.fowler@stfc.ac.uk)
>
>
2pm: 2 September 2015 tn_tncSep-15b.jpg The University of Manchester welcomes researchers at all levels to the CCPi imaging workshops where delegates will gain insights from and engage in troubleshooting sessions with specialists in Drishti/Prayog and Avizo. Held at the Photon Science Institute, home to the Henry Mosely X-Ray Imaging Facility (immediately prior to the Tomography for Scientific Advancement Symposium on 3rd-4th September). 2 September 2015 10am-1pm Drishti/Prayog training course - New topics and advanced use within version 2.6 of Drishti including updated version of Paint (release in July 2015; https://github.com/AjayLimaye/drishti/releases) 2 September 2015 1:30pm-4:30pm Avizo training course: 2 workflows related to analysis of fibrous materials will be presented. The second use-case is based a PhD student of Philip Withers, Bo Yu, and illustrates advanced usage of Avizo modules for segmentation. Rémi Blanc "Fibre analysis with Avizo" Abstract: The presentation will highlight different usages of Avizo for tackling with fibrous materials. We consider two major use cases. First, in the case of high magnification with resolved fibers, we will present our recent XFiber extension for tracing the centerline of cylindrical fibers and extracting statistics about the length, orientation, or curvature. The second use case will consider woven composites imaged at lower magnification, where individual fibers cannot be distinguished but the oriented texture of the yarns is visible. We will detail an advanced workflow for classifying the yarns based on their orientation. (http://www.avizo3d.com) 2 September 2015 4pm-5pm IVG (Interactive Visualisation Group), update meeting. Places are limited and allocated on a first come, first serve basis. To book your place please e-mail your name, institution and any dietary requirements to kate.a.meade@manchester.ac.uk Open Day events on 8-11 July 2015 tn_tncJul-15.jpg Schools Visit day; 95 school visitor came to explore the history of computing and 3D space on the visualisation wall. Main public day on 11 July, with over 15000 visitors; and ~560 saw fluid flow and molecular visualisation presentations.Local host for this event is Sri Nagella (srikanth.nagella@stfc.ac.uk) and Ron Fowler (ronald.fowler@stfc.ac.uk)
 
Changed:
<
<
2pm-3pm: Friday 24 April 2015 tn_tncApr-15.jpg The Avizo VR Module enables advanced data visualization and analysis with large tiled displays as well as immersive VR configurations like CAVEs. With its unique set of features this Option represents Virtual Reality ready application for scientific and medical visualization in immersive environments. This provides; Full immersive 3D interaction; Support for single and multiple screens; Support for single and multi-pipe and for graphic clusters; Flexible customization for specific display geometry; Head-tracking and tracked hand-held 3D input devices; Control functionality via user interface; and Control of 2D user interfaces with 3D devices (virtual mouse).Local host for this event is Sri Nagella (srikanth.nagella@stfc.ac.uk) 2pm-3pm: Friday 27 March 2015 tn_tncMar-15b.jpg "Noctylio: advanced image analysis software" Sarah Dubreucq, Benoit Recur, Eric Dehez (Noctylio SAS http://www.noctylio.com/) Noctylab v1.0 is a 3D imaging software including a large range of up-to-date image and signal processing algorithms as standards, different 3D visualisation modes such as surface and volume rendering, as well as image and signal analysis, measures and quantification tools. Noctylab v1.0 handles processing sequences that can be created, optimized and thus launched on large datasets in order to maximize computing resource usage and minimize user interactions. Specifically, we will show how Noctylab v1.0 implements tubular shape analysis sequence (archeo-bronchial tree or vascularity) based on 3D skeletonization and topology, in order to get caliber measures along branches. Moreover, the software adaptability allows the exploitation of all these tools from new imaging modalities, such as THz scanners. We will also introduce tools dedicated to hyper-spectral analysis and adapted to time-domain spectroscopy or 3D THz imaging. Such tools aim at combining both image and signal processing techniques to obtain 3D visualisation and benefit from image-based measures/analysis tools from hyper-spectral signals.
>
>
2pm-3pm: Friday 24 April 2015 tn_tncApr-15.jpg The Avizo VR Module enables advanced data visualization and analysis with large tiled displays as well as immersive VR configurations like CAVEs. With its unique set of features this Option represents Virtual Reality ready application for scientific and medical visualization in immersive environments. This provides; Full immersive 3D interaction; Support for single and multiple screens; Support for single and multi-pipe and for graphic clusters; Flexible customization for specific display geometry; Head-tracking and tracked hand-held 3D input devices; Control functionality via user interface; and Control of 2D user interfaces with 3D devices (virtual mouse).Local host for this event is Sri Nagella (srikanth.nagella@stfc.ac.uk) 2pm-3pm: Friday 27 March 2015 tn_tncMar-15b.jpg "Noctylio: advanced image analysis software" Sarah Dubreucq, Benoit Recur, Eric Dehez (Noctylio SAS http://www.noctylio.com/) Noctylab v1.0 is a 3D imaging software including a large range of up-to-date image and signal processing algorithms as standards, different 3D visualisation modes such as surface and volume rendering, as well as image and signal analysis, measures and quantification tools. Noctylab v1.0 handles processing sequences that can be created, optimized and thus launched on large datasets in order to maximize computing resource usage and minimize user interactions. Specifically, we will show how Noctylab v1.0 implements tubular shape analysis sequence (archeo-bronchial tree or vascularity) based on 3D skeletonization and topology, in order to get caliber measures along branches. Moreover, the software adaptability allows the exploitation of all these tools from new imaging modalities, such as THz scanners. We will also introduce tools dedicated to hyper-spectral analysis and adapted to time-domain spectroscopy or 3D THz imaging. Such tools aim at combining both image and signal processing techniques to obtain 3D visualisation and benefit from image-based measures/analysis tools from hyper-spectral signals.
 
Changed:
<
<
3pm-3:30pm: Friday 27 February 2014. tn_tncFeb-15.jpg The University of Manchester has recently purchased a Rapiscan RTT x-ray CT Machine, located in the School of Materials' Henry Moseley X-ray Imaging Facility (HMXIF). The RTT110 is capable of producing 3D images in real time, making it the fastest imager in the UK. Currently set-up for airport baggage scanning, we aim to adapt the machine to utilise its potential for a wide range of experiments, such as granular and multi-phase flows using dynamic x-ray CT. This will be at 3pm at Rutherford Appleton Laboratory on the Harwell Campus: in R89/Room S44 and room Arkwright in DL. 3:30pm-4pm: Friday 27 February 2015 tn_tncFeb-15b.jpg IMAT is the first neutron imaging instrument at ISIS. It will also be the first of its kind in the world offering unique time-of-flight tomography-driven diffraction techniques. This project aims to enable novel experimental science capabilities for IMAT through developing and deploying HPC based infrastructure needed for in-experiment tomographic image reconstruction, rendering, and interactions. It will also build the foundation needed to enable energy selective image processing, data fitting and 3D tomography driven diffraction data scrutiny capabilities for IMAT. Details at: http://stfc.ac.uk/SCD/research/data/44593.aspx
>
>
3pm-3:30pm: Friday 27 February 2014. tn_tncFeb-15.jpg The University of Manchester has recently purchased a Rapiscan RTT x-ray CT Machine, located in the School of Materials' Henry Moseley X-ray Imaging Facility (HMXIF). The RTT110 is capable of producing 3D images in real time, making it the fastest imager in the UK. Currently set-up for airport baggage scanning, we aim to adapt the machine to utilise its potential for a wide range of experiments, such as granular and multi-phase flows using dynamic x-ray CT. This will be at 3pm at Rutherford Appleton Laboratory on the Harwell Campus: in R89/Room S44 and room Arkwright in DL. 3:30pm-4pm: Friday 27 February 2015 tn_tncFeb-15b.jpg IMAT is the first neutron imaging instrument at ISIS. It will also be the first of its kind in the world offering unique time-of-flight tomography-driven diffraction techniques. This project aims to enable novel experimental science capabilities for IMAT through developing and deploying HPC based infrastructure needed for in-experiment tomographic image reconstruction, rendering, and interactions. It will also build the foundation needed to enable energy selective image processing, data fitting and 3D tomography driven diffraction data scrutiny capabilities for IMAT. Details at: http://stfc.ac.uk/SCD/research/data/44593.aspx
 
Line: 282 to 280
 
Changed:
<
<
2pm-3pm: Thursday 18 December 2014. tn_tncDec-14b2.jpg "Data and Visualisation Needs Survey" Through the EPSRC SLA and via the University of Manchester we have been asked to coordinate some visualisation surveys across certain disciplines. This is to inform current uses as well as indicate trends and developments for future collaboration and high impact visualisation uses. The main surveys completed at the end of October 2014, and are currently being evaluated for long term embedding into a visualisation service. This will be at 2pm at Rutherford Appleton Laboratory on the Harwell Campus: in R89/Access Grid and room A1 in DL from 2pm https://eventbooking.stfc.ac.uk/news-events/3d-volume-data-visualisation-dec14b 2pm-3pm: Friday 12 December 2014 tn_tncDec-14.jpg Talk by Prof Sarah Hainsworth, University of Leicester "Micro-computed X-ray tomography for forensic applications" Micro-computed X-ray tomography allows the 3D visualisation of structures with higher resolution than traditional computed tomography used in medical applications. This talk will show how micro-computed tomography has been used in a number of forensic applications including tool marks in dismemberment, determining the structural development of blow flies and imaging a 500 year old King, namely Richard III. This will be at 2pm at Rutherford Appleton Laboratory on the Harwell Campus: in the RC@H "Research Complex at Harwell" from 2pm. https://eventbooking.stfc.ac.uk/news-events/3d-volume-data-visualisation-dec14 Sarah has a BEng and doctorate from the University of Newcastle and is a Chartered Engineer (CEng), Chartered Scientist (CSci), and a Fellow of the Institute of Materials, Minerals, and Mining (FIMMM). She was the recipient of the Institution of Mechanical Engineers Tribology Bronze Medal in 1995, the Rosenhain Medal of the Institute of Materials, Minerals, and Mining in 2008, and was nominated as one the Women's Engineering Society's Outstanding Technical Women in 2009. In the area of forensic engineering, research is into two main areas, forces involved in stabbing and characterising tool marks in injury and dismemberment.
>
>
2pm-3pm: Thursday 18 December 2014. tn_tncDec-14b2.jpg "Data and Visualisation Needs Survey" Through the EPSRC SLA and via the University of Manchester we have been asked to coordinate some visualisation surveys across certain disciplines. This is to inform current uses as well as indicate trends and developments for future collaboration and high impact visualisation uses. The main surveys completed at the end of October 2014, and are currently being evaluated for long term embedding into a visualisation service. This will be at 2pm at Rutherford Appleton Laboratory on the Harwell Campus: in R89/Access Grid and room A1 in DL from 2pm https://eventbooking.stfc.ac.uk/news-events/3d-volume-data-visualisation-dec14b 2pm-3pm: Friday 12 December 2014 tn_tncDec-14.jpg Talk by Prof Sarah Hainsworth, University of Leicester "Micro-computed X-ray tomography for forensic applications" Micro-computed X-ray tomography allows the 3D visualisation of structures with higher resolution than traditional computed tomography used in medical applications. This talk will show how micro-computed tomography has been used in a number of forensic applications including tool marks in dismemberment, determining the structural development of blow flies and imaging a 500 year old King, namely Richard III. This will be at 2pm at Rutherford Appleton Laboratory on the Harwell Campus: in the RC@H "Research Complex at Harwell" from 2pm. https://eventbooking.stfc.ac.uk/news-events/3d-volume-data-visualisation-dec14 Sarah has a BEng and doctorate from the University of Newcastle and is a Chartered Engineer (CEng), Chartered Scientist (CSci), and a Fellow of the Institute of Materials, Minerals, and Mining (FIMMM). She was the recipient of the Institution of Mechanical Engineers Tribology Bronze Medal in 1995, the Rosenhain Medal of the Institute of Materials, Minerals, and Mining in 2008, and was nominated as one the Women's Engineering Society's Outstanding Technical Women in 2009. In the area of forensic engineering, research is into two main areas, forces involved in stabbing and characterising tool marks in injury and dismemberment.
 
Changed:
<
<
3pm-4pm: Wednesday 26 November 2014. tn_tncNov-14.jpg Sam Worthington (Worthington Sharpe Ltd.) Title "Wing: Beyond the mouse". At Daresbury Labs (STFC) A1 Rylands "The Wing" combines full 3D control with the precision of a professional laser mouse. It is initially designed to meet the demands of Uninhabited Aerial Vehicle and Remotely Operated Vehicle control, Computer Aided Design software, Virtual Reality, and simulation or training games. The Wing is ideal for any application requiring the speed and accuracy of a high-end mouse, as well as free-flowing and intuitive 3D interaction. This will be at 3pm in A1 Rylands Room at Daresbury Laboratory. http://www.worthingtonsharpe.com/index.html wing@worthingtonsharpe.com 3pm-4pm: Friday 10 October 2014 tn_tncOct-14b3.jpg - Talk by Russell Garwood* *Seminar @RAL in R89/S44 Open source software for visualising tomographic datasets: Russell Garwood; University of Manchester. “This talk will provide an overview of free and/or open source software for processing and visualising tomographic datasets. It will be followed by a discussion of other software/tools for performing quantitative analysis of this data. One of the greatest weaknesses of open source packages available - or indeed my knowledge of what's out there - is a lack of free tools for quantifying tomographic data.“ Atlas Building – This will be at 3pm in the Atlas Visualisation Facility that can be found in the Atlas Building at Rutherford Appleton Laboratory on the Harwell Campus. https://eventbooking.stfc.ac.uk/news-events/3d-volume-data-visualisation-oct14
>
>
3pm-4pm: Wednesday 26 November 2014. tn_tncNov-14.jpg Sam Worthington (Worthington Sharpe Ltd.) Title "Wing: Beyond the mouse". At Daresbury Labs (STFC) A1 Rylands "The Wing" combines full 3D control with the precision of a professional laser mouse. It is initially designed to meet the demands of Uninhabited Aerial Vehicle and Remotely Operated Vehicle control, Computer Aided Design software, Virtual Reality, and simulation or training games. The Wing is ideal for any application requiring the speed and accuracy of a high-end mouse, as well as free-flowing and intuitive 3D interaction. This will be at 3pm in A1 Rylands Room at Daresbury Laboratory. http://www.worthingtonsharpe.com/index.html wing@worthingtonsharpe.com 3pm-4pm: Friday 10 October 2014 tn_tncOct-14b3.jpg - Talk by Russell Garwood* *Seminar @RAL in R89/S44 Open source software for visualising tomographic datasets: Russell Garwood; University of Manchester. “This talk will provide an overview of free and/or open source software for processing and visualising tomographic datasets. It will be followed by a discussion of other software/tools for performing quantitative analysis of this data. One of the greatest weaknesses of open source packages available - or indeed my knowledge of what's out there - is a lack of free tools for quantifying tomographic data.“ Atlas Building – This will be at 3pm in the Atlas Visualisation Facility that can be found in the Atlas Building at Rutherford Appleton Laboratory on the Harwell Campus. https://eventbooking.stfc.ac.uk/news-events/3d-volume-data-visualisation-oct14
 
Changed:
<
<
3pm-4pm Friday 26th September 2014 tn_tncSep-14bb.jpg "Image-based simulation of diffusion and flows within experimental volumetric data sets Dr Marcus Campbell Bannerman, University of Aberdeen" Seminar in R89/S44 With the proliferation and availability of X-ray imaging facilities, the size of volumetric data sets and their rate of collection has increased by orders of magnitude in recent years. The manual reconstruction of these transmission images, image analysis, and extraction of indirect information through simulation is rate limiting as it requires extensive user input and experience. In order to remove this barrier, and to provide the additional benefit of image-based modelling, we believe the integration and automation of a “data pipeline” is required and this is the focus of a recent EPSRC sponsorship award (EP/L026716/1). The first part of this presentation will introduce some early work on a new mesh-free method for statistical simulation of molecular flows within the domain of an imaged pore-space. This work uses the DynamO code (http://dynamomd.org) and overcomes the difficulty of automated mesh generation by directly using the image data-set as the domain of the simulation. This allows a time-to-simulation of the order of hours rather than days for extraction of parameters such as anisotropic diffusion coefficients. The second part of the talk will present the visualisation library of DynamO. This software allows the real-time visualisation of large (N=10^6) systems of particles and volumetric data using a variety of techniques (instancing, bill-boarding, ray-tracing, HDR). Both topics are presented as works in progress, so feedback with vigorous debate and discussion is welcome and highly encouraged! This will be at 3pm in S44 room in R89. 10am-3pm Monday 8th September 2014 tn_tncSep-14.jpg "Drishti 2.5 Workshop" Drishti 2.5 has just been released on 27 July 2014, and on Monday 8 September, Ajay Limaye is arriving at RAL to give a workshop and discussion of the features. (http://sf.anu.edu.au/Vizlab/drishti/) Latest Code: https://github.com/AjayLimaye/drishti Email Sri (srikanth.nagella@stfc.ac.uk) or Loic (loic.courtois@manchester.ac.uk) to book a spot - being held in RAL, please email as limited space. Schedule: 9am- Coffee/tea 10am-short workshop on Drishti 12:30 Lunch and tours (Loic Courtois) 2pm-4pm Discuss vis data issues
>
>
3pm-4pm Friday 26th September 2014 tn_tncSep-14bb.jpg "Image-based simulation of diffusion and flows within experimental volumetric data sets Dr Marcus Campbell Bannerman, University of Aberdeen" Seminar in R89/S44 With the proliferation and availability of X-ray imaging facilities, the size of volumetric data sets and their rate of collection has increased by orders of magnitude in recent years. The manual reconstruction of these transmission images, image analysis, and extraction of indirect information through simulation is rate limiting as it requires extensive user input and experience. In order to remove this barrier, and to provide the additional benefit of image-based modelling, we believe the integration and automation of a “data pipeline” is required and this is the focus of a recent EPSRC sponsorship award (EP/L026716/1). The first part of this presentation will introduce some early work on a new mesh-free method for statistical simulation of molecular flows within the domain of an imaged pore-space. This work uses the DynamO code (http://dynamomd.org) and overcomes the difficulty of automated mesh generation by directly using the image data-set as the domain of the simulation. This allows a time-to-simulation of the order of hours rather than days for extraction of parameters such as anisotropic diffusion coefficients. The second part of the talk will present the visualisation library of DynamO. This software allows the real-time visualisation of large (N=10^6) systems of particles and volumetric data using a variety of techniques (instancing, bill-boarding, ray-tracing, HDR). Both topics are presented as works in progress, so feedback with vigorous debate and discussion is welcome and highly encouraged! This will be at 3pm in S44 room in R89. 10am-3pm Monday 8th September 2014 tn_tncSep-14.jpg "Drishti 2.5 Workshop" Drishti 2.5 has just been released on 27 July 2014, and on Monday 8 September, Ajay Limaye is arriving at RAL to give a workshop and discussion of the features. (http://sf.anu.edu.au/Vizlab/drishti/) Latest Code: https://github.com/AjayLimaye/drishti Email Sri (srikanth.nagella@stfc.ac.uk) or Loic (loic.courtois@manchester.ac.uk) to book a spot - being held in RAL, please email as limited space. Schedule: 9am- Coffee/tea 10am-short workshop on Drishti 12:30 Lunch and tours (Loic Courtois) 2pm-4pm Discuss vis data issues
 
Added:
>
>
  Twelve Tomography Seminars for the Season 2013-2014 all in one picture:
Changed:
<
<
semseason2013_2014.jpg
>
>
semseason2013_2014.jpg
 
Changed:
<
<
2pm-4pm Friday 1st August 2014 tn_tncAug-14b.jpg "Bring Your Own Data Day II" Do you have volume image data you'd like to analyse? Or do you have an analysis method that you want to make more efficient? If so, come along to the CCPi Bring Your Data day at the Atlas Visualisation Facility at RAL on Aug 1st from 2pm. We will provide help with image analysis using Avizo and Avizo Fire whether it's image registration, thresholding, segmentation or extracting data from the image. We can also talk about scripting the calculations and even creating custom modules to implement your algorithms using C++ and ITK where appropriate. We will have a large memory machine (1/2TB) available if you have a large amount of data. We can also display laptops on the big screen if you wish to keep data on your own machine - The meeting will start at 2pm in the Atlas Visualisation Facility. This can be found in the Atlas Building at Rutherford Appleton Laboratory on the Harwell Campus. https://eventbooking.stfc.ac.uk/news-events/3d-volume-data-visualisation-Aug14
>
>
2pm-4pm Friday 1st August 2014 tn_tncAug-14b.jpg "Bring Your Own Data Day II" Do you have volume image data you'd like to analyse? Or do you have an analysis method that you want to make more efficient? If so, come along to the CCPi Bring Your Data day at the Atlas Visualisation Facility at RAL on Aug 1st from 2pm. We will provide help with image analysis using Avizo and Avizo Fire whether it's image registration, thresholding, segmentation or extracting data from the image. We can also talk about scripting the calculations and even creating custom modules to implement your algorithms using C++ and ITK where appropriate. We will have a large memory machine (1/2TB) available if you have a large amount of data. We can also display laptops on the big screen if you wish to keep data on your own machine - The meeting will start at 2pm in the Atlas Visualisation Facility. This can be found in the Atlas Building at Rutherford Appleton Laboratory on the Harwell Campus. https://eventbooking.stfc.ac.uk/news-events/3d-volume-data-visualisation-Aug14
 
Changed:
<
<
2pm, Thursday 26th June 2014 tn_tncJun-14.jpg Welcome to the Data Analysis WorkbeNch. Data Analysis WorkbeNch (DAWN) is an eclipse based workbench for doing scientific data analysis. It implements sophisticated support for : (1) Visualization of data in 1D, 2D and 3D (2) Python script development, debugging and execution and (3) Workflows for analyzing scientific data calling Python and binary codes. DAWN is not restricted to one scientific domain. It is developed by and for the synchrotron community foremost but has strong overlap with other communities like neutron scattering, photon science and any scientific communities with the above or similar needs: http://www.dawnsci.org/ The meeting will start at 2pm in the Atlas Visualisation Facility. This can be found in the Atlas Building at Rutherford Appleton Laboratory on the Harwell Campus. https://eventbooking.stfc.ac.uk/news-events/3d-volume-data-visualisation-jun14 2pm Friday 30th May 2014 tn_tncMay-14.jpg "Paraview Volume Visualisation" ParaView has improved its volume visualiser quiet drastically in the last year. We will informally consider this product over an informal discussion - and show volume vis on the large Atlas Visualisation Facility. (http://www.youtube.com/watch?v=UwKFg0yOlCA). Comparisons with Drishti and Avizo's offerings will be presented. Thoughts on new devices; including touchtables and large touch screens will be presented. The meeting will start at 3pm in the Atlas Visualisation Facility. This can be found in the Atlas Building at Rutherford Appleton Laboratory on the Harwell Campus. 2pm-3pm Pre-Coffee in Electron Building (next door) - TSB Space Applications Catapult Centre No booking required - but welcome to email for detailed logistics: martin.turner@stfc.ac.uk
>
>
2pm, Thursday 26th June 2014 tn_tncJun-14.jpg Welcome to the Data Analysis WorkbeNch. Data Analysis WorkbeNch (DAWN) is an eclipse based workbench for doing scientific data analysis. It implements sophisticated support for : (1) Visualization of data in 1D, 2D and 3D (2) Python script development, debugging and execution and (3) Workflows for analyzing scientific data calling Python and binary codes. DAWN is not restricted to one scientific domain. It is developed by and for the synchrotron community foremost but has strong overlap with other communities like neutron scattering, photon science and any scientific communities with the above or similar needs: http://www.dawnsci.org/ The meeting will start at 2pm in the Atlas Visualisation Facility. This can be found in the Atlas Building at Rutherford Appleton Laboratory on the Harwell Campus. https://eventbooking.stfc.ac.uk/news-events/3d-volume-data-visualisation-jun14 2pm Friday 30th May 2014 tn_tncMay-14.jpg "Paraview Volume Visualisation" ParaView has improved its volume visualiser quiet drastically in the last year. We will informally consider this product over an informal discussion - and show volume vis on the large Atlas Visualisation Facility. (http://www.youtube.com/watch?v=UwKFg0yOlCA). Comparisons with Drishti and Avizo's offerings will be presented. Thoughts on new devices; including touchtables and large touch screens will be presented. The meeting will start at 3pm in the Atlas Visualisation Facility. This can be found in the Atlas Building at Rutherford Appleton Laboratory on the Harwell Campus. 2pm-3pm Pre-Coffee in Electron Building (next door) - TSB Space Applications Catapult Centre No booking required - but welcome to email for detailed logistics: martin.turner@stfc.ac.uk
 
Changed:
<
<
9:30am, Thursday 8th May 2014 tn_tncMayA-14.jpg Avizo 8.1 has just been released in April 2014, and on Thursday 8 May, Joseph Baptista and Fabien Arnaud from VSG/FEI will be giving a short workshop in RAL. For Materials Science users there are two main features; improved FFT, Porosity calculations and also direct links to FEI imaging machines. http://www.vsg3d.com/sites/default/files/WhatsNewAvizo81.pdf Email Sri (srikanth.nagella@stfc.ac.uk) to book a spot - being held in RAL, please email as limited space. 3pm, Friday 28th March 2014 tn_tncMar-14.jpg Digital Volume Correlation (DVC) from LaVision - a novel tool for quantifying full-field displacement and strains" Abstract: Dave Hollis from LaVision will be discussing DVC. Digital Volume Correlation (DVC) is a novel tool for quantifying full-field displacement and strains throughout material volumes having undergone deformation. The technique is an extension of 2D digital image correlation and uses the conservation of gray-scale levels of 3D volumes obtained using a volume imaging technique such as X-ray CT. The material’s natural or artificially introduced internal pattern is tracked between subsequent volumes allowing the investigator to truly understand the subsurface material behaviour and validate complex simulations. In this meeting Dave Hollis from LaVision (dhollis at lavision.com) will give an overview of the technique and show some of the results possible. Also present will be Faye Gillard of The University of Southampton muVis centre, and has experience of applying DVC to a variety of materials and test cases. Faye is a Knowledge Transfer Secondee (KTS) working with muvis and LaVision to further develop the technique by exploring new materials and applications. There will be ample opportunity to discuss DVC with Dave and Faye during this meeting. The meeting will start at 3pm in the Atlas Visualisation Facility. This can be found in the Atlas Building at Rutherford Appleton Laboratory on the Harwell Campus. https://eventbooking.stfc.ac.uk/news-events/3d-volume-data-visualisation-mar14
>
>
9:30am, Thursday 8th May 2014 tn_tncMayA-14.jpg Avizo 8.1 has just been released in April 2014, and on Thursday 8 May, Joseph Baptista and Fabien Arnaud from VSG/FEI will be giving a short workshop in RAL. For Materials Science users there are two main features; improved FFT, Porosity calculations and also direct links to FEI imaging machines. http://www.vsg3d.com/sites/default/files/WhatsNewAvizo81.pdf Email Sri (srikanth.nagella@stfc.ac.uk) to book a spot - being held in RAL, please email as limited space. 3pm, Friday 28th March 2014 tn_tncMar-14.jpg Digital Volume Correlation (DVC) from LaVision - a novel tool for quantifying full-field displacement and strains" Abstract: Dave Hollis from LaVision will be discussing DVC. Digital Volume Correlation (DVC) is a novel tool for quantifying full-field displacement and strains throughout material volumes having undergone deformation. The technique is an extension of 2D digital image correlation and uses the conservation of gray-scale levels of 3D volumes obtained using a volume imaging technique such as X-ray CT. The material’s natural or artificially introduced internal pattern is tracked between subsequent volumes allowing the investigator to truly understand the subsurface material behaviour and validate complex simulations. In this meeting Dave Hollis from LaVision (dhollis at lavision.com) will give an overview of the technique and show some of the results possible. Also present will be Faye Gillard of The University of Southampton muVis centre, and has experience of applying DVC to a variety of materials and test cases. Faye is a Knowledge Transfer Secondee (KTS) working with muvis and LaVision to further develop the technique by exploring new materials and applications. There will be ample opportunity to discuss DVC with Dave and Faye during this meeting. The meeting will start at 3pm in the Atlas Visualisation Facility. This can be found in the Atlas Building at Rutherford Appleton Laboratory on the Harwell Campus. https://eventbooking.stfc.ac.uk/news-events/3d-volume-data-visualisation-mar14
 
Changed:
<
<
3pm, Friday 28th February 2014 tn_tncFeb-14.jpg Jon Taylor (ISIS): The Mantid project provides a framework that supports high-performance computing and visualisation of scientific data. Mantid has been created to manipulate and analyse Neutron and Muon scattering data, but could be applied to many other techniques. The framework is open source and supported on multiple target platforms (Windows, Linux, Mac). (http://www.mantidproject.org/Main_Page) The meeting will start at 3pm in the Atlas Visualisation Facility. This can be found in the Atlas Building at Rutherford Appleton Laboratory on the Harwell Campus. https://eventbooking.stfc.ac.uk/news-events/3d-volume-data-visualisation-feb14 3pm, Friday 31st January 2014 tn_tncJan-13.jpg "NIRFAST: An interactive GUI driven toolbox for modeling and image reconstruction in optical imaging" Hamid Dehghani. Nirfast is an FEM based package for modeling Near-Infrared light transport in tissue.This includes standard single wavelength absorption and scatter, multi-wavelength spectrally constrained models and fluorescence models. We will outline the development of NIRFAST for applications in diffuse optical imaging and provide examples of clinical and pre-clinical studies. The talk will highlight on unique features of NIRFAST, including pre-processing (volumetric meshing) to prediction of light propagation in biological media, as well as a set of novel image recovery algorithms. The meeting will start at 3pm in the Atlas Visualisation Facility. This can be found in the Atlas Building at Rutherford Appleton Laboratory on the Harwell Campus. https://eventbooking.stfc.ac.uk/news-events/3d-volume-data-visualisation-jan14
>
>
3pm, Friday 28th February 2014 tn_tncFeb-14.jpg Jon Taylor (ISIS): The Mantid project provides a framework that supports high-performance computing and visualisation of scientific data. Mantid has been created to manipulate and analyse Neutron and Muon scattering data, but could be applied to many other techniques. The framework is open source and supported on multiple target platforms (Windows, Linux, Mac). (http://www.mantidproject.org/Main_Page) The meeting will start at 3pm in the Atlas Visualisation Facility. This can be found in the Atlas Building at Rutherford Appleton Laboratory on the Harwell Campus. https://eventbooking.stfc.ac.uk/news-events/3d-volume-data-visualisation-feb14 3pm, Friday 31st January 2014 tn_tncJan-13.jpg "NIRFAST: An interactive GUI driven toolbox for modeling and image reconstruction in optical imaging" Hamid Dehghani. Nirfast is an FEM based package for modeling Near-Infrared light transport in tissue.This includes standard single wavelength absorption and scatter, multi-wavelength spectrally constrained models and fluorescence models. We will outline the development of NIRFAST for applications in diffuse optical imaging and provide examples of clinical and pre-clinical studies. The talk will highlight on unique features of NIRFAST, including pre-processing (volumetric meshing) to prediction of light propagation in biological media, as well as a set of novel image recovery algorithms. The meeting will start at 3pm in the Atlas Visualisation Facility. This can be found in the Atlas Building at Rutherford Appleton Laboratory on the Harwell Campus. https://eventbooking.stfc.ac.uk/news-events/3d-volume-data-visualisation-jan14
 
Changed:
<
<
10am to 4pm, Friday 20th December 2013 tn_tncDec-13b.jpg Bring Your Own Data Day; "Do you have volume image data you'd like to analyse? Or do you have an analysis method that you want to make more efficient?" If so, come along to the CCPi Bring Your Data day at the Atlas Visualisation Facility at RAL on Dec 20th from 10am. We will provide help with image analysis using Avizo and Avizo Fire whether it's image registration, thresholding, segmentation or extracting data from the image. Atlas Building – Atlas Visualisation Facility https://eventbooking.stfc.ac.uk/news-events/3d-volume-data-visualisation-dec13 3pm, Friday 29th November 2013 tn_tncNov-13b.jpg CCPi Image Quantification Tools – within VolView and Avizo: presented by David Worth. Available from the CCPi CCPForge repository: VolView and Avizo" Download modules from: http://ccpforge.cse.rl.ac.uk/gf/project/iqa/frs/ Atlas Building – Atlas Visualisation Facility https://eventbooking.stfc.ac.uk/news-events/3d-volume-data-visualisation-nov13
>
>
10am to 4pm, Friday 20th December 2013 tn_tncDec-13b.jpg Bring Your Own Data Day; "Do you have volume image data you'd like to analyse? Or do you have an analysis method that you want to make more efficient?" If so, come along to the CCPi Bring Your Data day at the Atlas Visualisation Facility at RAL on Dec 20th from 10am. We will provide help with image analysis using Avizo and Avizo Fire whether it's image registration, thresholding, segmentation or extracting data from the image. Atlas Building – Atlas Visualisation Facility https://eventbooking.stfc.ac.uk/news-events/3d-volume-data-visualisation-dec13 3pm, Friday 29th November 2013 tn_tncNov-13b.jpg CCPi Image Quantification Tools – within VolView and Avizo: presented by David Worth. Available from the CCPi CCPForge repository: VolView and Avizo" Download modules from: http://ccpforge.cse.rl.ac.uk/gf/project/iqa/frs/ Atlas Building – Atlas Visualisation Facility https://eventbooking.stfc.ac.uk/news-events/3d-volume-data-visualisation-nov13
 
Changed:
<
<
3pm, Friday 25th October 2013 tn_tncOct-13.jpg 3D Volume Data Visualisation: Software show-and-tell. The open-source drishti visualiser: examples and ideas from desktop to power-wall. Atlas Building – Atlas Visualisation Facility https://eventbooking.stfc.ac.uk/news-events/3d-volume-data-visualisation 3pm, Friday 27th September 2013 tn_tncSep-13.jpg The Hartree Centre in collaboration with Harwell Imaging Partnership (HIP) has now opened a new facility for visualisation in the Atlas building at RAL. This is located in the CR08 room which is fully refurbished and fitted with an immersive 3D system including head tracking. We have a dedicated team of technical experts who are able to help users to port their applications and data to the 3D display and also in their data analysis needs. Seminars consisting of a short talks/show-and-tells along with opportunity to discuss visualisation needs with your data.

Friday 20th August 2013 tn_tncAug-13.jpg The Hartee Centre in collaboration with Harwell Imaging Partnership (HIP) has opened a visualisation facility in the Atlas building in RAL. This is located in the CR08 room which is fully refurbished and fitted with an immersive 3D system including head tracking.The aim is for software sharing and dissemination; and to this end a three year software contract for Avizo (3D Volume Visualisation from VSG[FEI]) has been purchased across SCD, DLS and RCaH.There is a dedicated 10GbE network connection between this room and the Hartree Centre’s IBM BlueGene and Blue Wonder computers at Daresbury Lab for visualising application results. This facility also has two high memory visualisation machine each with ˝ TB RAM. They are installed with most of the popular open source visualisation applications and some commercial applications including Avizo (http://www.vsg3d.com/avizo/overview); ideal for example for quantitative visualisation of tomographic image volumes as collected at Diamond.
>
>
3pm, Friday 25th October 2013 tn_tncOct-13.jpg 3D Volume Data Visualisation: Software show-and-tell. The open-source drishti visualiser: examples and ideas from desktop to power-wall. Atlas Building – Atlas Visualisation Facility https://eventbooking.stfc.ac.uk/news-events/3d-volume-data-visualisation 3pm, Friday 27th September 2013 tn_tncSep-13.jpg The Hartree Centre in collaboration with Harwell Imaging Partnership (HIP) has now opened a new facility for visualisation in the Atlas building at RAL. This is located in the CR08 room which is fully refurbished and fitted with an immersive 3D system including head tracking. We have a dedicated team of technical experts who are able to help users to port their applications and data to the 3D display and also in their data analysis needs. Seminars consisting of a short talks/show-and-tells along with opportunity to discuss visualisation needs with your data.
 
Added:
>
>
Friday 20th August 2013 tn_tncAug-13.jpg The Hartee Centre in collaboration with Harwell Imaging Partnership (HIP) has opened a visualisation facility in the Atlas building in RAL. This is located in the CR08 room which is fully refurbished and fitted with an immersive 3D system including head tracking.The aim is for software sharing and dissemination; and to this end a three year software contract for Avizo (3D Volume Visualisation from VSG[FEI]) has been purchased across SCD, DLS and RCaH.There is a dedicated 10GbE network connection between this room and the Hartree Centre’s IBM BlueGene and Blue Wonder computers at Daresbury Lab for visualising application results. This facility also has two high memory visualisation machine each with ˝ TB RAM. They are installed with most of the popular open source visualisation applications and some commercial applications including Avizo (http://www.vsg3d.com/avizo/overview); ideal for example for quantitative visualisation of tomographic image volumes as collected at Diamond.
 Meeting List 2015-2016: Tomo-Coffee and training vis events; so far, 9 attendees.
Changed:
<
<
  • Novitom inc at RAL and link to Manchester 12 September 2016 [8+1](9)
  • Lucia Mancini 7 October 2016 (28)
  • Mark Basham, Imano Luengo, Michele Darrow SuRVoS 31 January 2017 (29; 24+5)
  • Hamish Carr 9 February 2017 (16)
  • Flagship meeting 20 March 2017 ()
  • ...
>
>
  • Novitom inc at RAL and link to Manchester 12 September 2016 [8+1](9)
  • Lucia Mancini 7 October 2016 (28)
  • Mark Basham, Imano Luengo, Michele Darrow SuRVoS 31 January 2017 (29; 24+5)
  • Hamish Carr 9 February 2017 (16)
  • Flagship meeting 20 March 2017 ()
  • ...
  Total first three years - 551 attendees

Meeting List 2015-2016: Tomo-Coffee and ParaView events; 184+ attendees.

Changed:
<
<
  • Seminars alternative to an Away Day up to ToScA in Manchester for 2 September 2015 (27)
  • Monday 19 October 2015 - DREAM3D (9+4+??)
  • Friday 30 October 2015 - Antoniu Pop (11)
  • Thursday 26 November 2015 - Not yet becoming IronMan – but software for Touchable Scientific Visualisations (12)
  • Monday 14 December 2015 - Bring and discsuss your own data and see the Virtual reality visualsation (RAL only) (5)
  • Wednesday 13 January 2016 - Jakob Sauer Jorgensen (10)
  • 16 March 2016 - Michael McCarthy (NPL) (31)
  • 9 June 2016 - Fringe Meeting (15)
  • 6 July, 11 July and 14 July 2016 - special meetings for vis review (??)
  • Friday 11 August 2016 - CCPi Interactive Vis (12)
  • Friday 11 July 2016 - TIGRE launch (10)
  • 12 September 2016 (4 + 9) 8 September 2016 (14) TomViz.org demonstrator [29]
>
>
  • Seminars alternative to an Away Day up to ToScA in Manchester for 2 September 2015 (27)
  • Monday 19 October 2015 - DREAM3D (9+4+??)
  • Friday 30 October 2015 - Antoniu Pop (11)
  • Thursday 26 November 2015 - Not yet becoming IronMan – but software for Touchable Scientific Visualisations (12)
  • Monday 14 December 2015 - Bring and discsuss your own data and see the Virtual reality visualsation (RAL only) (5)
  • Wednesday 13 January 2016 - Jakob Sauer Jorgensen (10)
  • 16 March 2016 - Michael McCarthy (NPL) (31)
  • 9 June 2016 - Fringe Meeting (15)
  • 6 July, 11 July and 14 July 2016 - special meetings for vis review (??)
  • Friday 11 August 2016 - CCPi Interactive Vis (12)
  • Friday 11 July 2016 - TIGRE launch (10)
  • 12 September 2016 (4 + 9) 8 September 2016 (14) TomViz.org demonstrator [29]
  Meeting List 2014-2015: Tomo-Coffee and ParaView events; 203 attendees.
Changed:
<
<
  • Paraview - 28 August 2014 TomViz (18) Meet the author
  • Monday 8 September 2014 Drishti visualiser - Meet the author (am 15; pm 5)
  • Friday 26 September 2014 "Image-based simulation of diffusion and flows within experimental volumetric data sets" Dr Marcus Campbell Bannerman, University of Aberdeen (26)
  • Friday 10 October 2014 Russell Garwood "Open source software for visualising tomographic datasets" (16)
  • Wednesday 26 November 2014. Sam Worthington (Worthington Sharpe Ltd.) Title "Wing: Beyond the mouse". At Daresbury Labs (STFC) A1 Rylands (10)
  • Friday 12 December 2014 - Talk by Prof Sarah Hainsworth, University of Leicester(27+)
  • Thursday 18 December 2014 - Data and Visualisation Needs Survey , Martin Turner, Tim Morris and Ron Fowler (9)
  • Friday 27 February 2015 - Fast X-ray reconstructioon and IMAT framework (18+3+5 - three site meetings)
  • Friday 27 March 2015 - Image Analysis program from NOCTYlab (10)
  • Friday 24 April 2015 - Avizo VR Module Demonstration (7) Extra session on 7 May 2015 (8)
  • Open Day events on 8-11 July 2015, pre-event (6)
  • Seminars alternative to an Away Day up to ToScA in Manchester for 2 September 2015 (27)
>
>
  • Paraview - 28 August 2014 TomViz (18) Meet the author
  • Monday 8 September 2014 Drishti visualiser - Meet the author (am 15; pm 5)
  • Friday 26 September 2014 "Image-based simulation of diffusion and flows within experimental volumetric data sets" Dr Marcus Campbell Bannerman, University of Aberdeen (26)
  • Friday 10 October 2014 Russell Garwood "Open source software for visualising tomographic datasets" (16)
  • Wednesday 26 November 2014. Sam Worthington (Worthington Sharpe Ltd.) Title "Wing: Beyond the mouse". At Daresbury Labs (STFC) A1 Rylands (10)
  • Friday 12 December 2014 - Talk by Prof Sarah Hainsworth, University of Leicester(27+)
  • Thursday 18 December 2014 - Data and Visualisation Needs Survey , Martin Turner, Tim Morris and Ron Fowler (9)
  • Friday 27 February 2015 - Fast X-ray reconstructioon and IMAT framework (18+3+5 - three site meetings)
  • Friday 27 March 2015 - Image Analysis program from NOCTYlab (10)
  • Friday 24 April 2015 - Avizo VR Module Demonstration (7) Extra session on 7 May 2015 (8)
  • Open Day events on 8-11 July 2015, pre-event (6)
  • Seminars alternative to an Away Day up to ToScA in Manchester for 2 September 2015 (27)
  Season 2013-2014: 12 Tomo-Coffee events and one ParaView event; 164 attendees. Meeting List:
Changed:
<
<
  • Pre-meeting to check software suitability on 20 August 2013 (4)
  • Friday 27 September 2013 "Vis Software - Commercial to Open Source" (23)
  • Friday 25 October 2013 volume visualisation with drishti (14)
  • Friday 29 November 2013 "Quantitative Visualisation from the CCPi CCPForge repository: VolView and Avizo" Download modules from: http://ccpforge.cse.rl.ac.uk/gf/project/iqa/frs/ (17)
  • Friday 20 December 2013 Data show and understand session (8)
  • Friday 31 January 2014 NIRFAST (12)
  • Friday 28 February 2014 MANTID (11)
  • Paraview - 19 March 2104 Intro (6)
  • Friday 28 March 2014 LaVision (24)
  • Thursday 8 May 2014 Avizo 8.1 8.01 training course (14)
  • Friday 30 May 2013 Paraview as Volume Visualisation (14)
  • Thursday 26 June 2014 Diamond DAWN system (5) [Friday 25 April Diamond DAWN system (Postponed - 4)]
  • Friday 1 August 2014 Data show and understand session (12, inc demos)
>
>
  • Pre-meeting to check software suitability on 20 August 2013 (4)
  • Friday 27 September 2013 "Vis Software - Commercial to Open Source" (23)
  • Friday 25 October 2013 volume visualisation with drishti (14)
  • Friday 29 November 2013 "Quantitative Visualisation from the CCPi CCPForge repository: VolView and Avizo" Download modules from: http://ccpforge.cse.rl.ac.uk/gf/project/iqa/frs/ (17)
  • Friday 20 December 2013 Data show and understand session (8)
  • Friday 31 January 2014 NIRFAST (12)
  • Friday 28 February 2014 MANTID (11)
  • Paraview - 19 March 2104 Intro (6)
  • Friday 28 March 2014 LaVision (24)
  • Thursday 8 May 2014 Avizo 8.1 8.01 training course (14)
  • Friday 30 May 2013 Paraview as Volume Visualisation (14)
  • Thursday 26 June 2014 Diamond DAWN system (5) [Friday 25 April Diamond DAWN system (Postponed - 4)]
  • Friday 1 August 2014 Data show and understand session (12, inc demos)
  Possible topics:
Changed:
<
<
  • CCPi - Reconstruction techniques
>
>
  • CCPi - Reconstruction techniques
 
  • Facilities available; eg RCaH
  • Conferences and Links eg ToScA
  • Other Segmentation methods and experience
Line: 384 to 382
 Srikanth Nagella (srikanth.nagella@stfc.ac.uk), Ron Fowler (ronald.fowler@stfc.ac.uk) or Martin Turner (martin.turner@stfc.ac.uk)
Changed:
<
<
Paraview and Related Vis Tools Forum – Pre-session held over a lunch at Wednesday 5 March 1pm.
>
>
Paraview and Related Vis Tools Forum – Pre-session held over a lunch at Wednesday 5 March 1pm.
 
Changed:
<
<
Paraview Forum (DL) 19 March 2014, 3pm Paraview and Related Vis Tools Forum – First session at Wednesday 19 March 3pm. Held in DL, and try (visimeet) VC to RAL: Forum for Paraview users – initial round table discussion. There is a growing interest within a diversity of groups within SCD, wider STFC and partner organisations like the VEC, aimed at integrated computation and visualisation processes. A common platform is the ParaView environment http://www.paraview.org/. It is proposed to have a monthly forum to share experiences and practice to help old hands and encourage new novices. The facilities at the Hartree centre, visualisation and compute, are available for certain demonstratable experimentations and already have a range of paraview versions installed in a variety of configurations.
>
>
Paraview Forum (DL) 19 March 2014, 3pm Paraview and Related Vis Tools Forum – First session at Wednesday 19 March 3pm. Held in DL, and try (visimeet) VC to RAL: Forum for Paraview users – initial round table discussion. There is a growing interest within a diversity of groups within SCD, wider STFC and partner organisations like the VEC, aimed at integrated computation and visualisation processes. A common platform is the ParaView environment http://www.paraview.org/. It is proposed to have a monthly forum to share experiences and practice to help old hands and encourage new novices. The facilities at the Hartree centre, visualisation and compute, are available for certain demonstratable experimentations and already have a range of paraview versions installed in a variety of configurations.
  Paraview Forum (DL) 16 April 2014, 3pm _Postponed_
Line: 400 to 398
  SCD Seminar 27 February 2015. 3pm-4pm - "Fast Tomography: From Airport Baggage Scanning to Materials Science" Nicola Wadeson, CCPi Visiting Scientist at Diamond @Room S44 in R89 at RAL and Video conference to Arkwright room in DL. The University of Manchester has recently purchased a Rapiscan RTT x-ray CT Machine, located in the School of Materials' Henry Moseley X-ray Imaging Facility (HMXIF). The RTT110 is capable of producing 3D images in real time, making it the fastest imager in the UK. Currently set-up for airport baggage scanning, we aim to adapt the machine to utilise its potential for a wide range of experiments, such as granular and multi-phase flows using dynamic x-ray CT. This will be at 3pm at Rutherford Appleton Laboratory on the Harwell Campus: in R89/Room S44 and room Arkwright in DL.
Changed:
<
<
... There will also be an update on the ICP (IMAT Computing Project) – IMAT is the first neutron imaging instrument at ISIS; the first of its kind in the world offering unique time-of-flight tomography-driven diffraction techniques; and will link to SCD computational facilities. Lead by Erica Yang http://stfc.ac.uk/SCD/research/data/44593.aspx
>
>
... There will also be an update on the ICP (IMAT Computing Project) – IMAT is the first neutron imaging instrument at ISIS; the first of its kind in the world offering unique time-of-flight tomography-driven diffraction techniques; and will link to SCD computational facilities. Lead by Erica Yang http://stfc.ac.uk/SCD/research/data/44593.aspx
  Related SCD Session: 11am: 13 February 2015 - Talk by Prof. H. Jasak and Dr G. Tabor in Cockcroft Walton Room A DL & VC Link to S48/R89 RAL. 'OpenFOAM and FOAM-Extend: Overview of Capabilities' OpenFOAM® (Open Field Operation and Manipulation) is an open source Computational Fluid Dynamics (CFD) software, which is widely used in both academia and commercial organizations. This seminar will be delivered by two of the most prominent members of the OpenFOAM community in the UK, Prof H. Jasak and Dr G. Tabor. The first part will review the numerical capabilities of OpenFOAM with a particular focus on an enhanced released of the software name FOAM-EXTENDED particularly for multiphase and moving mesh type of calculations. The second part will be devoted to the review of some recent applications performed at the University of Exeter in the field of Suitable Urban Drainage, Tidal renewable energy and compact 3D printed heat exchangers. Some details about Image Base Meshing will be also given. Friday 13 February
Changed:
<
<
Coffee-and-Tomo Session: 3pm-4pm: 10 October 2014 - Talk by Russell Garwood in R89 (S44) Open source software for visualising tomographic datasets: Russell Garwood; University of Manchester. “This talk will provide an overview of free and/or open source software for processing and visualising tomographic datasets. It will be followed by a discussion of other software/tools for performing quantitative analysis of this data. One of the greatest weaknesses of open source packages available - or indeed my knowledge of what's out there - is a lack of free tools for quantifying tomographic data.“ R89/ room S44. If lost or unsure please email: martin.turner@stfc.ac.uk
>
>
Coffee-and-Tomo Session: 3pm-4pm: 10 October 2014 - Talk by Russell Garwood in R89 (S44) Open source software for visualising tomographic datasets: Russell Garwood; University of Manchester. “This talk will provide an overview of free and/or open source software for processing and visualising tomographic datasets. It will be followed by a discussion of other software/tools for performing quantitative analysis of this data. One of the greatest weaknesses of open source packages available - or indeed my knowledge of what's out there - is a lack of free tools for quantifying tomographic data.“ R89/ room S44. If lost or unsure please email: martin.turner@stfc.ac.uk
  3pm, 27 August 2014 SCD Seminar hosted by Tom Keal, CCP5/BioSIM: "Avogadro 2: Scaling to Large Systems, Improving Code Integration and Chemical Data Informatics/Analytics" Location: STFC sites: Arkwright A23 (2nd Floor) DL & VC Link to S44/R89 RAL
Line: 428 to 426
  SCD Interactions with the Harwell Imaging Partnership Mike Curtis-Rouse and Joe Kelleher at RAL will describe some present and some future interactions between the Harwell Imaging Partnership and SCD.
Changed:
<
<
Abstract: The Harwell Imaging Partnership (HIP) was established to promote industrial engagement with STFC large facilities by fostering interactions between industrial researchers, STFC facility scientists and university research groups. In this context, “imaging” includes microscopy, tomography, and ‘functional imaging’, in which properties of complex structures are mapped with high spatial resolution using X-rays, neutrons or lasers. SCD is being considered actively as a ‘facility’ in its own right in this context. A set of case studies based on data transfer, portal interaction, remote access including computation, as well as visualisation specialisms have all been added to the HIP portfolio. This introductory short session will cover some of the opportunities available by working with the HIP as well as future proposed new centre interactions.
>
>
Abstract: The Harwell Imaging Partnership (HIP) was established to promote industrial engagement with STFC large facilities by fostering interactions between industrial researchers, STFC facility scientists and university research groups. In this context, “imaging” includes microscopy, tomography, and ‘functional imaging’, in which properties of complex structures are mapped with high spatial resolution using X-rays, neutrons or lasers. SCD is being considered actively as a ‘facility’ in its own right in this context. A set of case studies based on data transfer, portal interaction, remote access including computation, as well as visualisation specialisms have all been added to the HIP portfolio. This introductory short session will cover some of the opportunities available by working with the HIP as well as future proposed new centre interactions.
  3pm, 10 December 2013 CCP meeting ()
Line: 495 to 494
  Cryo-Ops 2014 held was big success with 93 people viewing- although in three sessions. November 12, 2014
Changed:
<
<
Python Community of practice 2 (PyCoP2) run by CCPi WG member Mark Basham “Community of Practice” event targeting Python which is used widely around the RAL Site; 31 October 2014
>
>
Python Community of practice 2 (PyCoP2) run by CCPi WG member Mark Basham “Community of Practice” event targeting Python which is used widely around the RAL Site; 31 October 2014
  22 October 2014 - Developers' Workshop: CCPi Released a executable based on code from the University of Manchester that uses the iterative CGLS algorithm for image reconstruction from XTek CT systems. The defaults in the interface should provide reasonable initial values. A full resolution reconstruction will use ~128GB and depending on your system can take a few hours per iteration. The project page on CCPForge is http://ccpforge.cse.rl.ac.uk/gf/project/cgls

Introduction to the Software Engineering Support Centre and CCPForge: Tuesday, 7th October 2014. Related to CCPs etc. https://eventbooking.stfc.ac.uk/news-events/introduction-to-the-software-engineering-support-centre-and-ccpforge-230

Changed:
<
<
UoM: HMXIF Courses 8-12 September 2014: Introduction to X-ray Computed Tomography (XCT) and AVIZO standard on the 8th Sept. AVIZO Fire – advanced characterisation of discrete features such as precipitates using AVIZO - 9th Sept. Analysis of interconnected structures such as complex porosity structures using AVIZO, ImageJ and MATLAB - 10th Sept. Image based meshing course – this course will explain how to create a model mesh using ScanIP with volumes generated from AVIZO. These meshes can then be used directly in ABAQUS – 11th Sept. For advanced users, collaborators and industrial partners of the HMXIF only (please contact HMXIF staff for this course) How XCT instruments work: This course will cover the individual components of XCT instruments and their respective capabilities – this is essential to those who want to know how data is generated and affected under different conditions – 12th Sept.
>
>
UoM: HMXIF Courses 8-12 September 2014: Introduction to X-ray Computed Tomography (XCT) and AVIZO standard on the 8th Sept. AVIZO Fire – advanced characterisation of discrete features such as precipitates using AVIZO - 9th Sept. Analysis of interconnected structures such as complex porosity structures using AVIZO, ImageJ and MATLAB - 10th Sept. Image based meshing course – this course will explain how to create a model mesh using ScanIP with volumes generated from AVIZO. These meshes can then be used directly in ABAQUS – 11th Sept. For advanced users, collaborators and industrial partners of the HMXIF only (please contact HMXIF staff for this course) How XCT instruments work: This course will cover the individual components of XCT instruments and their respective capabilities – this is essential to those who want to know how data is generated and affected under different conditions – 12th Sept.
  8 September 2015 Drishti one-day special consultation event
Line: 513 to 512
  Avizo visualisation course at the Diamond House (15), 16-17 July 2014; via the RCaH/Diamond Consortium
Changed:
<
<
11-13 June 2014 MXIF advanced users: How XCT instruments work: This course will cover the individual components of XCT instruments and their respective capabilities – this is essential to those who want to know how data is generated and affected under different conditions – 11 June 2014 Introduction to XCT reconstruction code. This course will explain the various reconstruction codes that are currently being applied to XCT – 12 June 2014 Advanced characterisation techniques: this course will provide the introductory knowledge regarding multi-scale imaging, correlative imaging, phase contrast and time lapse tomography – 13 June 2014
>
>
11-13 June 2014 MXIF advanced users: How XCT instruments work: This course will cover the individual components of XCT instruments and their respective capabilities – this is essential to those who want to know how data is generated and affected under different conditions – 11 June 2014 Introduction to XCT reconstruction code. This course will explain the various reconstruction codes that are currently being applied to XCT – 12 June 2014 Advanced characterisation techniques: this course will provide the introductory knowledge regarding multi-scale imaging, correlative imaging, phase contrast and time lapse tomography – 13 June 2014
 
Changed:
<
<
3-6 June 2014 MXIF introductory courses: Introduction to X-ray Computed Tomography (XCT) and AVIZO standard on the 3 June 2014. AVIZO Fire – advanced characterisation of discrete features such as precipitates using AVIZO - 4 June 2014. Analysis of interconnected structures such as complex porosity structures using AVIZO, ImageJ and MATLAB - 5 June 2014 Image based meshing course – this course will explain how to create a model mesh using ScanIP with volumes generated from AVIZO. These meshes can then be used directly in ABAQUS – 6 June 2014
>
>
3-6 June 2014 MXIF introductory courses: Introduction to X-ray Computed Tomography (XCT) and AVIZO standard on the 3 June 2014. AVIZO Fire – advanced characterisation of discrete features such as precipitates using AVIZO - 4 June 2014. Analysis of interconnected structures such as complex porosity structures using AVIZO, ImageJ and MATLAB - 5 June 2014 Image based meshing course – this course will explain how to create a model mesh using ScanIP with volumes generated from AVIZO. These meshes can then be used directly in ABAQUS – 6 June 2014
  20 May 2014 Developers' day at Birmingham

Revision 18608 Mar 2019 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 10 to 10
  Next Seminar:
Changed:
<
<
12 March 2019 Lunch-and-Learn 12noon in Manchester adn video-conf to RAL
>
>
12 March 2019 Lunch-and-Learn 12noon in Manchester, RAL and video-conf

Please register here: https://forms.office.com/Pages/ResponsePage.aspx?id=HDZmP36oWEGPYZnoLbPKyIoNg6mJSW5Jp6v4v7D_cv9UNFZIOEtCOVdLU0k4T0pCQjBVWTE0MVpCRy4u

  Dan Symes and Ceri Brenner:
Line: 18 to 20
 "Tomographic imaging using intense laser-driven radiation sources": High power lasers (> 100 TW) can be used as the driver for compact light sources that deliver extreme brightness ultrashort x-ray pulses ideally suited for advanced imaging applications. The laser is used to create a cm-scale plasma accelerator generating femtosecond relativistic electron bunches with GeV? energy that can be converted to x-ray beams through a plasma betatron process or bremsstrahlung radiation. This produces up to 1010 photons per pulse in the x-ray region spanning 10 keV up to multi-MeV. The beam is spatially coherent because of the micron-scale source size, enabling phase enhanced imaging to improve contrast between low Z materials with similar density. Using the Gemini laser at RAL we have demonstrated high resolution micro-CT of biological samples and NDE of industrial components. The same laser can generate x-ray energies in the 10’s keV range for soft tissue, low density polymer and composite materials and in the multi-MeV range for penetration of large dense samples such as automotive or aerospace components. Commercialisation of high power laser technology has led to robust, well-characterised systems that are relatively compact and affordable. In the next few years, we expect to develop laser-plasma accelerators as dedicated x-ray machines, capable of micron resolution tomography with high frame rate. This shift from conducting proof-of-principle experiments to operating a synchrotron-style beam brings challenges for our research community – it is necessary for us to build expertise in handling large datasets, image processing, and tomographic reconstruction. We will present the status of CT using laser-driven sources with a view to discussion of how we can engage with the imaging community and what new opportunities may arise for the CCPi network.
Changed:
<
<
dimensional-XCT conference update from Huddersfield, Paul Bills Abstract to come:
>
>
dimensional-XCT conference update from Huddersfield, Paul Bills

A Hartree Perspective: Working with STFC Opportunities - Tim Kirkham (12:45pm)

The Bridging for Innovators https://www.stfc.ac.uk/b4i programme runs across all STFC facilities and gives business the opportunity to work with STFC facilities and Scientists on up to a full funded basis. There is an opportunity to strengthen links between STFC and Universities by businesses linked to Universities working on this programme to combine expertise. Such an opportunity exists potentially at centres such as the Royce, and this talk will give an over view of this opportunity and welcome ideas to stimulate collaboration.

  Introduction new staff and description of ICT'2019, Gemma Fardell
Line: 36 to 44
 
  • Monday 10 June 2019 moved to be next to Fringe event, as major RAL Event on Tuesday 11 June 2019.
  • 14 May 2019 - TBA
  • 9 April 2019 - Visitors from CCPi reconstruction code development teams - Flagship and Core
Changed:
<
<
  • 12 March 2019 Paul Bills - Huddersfield - d-XCT conference; Dan Symes CLF speaker on new Xray Sources; and Gemma Fardell, ICT conference; .... all before
>
>
  • 12 March 2019 Paul Bills - Huddersfield - d-XCT conference; Dan Symes CLF speaker on new Xray Sources; Tom Kirkham STFC connections; and Gemma Fardell, ICT conference; .... all before
 
  • ... Exec Meeting of CCPi held from 1pm
  • 12 February 2019 Session on coatings (thermal, barrier, oxidation and corrosion resistant) Beatriz Mingo "Active Functionalization of ceramic coatings: incorporation of loaded nanotubes" and Nicolas Laugel, "Electrolytic plasma processes for metal surface modification"
  • 15 January 2019 Sarah Fisher - Progress in Laminography and Martin Turner New fast XCT facilities and Applications to the EPSRC Roadmap (att 20)

Revision 18507 Mar 2019 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 10 to 10
  Next Seminar:
Changed:
<
<
12 March 2019 Lunch-and-Learn 12noon in Manchester adn video-conf to RAL
>
>
12 March 2019 Lunch-and-Learn 12noon in Manchester adn video-conf to RAL
  Dan Symes and Ceri Brenner:
Line: 34 to 34
 
  • 9 July 2019 - TBA
  • Monday 10 June 2019 moved to be next to Fringe event, as major RAL Event on Tuesday 11 June 2019.
Changed:
<
<
  • 14 May 2019 Visitors from CCPi reconstruction code development teams - Flagship and Core
  • 9 April 2019 - TBA
  • 12 March 2019 Paul Bills - Huddersfield - d-XCT conference; CLF speaker on new Xray Soures; and Gemma Fardell, ICT conference; .... all before
>
>
  • 14 May 2019 - TBA
  • 9 April 2019 - Visitors from CCPi reconstruction code development teams - Flagship and Core
  • 12 March 2019 Paul Bills - Huddersfield - d-XCT conference; Dan Symes CLF speaker on new Xray Sources; and Gemma Fardell, ICT conference; .... all before
 
  • ... Exec Meeting of CCPi held from 1pm
  • 12 February 2019 Session on coatings (thermal, barrier, oxidation and corrosion resistant) Beatriz Mingo "Active Functionalization of ceramic coatings: incorporation of loaded nanotubes" and Nicolas Laugel, "Electrolytic plasma processes for metal surface modification"
  • 15 January 2019 Sarah Fisher - Progress in Laminography and Martin Turner New fast XCT facilities and Applications to the EPSRC Roadmap (att 20)

Revision 18401 Mar 2019 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 8 to 8
 
  • Lunch and Learn sessions at the University of Manchester MXIF at 12noon with pizza
  • Specialist seminars at locaions including mathematics departments etc...
Added:
>
>
Next Seminar:

12 March 2019 Lunch-and-Learn 12noon in Manchester adn video-conf to RAL

Dan Symes and Ceri Brenner:

"Tomographic imaging using intense laser-driven radiation sources": High power lasers (> 100 TW) can be used as the driver for compact light sources that deliver extreme brightness ultrashort x-ray pulses ideally suited for advanced imaging applications. The laser is used to create a cm-scale plasma accelerator generating femtosecond relativistic electron bunches with GeV? energy that can be converted to x-ray beams through a plasma betatron process or bremsstrahlung radiation. This produces up to 1010 photons per pulse in the x-ray region spanning 10 keV up to multi-MeV. The beam is spatially coherent because of the micron-scale source size, enabling phase enhanced imaging to improve contrast between low Z materials with similar density. Using the Gemini laser at RAL we have demonstrated high resolution micro-CT of biological samples and NDE of industrial components. The same laser can generate x-ray energies in the 10’s keV range for soft tissue, low density polymer and composite materials and in the multi-MeV range for penetration of large dense samples such as automotive or aerospace components. Commercialisation of high power laser technology has led to robust, well-characterised systems that are relatively compact and affordable. In the next few years, we expect to develop laser-plasma accelerators as dedicated x-ray machines, capable of micron resolution tomography with high frame rate. This shift from conducting proof-of-principle experiments to operating a synchrotron-style beam brings challenges for our research community – it is necessary for us to build expertise in handling large datasets, image processing, and tomographic reconstruction. We will present the status of CT using laser-driven sources with a view to discussion of how we can engage with the imaging community and what new opportunities may arise for the CCPi network.

dimensional-XCT conference update from Huddersfield, Paul Bills Abstract to come:

Introduction new staff and description of ICT'2019, Gemma Fardell

...presenting her experiences to data including work at Nikon Metrolgy and plans for the future - also review of iCT ...'very application heavy this year. Every other year it is based in Wels, and ... little more research orientated. The industry talks only take up one morning, and there was a lot of input from research groups around Europe. This year ~350 attendees, so the conference is probably the largest XCT one in Europe - there were a couple of posters on multi-spectral CT, and reconstruction is always a popular topic."

 

Lunch-and-Learn Sessions; often 12 noon - second Tuesday of the Month in Manchester (Royce Institute - Alan Turing Building / PSI)
Line: 15 to 33
 Schedule:

  • 9 July 2019 - TBA
Changed:
<
<
  • Monday 10 June 2019 moved to be next to Fringe event, as major RAL Event on Tuesday 11 June 2019.
>
>
  • Monday 10 June 2019 moved to be next to Fringe event, as major RAL Event on Tuesday 11 June 2019.
 
  • 14 May 2019 Visitors from CCPi reconstruction code development teams - Flagship and Core
  • 9 April 2019 - TBA
  • 12 March 2019 Paul Bills - Huddersfield - d-XCT conference; CLF speaker on new Xray Soures; and Gemma Fardell, ICT conference; .... all before
Line: 73 to 91
 
Exec Meeting and Working Group short presentations:
Changed:
<
<
19 November 2018
>
>
19 November 2018
 
  • Jay Warnett - WMG new facility
  • Bob Cernik - Colour bay facility at University of Manchester
  • Evangelos (Vaggelis) Papoutsellis - Reconstruction software development
Changed:
<
<
2 October 2018
>
>
2 October 2018
 
  • B24 and Process Tomography integration (and future synergistic / rich tomography)
Changed:
<
<
15 May 2018
>
>
15 May 2018
 
  • Chris Race on ML and AI in Materials Science
  • Jakob Jorgensen and Parmesh Gajjar - Laminography reconstruction
  • Alan Kyffin regarding Anvil/repository
  • Brain Bay / Catherine Disney on DVC
Changed:
<
<
29 March 2018
>
>
29 March 2018
 
  • none
Changed:
<
<
15 November 2017
>
>
15 November 2017
 
  • Pre-processing Imaging techniques (Nghia Vo)
  • Thomas Blumensath, Southampton University

Revision 18325 Feb 2019 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 10 to 10
 
Changed:
<
<
Lunch-and-Learn Sessions; often at 12 noon - second Tuesday of the Month in Manchester (Royce Institute - Alan Turing Building / PSI)
>
>
Lunch-and-Learn Sessions; often 12 noon - second Tuesday of the Month in Manchester (Royce Institute - Alan Turing Building / PSI)
  Schedule:
Changed:
<
<
  • 9 July 2019
  • 11 June 2019 possibly move as with RAL Event - NB the Monday 10 June is a Fringe event.
  • 14 May 2019 Visits from CCPi reconstruction code - so Flagship and Core
  • 9 April 2019
>
>
  • 9 July 2019 - TBA
  • Monday 10 June 2019 moved to be next to Fringe event, as major RAL Event on Tuesday 11 June 2019.
  • 14 May 2019 Visitors from CCPi reconstruction code development teams - Flagship and Core
  • 9 April 2019 - TBA
 
  • 12 March 2019 Paul Bills - Huddersfield - d-XCT conference; CLF speaker on new Xray Soures; and Gemma Fardell, ICT conference; .... all before
  • ... Exec Meeting of CCPi held from 1pm
  • 12 February 2019 Session on coatings (thermal, barrier, oxidation and corrosion resistant) Beatriz Mingo "Active Functionalization of ceramic coatings: incorporation of loaded nanotubes" and Nicolas Laugel, "Electrolytic plasma processes for metal surface modification"
Line: 46 to 46
 Proposals:

  • new CCPi Flagship results
Changed:
<
<
  • Phd project pre-results
>
>
  • PhD project pre-results
 
  • ENGINX J Kelleher
  • Jason Wong (plastic surgeon - major trauma) Imaging needs described
  • Invite Phil Childs - to !UoM - stories of measurement standards.
Changed:
<
<
  • CLF at RAL - new proposal
  • ...
>
>
  • ...
 
Extra Specialist Seminars:

8 March 2018 Manchester Inverse Imaging Goup Seminar: Alan Turing Building, Frank Adams 2 at 2pm Prof Bill Lionheart "Histotomography"

Line: 71 to 70
 30 January 2018 (Tuesday) 2pm at AVF in RAL and 1 February 2018 (Thursday) 2pm at Frank Adams 2, Alan Turing Building, University of Manchester. Visiting Flagship speaker: Dr. Joan Duran

18 January 2018 Software show-and-tell for TomViz? (from kitware Inc.) tomography processing and visualisation: moving from electron tomography to XCT and neutron tomography http://www.ccpi.ac.uk/node/363http://www.ccpi.ac.uk/node/363

Added:
>
>
Exec Meeting and Working Group short presentations:

19 November 2018

  • Jay Warnett - WMG new facility
  • Bob Cernik - Colour bay facility at University of Manchester
  • Evangelos (Vaggelis) Papoutsellis - Reconstruction software development

2 October 2018

  • B24 and Process Tomography integration (and future synergistic / rich tomography)

15 May 2018

  • Chris Race on ML and AI in Materials Science
  • Jakob Jorgensen and Parmesh Gajjar - Laminography reconstruction
  • Alan Kyffin regarding Anvil/repository
  • Brain Bay / Catherine Disney on DVC

29 March 2018

  • none

15 November 2017

  • Pre-processing Imaging techniques (Nghia Vo)
  • Thomas Blumensath, Southampton University
  • Paul Quinn – DLS I14 new techniques and Updates
 

SCD Seminars: Raymond Chan, from the Chinese University of Hong Kong 2 November 2017: http://www.math.cuhk.edu.hk/~rchan/ and Jim Nagy, from Emory University in the USA ( 7 December 2017): http://www.mathcs.emory.edu/~nagy/ The seminars will be at 2pm on those respective days. They have been invited to participate in the Isaac Newton programme "Variational methods and effective algorithms for imaging and vision": https://www.newton.ac.uk/event/vmv

Revision 18222 Feb 2019 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 16 to 16
 
  • 9 July 2019
  • 11 June 2019 possibly move as with RAL Event - NB the Monday 10 June is a Fringe event.
Changed:
<
<
  • 14 May 2019
>
>
  • 14 May 2019 Visits from CCPi reconstruction code - so Flagship and Core
 
  • 9 April 2019
  • 12 March 2019 Paul Bills - Huddersfield - d-XCT conference; CLF speaker on new Xray Soures; and Gemma Fardell, ICT conference; .... all before
  • ... Exec Meeting of CCPi held from 1pm

Revision 18120 Feb 2019 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Seminars and vis sessions (http://tinyurl.com/STFCVisSem) across the sites.

Changed:
<
<
  • Tomo-and-Coffee Session: 3D Volume Data Visualisation: Software show-and-tell. Atlas Building - Atlas Visualisation Facility. Scheduled in the Atlas Building at the Harwell campus during sometimes the last Friday of each month from 2pm we have open sessions. Consisting of a short talks/show-and-tells along with opportunity to discuss visualisation needs with your data.
  • Lunch and Learn sessions at the University of Manchester MXIF at 12noon with pizza
  • Specialist seminars at locaions including mathematics departments etc...
>
>
  • Tomo-and-Coffee Session: 3D Volume Data Visualisation: Software show-and-tell. Atlas Building - Atlas Visualisation Facility. Scheduled in the Atlas Building at the Harwell campus during sometimes the last Friday of each month from 2pm we have open sessions. Consisting of a short talks/show-and-tells along with opportunity to discuss visualisation needs with your data.
  • Lunch and Learn sessions at the University of Manchester MXIF at 12noon with pizza
  • Specialist seminars at locaions including mathematics departments etc...
 
Line: 18 to 18
 
  • 11 June 2019 possibly move as with RAL Event - NB the Monday 10 June is a Fringe event.
  • 14 May 2019
  • 9 April 2019
Changed:
<
<
  • 12 March 2019 Paul Bills - Huddersfield - d-XCT plus CLF speaker before Exec meeting of CCPi
>
>
  • 12 March 2019 Paul Bills - Huddersfield - d-XCT conference; CLF speaker on new Xray Soures; and Gemma Fardell, ICT conference; .... all before
  • ... Exec Meeting of CCPi held from 1pm
 
  • 12 February 2019 Session on coatings (thermal, barrier, oxidation and corrosion resistant) Beatriz Mingo "Active Functionalization of ceramic coatings: incorporation of loaded nanotubes" and Nicolas Laugel, "Electrolytic plasma processes for metal surface modification"
  • 15 January 2019 Sarah Fisher - Progress in Laminography and Martin Turner New fast XCT facilities and Applications to the EPSRC Roadmap (att 20)
  • 11 December 2018 Experience from Jake Minns "Neural Networks in Tomography. From basic concepts to experiments on segmentation. A summer student project report" and Nghai Vo "Tomographic data for testing, demonstrating, and developing methods of removing ring artifacts" and "Python implementation of distortion correction methods for X-ray tomography" - https://zenodo.org/communities/ccpi (att 11+2+1)
Line: 53 to 54
 
  • ...
Extra Specialist Seminars:
Changed:
<
<
8 March 2018 Manchester Inverse Imaging Goup Seminar: Alan Turing Building, Frank Adams 2 at 2pm Prof Bill Lionheart "Histotomography"
>
>
8 March 2018 Manchester Inverse Imaging Goup Seminar: Alan Turing Building, Frank Adams 2 at 2pm Prof Bill Lionheart "Histotomography"
 

Revision 18014 Feb 2019 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Seminars and vis sessions (http://tinyurl.com/STFCVisSem) across the sites.

Changed:
<
<
Tomo-and-Coffee Session: 3D Volume Data Visualisation: Software show-and-tell. Atlas Building - Atlas Visualisation Facility. Scheduled in the Atlas Building at the Harwell campus during sometimes the last Friday of each month from 2pm we have open sessions. Consisting of a short talks/show-and-tells along with opportunity to discuss visualisation needs with your data.

Lunch and Learn sessions at the University of Manchester MXIF at 12noon with pizza

>
>
  • Tomo-and-Coffee Session: 3D Volume Data Visualisation: Software show-and-tell. Atlas Building - Atlas Visualisation Facility. Scheduled in the Atlas Building at the Harwell campus during sometimes the last Friday of each month from 2pm we have open sessions. Consisting of a short talks/show-and-tells along with opportunity to discuss visualisation needs with your data.
  • Lunch and Learn sessions at the University of Manchester MXIF at 12noon with pizza
  • Specialist seminars at locaions including mathematics departments etc...
 
Line: 51 to 51
 
  • Invite Phil Childs - to !UoM - stories of measurement standards.
  • CLF at RAL - new proposal
  • ...
Added:
>
>
Extra Specialist Seminars:

8 March 2018 Manchester Inverse Imaging Goup Seminar: Alan Turing Building, Frank Adams 2 at 2pm Prof Bill Lionheart "Histotomography"

 
Changed:
<
<
SCD based Seminars:
>
>
SCD (STFC) based Seminars:

6 July 2018 9:30am pre-coffee talk - Remote Visualisation and Analysis of Tomographic Data - Providing Near Data Analysis Environments and Visualisation for Diamond Data; Richard Smith at RAL and DL campuses

4 July 2018 Seminar on Digital Volume Correlation by Prof. Brian Bay (Oregon State University). Abstract: Digital Volume Correlation (DVC)

  17 May 2018, 10am-12noon Avizo hands-on session with FEI at RAL. Introductory to Avizo software, pipeline and then running a simple segmentation and video production.
Added:
>
>
8 February 2018 SCD Seminar "Geometric Measures of Isocontour Regions" Hamish Carr University of Leeds https://www.ccpi.ac.uk/node/381https://www.ccpi.ac.uk/node/381

30 January 2018 (Tuesday) 2pm at AVF in RAL and 1 February 2018 (Thursday) 2pm at Frank Adams 2, Alan Turing Building, University of Manchester. Visiting Flagship speaker: Dr. Joan Duran

18 January 2018 Software show-and-tell for TomViz? (from kitware Inc.) tomography processing and visualisation: moving from electron tomography to XCT and neutron tomography http://www.ccpi.ac.uk/node/363http://www.ccpi.ac.uk/node/363

 

SCD Seminars: Raymond Chan, from the Chinese University of Hong Kong 2 November 2017: http://www.math.cuhk.edu.hk/~rchan/ and Jim Nagy, from Emory University in the USA ( 7 December 2017): http://www.mathcs.emory.edu/~nagy/ The seminars will be at 2pm on those respective days. They have been invited to participate in the Isaac Newton programme "Variational methods and effective algorithms for imaging and vision": https://www.newton.ac.uk/event/vmv


Changed:
<
<
Visit from ThermoFisher FEI Software Group: 2 & 3 October 2017, at The Research Complex at Harwell. "Correlative & multimodal data acquisition, analysis and modelling" Contact Robert Atwood to arrange a meeting (robert.atwood@diamond.ac.uk). 2 October 2017, 2pm
>
>
Visit from ThermoFisher FEI Software Group: 2 & 3 October 2017, at The Research Complex at Harwell. "Correlative & multimodal data acquisition, analysis and modelling" Contact Robert Atwood to arrange a meeting (robert.atwood@diamond.ac.uk). 2 October 2017, 2pm
 

SCD Seminar at 2pm, 11 September 2017: https://www.ccpi.ac.uk/node/306 RSE UK-USA Exchange; Marcus Hanwell from Kitware has been awarded an EPSRC grant to exchange information across related RSE groups in 3D tomographic visualisation and processing.

Revision 17907 Feb 2019 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 15 to 15
 Schedule:

  • 9 July 2019
Changed:
<
<
  • 11 June 2019 possibly move as with RAL Event - NB the Monday 10 June is a Fringe event.
>
>
  • 11 June 2019 possibly move as with RAL Event - NB the Monday 10 June is a Fringe event.
 
  • 14 May 2019
  • 9 April 2019
  • 12 March 2019 Paul Bills - Huddersfield - d-XCT plus CLF speaker before Exec meeting of CCPi
Changed:
<
<
  • 12 February 2019 Session on coatings (thermal, barrier, oxidation and corrosion resistant) Beatriz Mingo "Active Functionalization of ceramic coatings: incorporation of loaded nanotubes" and Nicolas Laurel, "Electrolytic plasma processes for metal surface modification"
>
>
  • 12 February 2019 Session on coatings (thermal, barrier, oxidation and corrosion resistant) Beatriz Mingo "Active Functionalization of ceramic coatings: incorporation of loaded nanotubes" and Nicolas Laugel, "Electrolytic plasma processes for metal surface modification"
 
  • 15 January 2019 Sarah Fisher - Progress in Laminography and Martin Turner New fast XCT facilities and Applications to the EPSRC Roadmap (att 20)
  • 11 December 2018 Experience from Jake Minns "Neural Networks in Tomography. From basic concepts to experiments on segmentation. A summer student project report" and Nghai Vo "Tomographic data for testing, demonstrating, and developing methods of removing ring artifacts" and "Python implementation of distortion correction methods for X-ray tomography" - https://zenodo.org/communities/ccpi (att 11+2+1)
  • "extra" informal session: 2:30pm Wednesday 5 December 2018 Julia Brettschneider and Wilfrid Kendall (Warwick University) "Investigating industrial CT scanner damage project with ATI" host Tristan Lowe (att 5)

Revision 17830 Jan 2019 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 15 to 15
 Schedule:

  • 9 July 2019
Changed:
<
<
  • 11 June 2019 merge with Fringe Event - joint pizza is a possibility
>
>
  • 11 June 2019 possibly move as with RAL Event - NB the Monday 10 June is a Fringe event.
 
  • 14 May 2019
  • 9 April 2019
  • 12 March 2019 Paul Bills - Huddersfield - d-XCT plus CLF speaker before Exec meeting of CCPi
Changed:
<
<
  • 12 February 2019 Session on coatings (thermal, barrier, oxidation and corrosion resistant) Beatriz Mingo "Active Functionalization of ceramic coatings: incorporation of loaded nanotubes" and Nicolas Laurel, "Electrolytic plasma processes for metal surface modification"
>
>
  • 12 February 2019 Session on coatings (thermal, barrier, oxidation and corrosion resistant) Beatriz Mingo "Active Functionalization of ceramic coatings: incorporation of loaded nanotubes" and Nicolas Laurel, "Electrolytic plasma processes for metal surface modification"
 
  • 15 January 2019 Sarah Fisher - Progress in Laminography and Martin Turner New fast XCT facilities and Applications to the EPSRC Roadmap (att 20)
  • 11 December 2018 Experience from Jake Minns "Neural Networks in Tomography. From basic concepts to experiments on segmentation. A summer student project report" and Nghai Vo "Tomographic data for testing, demonstrating, and developing methods of removing ring artifacts" and "Python implementation of distortion correction methods for X-ray tomography" - https://zenodo.org/communities/ccpi (att 11+2+1)
  • "extra" informal session: 2:30pm Wednesday 5 December 2018 Julia Brettschneider and Wilfrid Kendall (Warwick University) "Investigating industrial CT scanner damage project with ATI" host Tristan Lowe (att 5)

Revision 17728 Jan 2019 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 19 to 19
 
  • 14 May 2019
  • 9 April 2019
  • 12 March 2019 Paul Bills - Huddersfield - d-XCT plus CLF speaker before Exec meeting of CCPi
Changed:
<
<
  • 12 February 2019 Beatriz Mingo "Active Functionalization of ceramic coatings: incorporation of loaded nanotubes" session on coatings (thermal, barrier, oxidation and corrosion resistant) Nicolas Laurel, talk about surface treatments based on electrolytic plasma processes (EPP)
>
>
  • 12 February 2019 Session on coatings (thermal, barrier, oxidation and corrosion resistant) Beatriz Mingo "Active Functionalization of ceramic coatings: incorporation of loaded nanotubes" and Nicolas Laurel, "Electrolytic plasma processes for metal surface modification"
 
  • 15 January 2019 Sarah Fisher - Progress in Laminography and Martin Turner New fast XCT facilities and Applications to the EPSRC Roadmap (att 20)
  • 11 December 2018 Experience from Jake Minns "Neural Networks in Tomography. From basic concepts to experiments on segmentation. A summer student project report" and Nghai Vo "Tomographic data for testing, demonstrating, and developing methods of removing ring artifacts" and "Python implementation of distortion correction methods for X-ray tomography" - https://zenodo.org/communities/ccpi (att 11+2+1)
  • "extra" informal session: 2:30pm Wednesday 5 December 2018 Julia Brettschneider and Wilfrid Kendall (Warwick University) "Investigating industrial CT scanner damage project with ATI" host Tristan Lowe (att 5)

Revision 17617 Jan 2019 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 19 to 19
 
  • 14 May 2019
  • 9 April 2019
  • 12 March 2019 Paul Bills - Huddersfield - d-XCT plus CLF speaker before Exec meeting of CCPi
Changed:
<
<
  • 12 February 2019 Beatriz Mingo "Active Functionalization of ceramic coatings: incorporation of loaded nanotubes" session on coatings (thermal, barrier, oxidation and corrosion resistant) Also invite wider coatings community to talk
>
>
  • 12 February 2019 Beatriz Mingo "Active Functionalization of ceramic coatings: incorporation of loaded nanotubes" session on coatings (thermal, barrier, oxidation and corrosion resistant) Nicolas Laurel, talk about surface treatments based on electrolytic plasma processes (EPP)
 
  • 15 January 2019 Sarah Fisher - Progress in Laminography and Martin Turner New fast XCT facilities and Applications to the EPSRC Roadmap (att 20)
  • 11 December 2018 Experience from Jake Minns "Neural Networks in Tomography. From basic concepts to experiments on segmentation. A summer student project report" and Nghai Vo "Tomographic data for testing, demonstrating, and developing methods of removing ring artifacts" and "Python implementation of distortion correction methods for X-ray tomography" - https://zenodo.org/communities/ccpi (att 11+2+1)
  • "extra" informal session: 2:30pm Wednesday 5 December 2018 Julia Brettschneider and Wilfrid Kendall (Warwick University) "Investigating industrial CT scanner damage project with ATI" host Tristan Lowe (att 5)

Revision 17516 Jan 2019 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 18 to 18
 
  • 11 June 2019 merge with Fringe Event - joint pizza is a possibility
  • 14 May 2019
  • 9 April 2019
Changed:
<
<
  • 12 March 2019 Paul Bills - Huddersfield - d-XCT plus admin speaker
>
>
  • 12 March 2019 Paul Bills - Huddersfield - d-XCT plus CLF speaker before Exec meeting of CCPi
 
  • 12 February 2019 Beatriz Mingo "Active Functionalization of ceramic coatings: incorporation of loaded nanotubes" session on coatings (thermal, barrier, oxidation and corrosion resistant) Also invite wider coatings community to talk
  • 15 January 2019 Sarah Fisher - Progress in Laminography and Martin Turner New fast XCT facilities and Applications to the EPSRC Roadmap (att 20)
  • 11 December 2018 Experience from Jake Minns "Neural Networks in Tomography. From basic concepts to experiments on segmentation. A summer student project report" and Nghai Vo "Tomographic data for testing, demonstrating, and developing methods of removing ring artifacts" and "Python implementation of distortion correction methods for X-ray tomography" - https://zenodo.org/communities/ccpi (att 11+2+1)

Revision 17415 Jan 2019 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 18 to 18
 
  • 11 June 2019 merge with Fringe Event - joint pizza is a possibility
  • 14 May 2019
  • 9 April 2019
Changed:
<
<
  • 12 March 2019 Paul Bills - Huddersfield - d-XCT plus admin speaker?
  • 12 February 2019 Beatriz Mingo "Active Functionalization of ceramic coatings: incorporation of loaded nanotubes" session on coatings (thermal, barrier, oxidation and corrosion resistant) Also invite wider coatings community to talk
  • 15 January 2019 Sarah Fisher - Progress in Laminography and Martin Turner New fast XCT facilities and Applications o the EPSRC Roadmap
>
>
  • 12 March 2019 Paul Bills - Huddersfield - d-XCT plus admin speaker
  • 12 February 2019 Beatriz Mingo "Active Functionalization of ceramic coatings: incorporation of loaded nanotubes" session on coatings (thermal, barrier, oxidation and corrosion resistant) Also invite wider coatings community to talk
  • 15 January 2019 Sarah Fisher - Progress in Laminography and Martin Turner New fast XCT facilities and Applications to the EPSRC Roadmap (att 20)
 
  • 11 December 2018 Experience from Jake Minns "Neural Networks in Tomography. From basic concepts to experiments on segmentation. A summer student project report" and Nghai Vo "Tomographic data for testing, demonstrating, and developing methods of removing ring artifacts" and "Python implementation of distortion correction methods for X-ray tomography" - https://zenodo.org/communities/ccpi (att 11+2+1)
  • "extra" informal session: 2:30pm Wednesday 5 December 2018 Julia Brettschneider and Wilfrid Kendall (Warwick University) "Investigating industrial CT scanner damage project with ATI" host Tristan Lowe (att 5)
  • 13 November 2018 !ToScA (and other events); Chakri Gudla "Multiscale correlative characterization of environmentally assisted crack initiation, propagation and failure in a high strength aa5083 h131 alloy" and Sam Johnston "Non destructive 3D grain imaging in aeroengine materials by diffraction contrast tomography" (att 23)

Revision 17315 Jan 2019 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 19 to 19
 
  • 14 May 2019
  • 9 April 2019
  • 12 March 2019 Paul Bills - Huddersfield - d-XCT plus admin speaker?
Changed:
<
<
  • 12 February 2019 Beatriz Mingo session on coatings (thermal, barrier, oxidation and corrosion resistant) Also invite wider coatings community to talk
>
>
  • 12 February 2019 Beatriz Mingo "Active Functionalization of ceramic coatings: incorporation of loaded nanotubes" session on coatings (thermal, barrier, oxidation and corrosion resistant) Also invite wider coatings community to talk
 
  • 15 January 2019 Sarah Fisher - Progress in Laminography and Martin Turner New fast XCT facilities and Applications o the EPSRC Roadmap
  • 11 December 2018 Experience from Jake Minns "Neural Networks in Tomography. From basic concepts to experiments on segmentation. A summer student project report" and Nghai Vo "Tomographic data for testing, demonstrating, and developing methods of removing ring artifacts" and "Python implementation of distortion correction methods for X-ray tomography" - https://zenodo.org/communities/ccpi (att 11+2+1)
  • "extra" informal session: 2:30pm Wednesday 5 December 2018 Julia Brettschneider and Wilfrid Kendall (Warwick University) "Investigating industrial CT scanner damage project with ATI" host Tristan Lowe (att 5)

Revision 17209 Jan 2019 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 10 to 10
 
Changed:
<
<
Lunch-and-Learn Sessions; often at 12 noon - second Tuesday of the Month in Manchester
>
>
Lunch-and-Learn Sessions; often at 12 noon - second Tuesday of the Month in Manchester (Royce Institute - Alan Turing Building / PSI)
  Schedule:
Line: 19 to 19
 
  • 14 May 2019
  • 9 April 2019
  • 12 March 2019 Paul Bills - Huddersfield - d-XCT plus admin speaker?
Changed:
<
<
  • 12 February 2019 (provisional) Beatriz Mingo Suggested session on coatings (thermal, barrier, oxidation and corrosion resistant) Also invite wider coatings community to talk
>
>
  • 12 February 2019 Beatriz Mingo session on coatings (thermal, barrier, oxidation and corrosion resistant) Also invite wider coatings community to talk
 
  • 15 January 2019 Sarah Fisher - Progress in Laminography and Martin Turner New fast XCT facilities and Applications o the EPSRC Roadmap
  • 11 December 2018 Experience from Jake Minns "Neural Networks in Tomography. From basic concepts to experiments on segmentation. A summer student project report" and Nghai Vo "Tomographic data for testing, demonstrating, and developing methods of removing ring artifacts" and "Python implementation of distortion correction methods for X-ray tomography" - https://zenodo.org/communities/ccpi (att 11+2+1)
  • "extra" informal session: 2:30pm Wednesday 5 December 2018 Julia Brettschneider and Wilfrid Kendall (Warwick University) "Investigating industrial CT scanner damage project with ATI" host Tristan Lowe (att 5)

Revision 17108 Jan 2019 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 6 to 6
  Tomo-and-Coffee Session: 3D Volume Data Visualisation: Software show-and-tell. Atlas Building - Atlas Visualisation Facility. Scheduled in the Atlas Building at the Harwell campus during sometimes the last Friday of each month from 2pm we have open sessions. Consisting of a short talks/show-and-tells along with opportunity to discuss visualisation needs with your data.
Changed:
<
<
Lunch and Learn sessions at Manchester MXIF at 12noon with pizza

Directions: Google Maps to the Atlas Visualisation Facility: https://mapsengine.google.com/map/edit?mid=zkkpP5ii84bY.krIHgGkZaXa4

>
>
Lunch and Learn sessions at the University of Manchester MXIF at 12noon with pizza
 

Lunch-and-Learn Sessions; often at 12 noon - second Tuesday of the Month in Manchester
Deleted:
<
<
Proposals for 2018-2019 from October 2018:

  • new CCPi Flagship results
  • ENGINX
  • Sarah Fisher@UoM - Jan
  • Jason Wong (plastic surgeon - major trauma) Imaging needs described
  • dXCT 2019 from Huddersfield Paul Bills
  • Invite Phil Childs - to UoM - stories of measurement standards.
  • ...
 Schedule:

  • 9 July 2019
  • 11 June 2019 merge with Fringe Event - joint pizza is a possibility
  • 14 May 2019
  • 9 April 2019
Changed:
<
<
  • 12 March 2019 Paul Bills - Huddersfield - d-XCT
>
>
  • 12 March 2019 Paul Bills - Huddersfield - d-XCT plus admin speaker?
 
  • 12 February 2019 (provisional) Beatriz Mingo Suggested session on coatings (thermal, barrier, oxidation and corrosion resistant) Also invite wider coatings community to talk
Changed:
<
<
  • 15 January 2019 Sarah Fisher- Laminography
>
>
  • 15 January 2019 Sarah Fisher - Progress in Laminography and Martin Turner New fast XCT facilities and Applications o the EPSRC Roadmap
 
  • 11 December 2018 Experience from Jake Minns "Neural Networks in Tomography. From basic concepts to experiments on segmentation. A summer student project report" and Nghai Vo "Tomographic data for testing, demonstrating, and developing methods of removing ring artifacts" and "Python implementation of distortion correction methods for X-ray tomography" - https://zenodo.org/communities/ccpi (att 11+2+1)
Changed:
<
<
  • "extra" informal session: 2:30pm Wednesday 5 December 2018 Julia Brettschneider and Wilfrid Kendall (Warwick University) "Investigating industrial CT scanner damage project with ATI" host Tristan Lowe (att 5)
>
>
  • "extra" informal session: 2:30pm Wednesday 5 December 2018 Julia Brettschneider and Wilfrid Kendall (Warwick University) "Investigating industrial CT scanner damage project with ATI" host Tristan Lowe (att 5)
 
  • 13 November 2018 !ToScA (and other events); Chakri Gudla "Multiscale correlative characterization of environmentally assisted crack initiation, propagation and failure in a high strength aa5083 h131 alloy" and Sam Johnston "Non destructive 3D grain imaging in aeroengine materials by diffraction contrast tomography" (att 23)
  • 2 October 2018 Brian Bay "DVC" and Daniil Kazantzev "Tomophantom package" - at RAL v-conf to Manchester (att 28+6)
  • 10 July 2018 ICAL Russell Garwood ; and new (scalable) reconstruction package from the MTC Nick Brierley (att 22)
Line: 54 to 42
 
  • 1 May 2015 - Bill Lionheart will talk about Fast Tomography: From Airport Baggage Scanning to Materials Science.
  • 27 February 2015 - Martin Turner “Visualisation Matters - the need to put the human back in the imaging-capture-and-computational loop: case studies from work with the CCPi (http://www.ccpi.ac.uk/) and Harwell Imaging Partnership as well as future opportunities for collaboration and resource"
Added:
>
>
Proposals:

  • new CCPi Flagship results
  • Phd project pre-results
  • ENGINX J Kelleher
  • Jason Wong (plastic surgeon - major trauma) Imaging needs described
  • Invite Phil Childs - to !UoM - stories of measurement standards.
  • CLF at RAL - new proposal
  • ...
 

SCD based Seminars:

Revision 17019 Dec 2018 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 32 to 32
 
  • 9 April 2019
  • 12 March 2019 Paul Bills - Huddersfield - d-XCT
  • 12 February 2019 (provisional) Beatriz Mingo Suggested session on coatings (thermal, barrier, oxidation and corrosion resistant) Also invite wider coatings community to talk
Changed:
<
<
  • 15 January 2019 (provisional) Sarah Fisher and Parmesh Gajjatr - Laminography
>
>
  • 15 January 2019 Sarah Fisher- Laminography
 
  • 11 December 2018 Experience from Jake Minns "Neural Networks in Tomography. From basic concepts to experiments on segmentation. A summer student project report" and Nghai Vo "Tomographic data for testing, demonstrating, and developing methods of removing ring artifacts" and "Python implementation of distortion correction methods for X-ray tomography" - https://zenodo.org/communities/ccpi (att 11+2+1)
  • "extra" informal session: 2:30pm Wednesday 5 December 2018 Julia Brettschneider and Wilfrid Kendall (Warwick University) "Investigating industrial CT scanner damage project with ATI" host Tristan Lowe (att 5)
  • 13 November 2018 !ToScA (and other events); Chakri Gudla "Multiscale correlative characterization of environmentally assisted crack initiation, propagation and failure in a high strength aa5083 h131 alloy" and Sam Johnston "Non destructive 3D grain imaging in aeroengine materials by diffraction contrast tomography" (att 23)

Revision 16912 Dec 2018 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 20 to 20
 
  • ENGINX
  • Sarah Fisher@UoM - Jan
  • Jason Wong (plastic surgeon - major trauma) Imaging needs described
Changed:
<
<
  • dXCT 2019 from Huddersfield
>
>
  • dXCT 2019 from Huddersfield Paul Bills
  • Invite Phil Childs - to UoM - stories of measurement standards.
 
  • ...

Schedule:

Line: 29 to 30
 
  • 11 June 2019 merge with Fringe Event - joint pizza is a possibility
  • 14 May 2019
  • 9 April 2019
Changed:
<
<
  • 12 March 2019 You Could be Here!!
>
>
  • 12 March 2019 Paul Bills - Huddersfield - d-XCT
 
  • 12 February 2019 (provisional) Beatriz Mingo Suggested session on coatings (thermal, barrier, oxidation and corrosion resistant) Also invite wider coatings community to talk
  • 15 January 2019 (provisional) Sarah Fisher and Parmesh Gajjatr - Laminography
  • 11 December 2018 Experience from Jake Minns "Neural Networks in Tomography. From basic concepts to experiments on segmentation. A summer student project report" and Nghai Vo "Tomographic data for testing, demonstrating, and developing methods of removing ring artifacts" and "Python implementation of distortion correction methods for X-ray tomography" - https://zenodo.org/communities/ccpi (att 11+2+1)

Revision 16812 Dec 2018 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 6 to 6
  Tomo-and-Coffee Session: 3D Volume Data Visualisation: Software show-and-tell. Atlas Building - Atlas Visualisation Facility. Scheduled in the Atlas Building at the Harwell campus during sometimes the last Friday of each month from 2pm we have open sessions. Consisting of a short talks/show-and-tells along with opportunity to discuss visualisation needs with your data.
Changed:
<
<
Lunch and Learn sessions at Manchester MXIF at 12non with pizza
>
>
Lunch and Learn sessions at Manchester MXIF at 12noon with pizza
  Directions: Google Maps to the Atlas Visualisation Facility: https://mapsengine.google.com/map/edit?mid=zkkpP5ii84bY.krIHgGkZaXa4
Line: 29 to 29
 
  • 11 June 2019 merge with Fringe Event - joint pizza is a possibility
  • 14 May 2019
  • 9 April 2019
Changed:
<
<
  • 12 March 2019
>
>
  • 12 March 2019 You Could be Here!!
 
  • 12 February 2019 (provisional) Beatriz Mingo Suggested session on coatings (thermal, barrier, oxidation and corrosion resistant) Also invite wider coatings community to talk
  • 15 January 2019 (provisional) Sarah Fisher and Parmesh Gajjatr - Laminography
Changed:
<
<
  • 11 December 2018 Experience from two Summer students on ML and Nghai Vo "Tomographic data for testing, demonstrating, and developing methods of removing ring artifacts" and "Python implementation of distortion correction methods for X-ray tomography" - https://zenodo.org/communities/ccpi
>
>
  • 11 December 2018 Experience from Jake Minns "Neural Networks in Tomography. From basic concepts to experiments on segmentation. A summer student project report" and Nghai Vo "Tomographic data for testing, demonstrating, and developing methods of removing ring artifacts" and "Python implementation of distortion correction methods for X-ray tomography" - https://zenodo.org/communities/ccpi (att 11+2+1)
 
  • "extra" informal session: 2:30pm Wednesday 5 December 2018 Julia Brettschneider and Wilfrid Kendall (Warwick University) "Investigating industrial CT scanner damage project with ATI" host Tristan Lowe (att 5)
  • 13 November 2018 !ToScA (and other events); Chakri Gudla "Multiscale correlative characterization of environmentally assisted crack initiation, propagation and failure in a high strength aa5083 h131 alloy" and Sam Johnston "Non destructive 3D grain imaging in aeroengine materials by diffraction contrast tomography" (att 23)
  • 2 October 2018 Brian Bay "DVC" and Daniil Kazantzev "Tomophantom package" - at RAL v-conf to Manchester (att 28+6)

Revision 16707 Dec 2018 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 17 to 17
 Proposals for 2018-2019 from October 2018:

  • new CCPi Flagship results
Changed:
<
<
  • ATI project Wilfrid Kendall and Julia Brettschneider (Warwick)
  • ML seminars from students at RAL
  • ENGINX
>
>
  • ENGINX
 
  • Sarah Fisher@UoM - Jan
  • Jason Wong (plastic surgeon - major trauma) Imaging needs described
  • dXCT 2019 from Huddersfield
Line: 28 to 26
 Schedule:

  • 9 July 2019
Changed:
<
<
  • 11 June 2019 merge with Fringe Event - join pizza is a possibility
>
>
  • 11 June 2019 merge with Fringe Event - joint pizza is a possibility
 
  • 14 May 2019
  • 9 April 2019
  • 12 March 2019
  • 12 February 2019 (provisional) Beatriz Mingo Suggested session on coatings (thermal, barrier, oxidation and corrosion resistant) Also invite wider coatings community to talk
  • 15 January 2019 (provisional) Sarah Fisher and Parmesh Gajjatr - Laminography
  • 11 December 2018 Experience from two Summer students on ML and Nghai Vo "Tomographic data for testing, demonstrating, and developing methods of removing ring artifacts" and "Python implementation of distortion correction methods for X-ray tomography" - https://zenodo.org/communities/ccpi
Changed:
<
<
  • "extra" informal session: 2:30pm Wednesday 5 December 2018 Julia Brettschneider and Wilfrid Kendall (Warwick University) "Investigating industrial CT scanner damage project with ATI" host Tristan Lowe
>
>
  • "extra" informal session: 2:30pm Wednesday 5 December 2018 Julia Brettschneider and Wilfrid Kendall (Warwick University) "Investigating industrial CT scanner damage project with ATI" host Tristan Lowe (att 5)
 
  • 13 November 2018 !ToScA (and other events); Chakri Gudla "Multiscale correlative characterization of environmentally assisted crack initiation, propagation and failure in a high strength aa5083 h131 alloy" and Sam Johnston "Non destructive 3D grain imaging in aeroengine materials by diffraction contrast tomography" (att 23)
  • 2 October 2018 Brian Bay "DVC" and Daniil Kazantzev "Tomophantom package" - at RAL v-conf to Manchester (att 28+6)
  • 10 July 2018 ICAL Russell Garwood ; and new (scalable) reconstruction package from the MTC Nick Brierley (att 22)

Revision 16629 Nov 2018 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 22 to 22
 
  • ENGINX
  • Sarah Fisher@UoM - Jan
  • Jason Wong (plastic surgeon - major trauma) Imaging needs described
Added:
>
>
  • dXCT 2019 from Huddersfield
 
  • ...

Schedule:

Line: 30 to 31
 
  • 11 June 2019 merge with Fringe Event - join pizza is a possibility
  • 14 May 2019
  • 9 April 2019
Changed:
<
<
  • 12 March 2019 dXCT 2019 from Huddersfield
>
>
  • 12 March 2019
 
  • 12 February 2019 (provisional) Beatriz Mingo Suggested session on coatings (thermal, barrier, oxidation and corrosion resistant) Also invite wider coatings community to talk
  • 15 January 2019 (provisional) Sarah Fisher and Parmesh Gajjatr - Laminography
  • 11 December 2018 Experience from two Summer students on ML and Nghai Vo "Tomographic data for testing, demonstrating, and developing methods of removing ring artifacts" and "Python implementation of distortion correction methods for X-ray tomography" - https://zenodo.org/communities/ccpi
Changed:
<
<
  • "extra" informal session: 2:30pm Wednesday 5 December 2018 Julia Brettschneider and Wilfrid Kendall (Warwick University) "Investigating industrial CT scanner damage project with ATI" host Tristan Lowe
>
>
  • "extra" informal session: 2:30pm Wednesday 5 December 2018 Julia Brettschneider and Wilfrid Kendall (Warwick University) "Investigating industrial CT scanner damage project with ATI" host Tristan Lowe
 
  • 13 November 2018 !ToScA (and other events); Chakri Gudla "Multiscale correlative characterization of environmentally assisted crack initiation, propagation and failure in a high strength aa5083 h131 alloy" and Sam Johnston "Non destructive 3D grain imaging in aeroengine materials by diffraction contrast tomography" (att 23)
  • 2 October 2018 Brian Bay "DVC" and Daniil Kazantzev "Tomophantom package" - at RAL v-conf to Manchester (att 28+6)
  • 10 July 2018 ICAL Russell Garwood ; and new (scalable) reconstruction package from the MTC Nick Brierley (att 22)

Revision 16528 Nov 2018 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 34 to 34
 
  • 12 February 2019 (provisional) Beatriz Mingo Suggested session on coatings (thermal, barrier, oxidation and corrosion resistant) Also invite wider coatings community to talk
  • 15 January 2019 (provisional) Sarah Fisher and Parmesh Gajjatr - Laminography
  • 11 December 2018 Experience from two Summer students on ML and Nghai Vo "Tomographic data for testing, demonstrating, and developing methods of removing ring artifacts" and "Python implementation of distortion correction methods for X-ray tomography" - https://zenodo.org/communities/ccpi
Changed:
<
<
  • 13 November 2018 ToScA (and other events); Chakri Gudla "Multiscale correlative characterization of environmentally assisted crack initiation, propagation and failure in a high strength aa5083 h131 alloy" and Sam Johnston "Non destructive 3D grain imaging in aeroengine materials by diffraction contrast tomography" (att 23)
>
>
  • "extra" informal session: 2:30pm Wednesday 5 December 2018 Julia Brettschneider and Wilfrid Kendall (Warwick University) "Investigating industrial CT scanner damage project with ATI" host Tristan Lowe
  • 13 November 2018 !ToScA (and other events); Chakri Gudla "Multiscale correlative characterization of environmentally assisted crack initiation, propagation and failure in a high strength aa5083 h131 alloy" and Sam Johnston "Non destructive 3D grain imaging in aeroengine materials by diffraction contrast tomography" (att 23)
 
  • 2 October 2018 Brian Bay "DVC" and Daniil Kazantzev "Tomophantom package" - at RAL v-conf to Manchester (att 28+6)
  • 10 July 2018 ICAL Russell Garwood ; and new (scalable) reconstruction package from the MTC Nick Brierley (att 22)
  • 12 June 2018 Jakob Jorgensen and Parmesh Gajjar "Advancing automated temporal-CT capabilities of laboratory μXCT machines" (att 11)

Revision 16427 Nov 2018 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 20 to 20
 
  • ATI project Wilfrid Kendall and Julia Brettschneider (Warwick)
  • ML seminars from students at RAL
  • ENGINX
Added:
>
>
  • Sarah Fisher@UoM - Jan
  • Jason Wong (plastic surgeon - major trauma) Imaging needs described
 
  • ...

Schedule:

  • 9 July 2019
Changed:
<
<
  • 11 June 2019 clash with Fringe
>
>
  • 11 June 2019 merge with Fringe Event - join pizza is a possibility
 
  • 14 May 2019
  • 9 April 2019
Changed:
<
<
  • 12 March 2019
>
>
  • 12 March 2019 dXCT 2019 from Huddersfield
 
  • 12 February 2019 (provisional) Beatriz Mingo Suggested session on coatings (thermal, barrier, oxidation and corrosion resistant) Also invite wider coatings community to talk
Changed:
<
<
  • 15 January 2019 (provisional) Sarah Fisher and Parmesh Gajjatr - laminography
>
>
  • 15 January 2019 (provisional) Sarah Fisher and Parmesh Gajjatr - Laminography
 
  • 11 December 2018 Experience from two Summer students on ML and Nghai Vo "Tomographic data for testing, demonstrating, and developing methods of removing ring artifacts" and "Python implementation of distortion correction methods for X-ray tomography" - https://zenodo.org/communities/ccpi
Changed:
<
<
  • 13 November 2018 ToScA (and other events); Chakri Gudla "Multiscale correlative characterization of environmentally assisted crack initiation, propagation and failure in a high strength aa5083 h131 alloy" and Sam Johnston "Non destructive 3D grain imaging in aeroengine materials by diffraction contrast tomography"
>
>
  • 13 November 2018 ToScA (and other events); Chakri Gudla "Multiscale correlative characterization of environmentally assisted crack initiation, propagation and failure in a high strength aa5083 h131 alloy" and Sam Johnston "Non destructive 3D grain imaging in aeroengine materials by diffraction contrast tomography" (att 23)
 
  • 2 October 2018 Brian Bay "DVC" and Daniil Kazantzev "Tomophantom package" - at RAL v-conf to Manchester (att 28+6)
Changed:
<
<
  • 10 July 2018 ICAL Russell Garwood ; and new (scalable) reconstruction package from the MTC Nick Brierley (att 22)
>
>
  • 10 July 2018 ICAL Russell Garwood ; and new (scalable) reconstruction package from the MTC Nick Brierley (att 22)
 
  • 12 June 2018 Jakob Jorgensen and Parmesh Gajjar "Advancing automated temporal-CT capabilities of laboratory μXCT machines" (att 11)
  • 8 May 2018 Wenjuan Sun and Stephen Brown NPL; Title: Recent development in dimensional X-ray computed tomography at NPL for advanced manufacturing (att 19)
  • 10 April 2018 - Genoveva Burca, Instrument Scientist - IMAT, ISIS Facility "IMAT- neutron imaging and diffraction instrument for materials science at the ISIS neutron spallation source" (att 21)
Line: 44 to 46
 
  • 13 December 2017 - CIL CCPi Sri Nagella (att 19)
  • 7 November 2017 - Nick Curry An Investigation into Rust Layer Microstructure (att 30)
  • 13 September 2017 - Alistair Garner Advanced 3D characterisation of iodine-induced stress corrosion cracks in zirconium alloys Jose Godhino BP summer placements (att 22)
Changed:
<
<
  • 9 August 2017 - Nghai Vo "Developments of image processing techniques for tomographic data at synchrotron facilities" from Diamond Light Source; Martin Turner on dXCT activities (att 22)
>
>
  • 9 August 2017 - Nghai Vo "Developments of image processing techniques for tomographic data at synchrotron facilities" from Diamond Light Source; Martin Turner on dXCT activities (att 22)
 
  • 19 October 2016 - review at Manchester on ToScA
  • 18 May 2016 - inc a follow on Training Session with Parmesh Gajjar on hacking the Nikon imaging devices (initially the custom bay units).
  • 16 March 2016 - Michael McCarthy (NPL), University of Manchester HMXIF, "Industrial XCT: Current develops of a dimensional verification standard for XCT (ISO 10360)”

Revision 16313 Nov 2018 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 29 to 29
 
  • 14 May 2019
  • 9 April 2019
  • 12 March 2019
Changed:
<
<
  • 12 February 2019
  • 8 January 2019
  • 11 December 2018 Experience from two Summer students on ML and Nghai Vo "Tomographic data for testing, demonstrating, and developing methods of removing ring artifacts" and "Python implementation of distortion correction methods for X-ray tomography" - https://zenodo.org/communities/ccpi
>
>
  • 12 February 2019 (provisional) Beatriz Mingo Suggested session on coatings (thermal, barrier, oxidation and corrosion resistant) Also invite wider coatings community to talk
  • 15 January 2019 (provisional) Sarah Fisher and Parmesh Gajjatr - laminography
  • 11 December 2018 Experience from two Summer students on ML and Nghai Vo "Tomographic data for testing, demonstrating, and developing methods of removing ring artifacts" and "Python implementation of distortion correction methods for X-ray tomography" - https://zenodo.org/communities/ccpi
 
  • 13 November 2018 ToScA (and other events); Chakri Gudla "Multiscale correlative characterization of environmentally assisted crack initiation, propagation and failure in a high strength aa5083 h131 alloy" and Sam Johnston "Non destructive 3D grain imaging in aeroengine materials by diffraction contrast tomography"
Changed:
<
<
  • 2 October 2018 Brian Bay "DVC" and Daniil Kazantzev "Tomophantom package" - at RAL v-conf to Manchester (att 28+6)
  • 10 July 2018 - (22) ICAL Russell Garwood ; and new reconstruction package from the MTC Nick Brierley
  • 12 June 2018 - Jakob Jorgensen and Parmesh Gajjar "Advancing automated temporal-CT capabilities of laboratory μXCT machines"
  • 8 May 2018 - Wenjuan.Sun and Stephen Brown NPL; Title: Recent development in dimensional X-ray computed tomography at NPL for advanced manufacturing
  • 10 April 2018 - Genoveva Burca, Instrument Scientist - IMAT, ISIS Facility "IMAT- neutron imaging and diffraction instrument for materials science at the ISIS neutron spallation source"
  • 13 March 2018 - Catherine Disney Microstructure and Mechanics of Intervertebral Discs from Phase Contrast Synchrotron X-ray Tomography
  • 13 February 2018 - Yi Guo “Characterizing voids during ductile fracture of a dual phase steel using X-ray computed tomography and serial sectioning EBSD” and Shelley Rawson “Bio and bio-inspired materials”
  • 16 January 2018 - Adam Cooper X-ray tomographic analysis and characterization of ductile damage, William Brayshaw Ductile fracture behaviour of Reactor Pressure Vessel steels
  • 13 December 2017 - CIL CCPi Sri Nagella
  • 7 November 2017 - Nick Curry An Investigation into Rust Layer Microstructure
  • 13 September 2017 - Alistair Garner Advanced 3D characterisation of iodine-induced stress corrosion cracks in zirconium alloys Jose Godhino BP summer placements
  • 9 August 2017 - Nghai Vo from Diamond Light Source; Martin Turner on dXCT activities “Developments of image processing techniques for tomographic data at synchrotron facilities"
>
>
  • 2 October 2018 Brian Bay "DVC" and Daniil Kazantzev "Tomophantom package" - at RAL v-conf to Manchester (att 28+6)
  • 10 July 2018 ICAL Russell Garwood ; and new (scalable) reconstruction package from the MTC Nick Brierley (att 22)
  • 12 June 2018 Jakob Jorgensen and Parmesh Gajjar "Advancing automated temporal-CT capabilities of laboratory μXCT machines" (att 11)
  • 8 May 2018 Wenjuan Sun and Stephen Brown NPL; Title: Recent development in dimensional X-ray computed tomography at NPL for advanced manufacturing (att 19)
  • 10 April 2018 - Genoveva Burca, Instrument Scientist - IMAT, ISIS Facility "IMAT- neutron imaging and diffraction instrument for materials science at the ISIS neutron spallation source" (att 21)
  • 13 March 2018 - Catherine Disney Microstructure and Mechanics of Intervertebral Discs from Phase Contrast Synchrotron X-ray Tomography (att 20)
  • 13 February 2018 - Yi Guo “Characterizing voids during ductile fracture of a dual phase steel using X-ray computed tomography and serial sectioning EBSD” and Shelley Rawson “Bio and bio-inspired materials” (att 27)
  • 16 January 2018 - Adam Cooper X-ray tomographic analysis and characterization of ductile damage, William Brayshaw Ductile fracture behaviour of Reactor Pressure Vessel steels (att 20)
  • 13 December 2017 - CIL CCPi Sri Nagella (att 19)
  • 7 November 2017 - Nick Curry An Investigation into Rust Layer Microstructure (att 30)
  • 13 September 2017 - Alistair Garner Advanced 3D characterisation of iodine-induced stress corrosion cracks in zirconium alloys Jose Godhino BP summer placements (att 22)
  • 9 August 2017 - Nghai Vo "Developments of image processing techniques for tomographic data at synchrotron facilities" from Diamond Light Source; Martin Turner on dXCT activities (att 22)
 
  • 19 October 2016 - review at Manchester on ToScA
  • 18 May 2016 - inc a follow on Training Session with Parmesh Gajjar on hacking the Nikon imaging devices (initially the custom bay units).
  • 16 March 2016 - Michael McCarthy (NPL), University of Manchester HMXIF, "Industrial XCT: Current develops of a dimensional verification standard for XCT (ISO 10360)”

Revision 16226 Oct 2018 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 32 to 32
 
  • 12 February 2019
  • 8 January 2019
  • 11 December 2018 Experience from two Summer students on ML and Nghai Vo "Tomographic data for testing, demonstrating, and developing methods of removing ring artifacts" and "Python implementation of distortion correction methods for X-ray tomography" - https://zenodo.org/communities/ccpi
Changed:
<
<
  • 13 November 2018 ToScA and other summer events reviewed.
>
>
  • 13 November 2018 ToScA (and other events); Chakri Gudla "Multiscale correlative characterization of environmentally assisted crack initiation, propagation and failure in a high strength aa5083 h131 alloy" and Sam Johnston "Non destructive 3D grain imaging in aeroengine materials by diffraction contrast tomography"
 
  • 2 October 2018 Brian Bay "DVC" and Daniil Kazantzev "Tomophantom package" - at RAL v-conf to Manchester (att 28+6)
  • 10 July 2018 - (22) ICAL Russell Garwood ; and new reconstruction package from the MTC Nick Brierley
  • 12 June 2018 - Jakob Jorgensen and Parmesh Gajjar "Advancing automated temporal-CT capabilities of laboratory μXCT machines"

Revision 16124 Oct 2018 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 19 to 19
 
  • new CCPi Flagship results
  • ATI project Wilfrid Kendall and Julia Brettschneider (Warwick)
  • ML seminars from students at RAL
Added:
>
>
  • ENGINX
 
  • ...

Schedule:

Revision 16009 Oct 2018 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 30 to 30
 
  • 12 March 2019
  • 12 February 2019
  • 8 January 2019
Changed:
<
<
  • 11 December 2018 Provisional Summer students on ML and Nghai Vo
  • 13 November 2018 ToScA and other summer events review.
>
>
  • 11 December 2018 Experience from two Summer students on ML and Nghai Vo "Tomographic data for testing, demonstrating, and developing methods of removing ring artifacts" and "Python implementation of distortion correction methods for X-ray tomography" - https://zenodo.org/communities/ccpi
  • 13 November 2018 ToScA and other summer events reviewed.
 
  • 2 October 2018 Brian Bay "DVC" and Daniil Kazantzev "Tomophantom package" - at RAL v-conf to Manchester (att 28+6)
  • 10 July 2018 - (22) ICAL Russell Garwood ; and new reconstruction package from the MTC Nick Brierley
  • 12 June 2018 - Jakob Jorgensen and Parmesh Gajjar "Advancing automated temporal-CT capabilities of laboratory μXCT machines"

Revision 15902 Oct 2018 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 30 to 30
 
  • 12 March 2019
  • 12 February 2019
  • 8 January 2019
Changed:
<
<
  • 11 December 2018 Provisional Nghai Vo
>
>
  • 11 December 2018 Provisional Summer students on ML and Nghai Vo
 
  • 13 November 2018 ToScA and other summer events review.
Changed:
<
<
  • 2 October 2018 Brian Bay "DVC" and Daniil Kazantzev "Tomophantom package" - at RAL v-conf to Manchester
>
>
  • 2 October 2018 Brian Bay "DVC" and Daniil Kazantzev "Tomophantom package" - at RAL v-conf to Manchester (att 28+6)
 
  • 10 July 2018 - (22) ICAL Russell Garwood ; and new reconstruction package from the MTC Nick Brierley
  • 12 June 2018 - Jakob Jorgensen and Parmesh Gajjar "Advancing automated temporal-CT capabilities of laboratory μXCT machines"
  • 8 May 2018 - Wenjuan.Sun and Stephen Brown NPL; Title: Recent development in dimensional X-ray computed tomography at NPL for advanced manufacturing

Revision 15827 Sep 2018 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 16 to 16
  Proposals for 2018-2019 from October 2018:
Deleted:
<
<
  • Tomophantom package DK
 
  • new CCPi Flagship results
  • ATI project Wilfrid Kendall and Julia Brettschneider (Warwick)
  • ML seminars from students at RAL
Line: 25 to 24
 Schedule:

  • 9 July 2019
Changed:
<
<
  • 11 June 2019 clash with Fringe
>
>
  • 11 June 2019 clash with Fringe
 
  • 14 May 2019
  • 9 April 2019
  • 12 March 2019
  • 12 February 2019
  • 8 January 2019
Changed:
<
<
  • 11 December 2018
  • 13 November 2018 ToScA review and other summer events.
  • 2 October 2018 Brian Bay and Nghai Vo - at RAL v-conf to Manchester
>
>
  • 11 December 2018 Provisional Nghai Vo
  • 13 November 2018 ToScA and other summer events review.
  • 2 October 2018 Brian Bay "DVC" and Daniil Kazantzev "Tomophantom package" - at RAL v-conf to Manchester
 
  • 10 July 2018 - (22) ICAL Russell Garwood ; and new reconstruction package from the MTC Nick Brierley
  • 12 June 2018 - Jakob Jorgensen and Parmesh Gajjar "Advancing automated temporal-CT capabilities of laboratory μXCT machines"
  • 8 May 2018 - Wenjuan.Sun and Stephen Brown NPL; Title: Recent development in dimensional X-ray computed tomography at NPL for advanced manufacturing

Revision 15726 Sep 2018 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 16 to 16
  Proposals for 2018-2019 from October 2018:
Deleted:
<
<
  • ...
  • new registration code: NV
  • Brian Bay in RAL - DVC code - proposed 2 Oct 2018
 
  • Tomophantom package DK
  • new CCPi Flagship results
Changed:
<
<
  • review of dXCT / RAL Workshop / ToScA
  • ATI project Wilfrid Kendall and Julia Brettschneider (Warwick)
>
>
  • ATI project Wilfrid Kendall and Julia Brettschneider (Warwick)
  • ML seminars from students at RAL
 
  • ...
Added:
>
>
Schedule:
 
  • 9 July 2019
  • 11 June 2019 clash with Fringe
  • 14 May 2019
Line: 33 to 32
 
  • 12 February 2019
  • 8 January 2019
  • 11 December 2018
Changed:
<
<
  • 13 November 2018
  • 2 October 2018
>
>
  • 13 November 2018 ToScA review and other summer events.
  • 2 October 2018 Brian Bay and Nghai Vo - at RAL v-conf to Manchester
 
  • 10 July 2018 - (22) ICAL Russell Garwood ; and new reconstruction package from the MTC Nick Brierley
  • 12 June 2018 - Jakob Jorgensen and Parmesh Gajjar "Advancing automated temporal-CT capabilities of laboratory μXCT machines"
  • 8 May 2018 - Wenjuan.Sun and Stephen Brown NPL; Title: Recent development in dimensional X-ray computed tomography at NPL for advanced manufacturing

Revision 15620 Aug 2018 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 12 to 12
 
Changed:
<
<
Lunch-and-Learn Sessions; often at 12 noon - second Tuesday of the Month in Manchester
>
>
Lunch-and-Learn Sessions; often at 12 noon - second Tuesday of the Month in Manchester
 
Changed:
<
<
Proposals foer 2018-2019:
>
>
Proposals for 2018-2019 from October 2018:
 
Changed:
<
<
  • from 9 October 2018 ...
>
>
  • ...
 
  • new registration code: NV
Changed:
<
<
  • Brian Bay when in RAL - end Sep 2018
>
>
  • Brian Bay in RAL - DVC code - proposed 2 Oct 2018
 
  • Tomophantom package DK
  • new CCPi Flagship results
Changed:
<
<
>
>
  • review of dXCT / RAL Workshop / ToScA
  • ATI project Wilfrid Kendall and Julia Brettschneider (Warwick)
  • ...

  • 9 July 2019
  • 11 June 2019 clash with Fringe
  • 14 May 2019
  • 9 April 2019
  • 12 March 2019
  • 12 February 2019
  • 8 January 2019
  • 11 December 2018
  • 13 November 2018
  • 2 October 2018
 
  • 10 July 2018 - (22) ICAL Russell Garwood ; and new reconstruction package from the MTC Nick Brierley
  • 12 June 2018 - Jakob Jorgensen and Parmesh Gajjar "Advancing automated temporal-CT capabilities of laboratory μXCT machines"
  • 8 May 2018 - Wenjuan.Sun and Stephen Brown NPL; Title: Recent development in dimensional X-ray computed tomography at NPL for advanced manufacturing
Line: 46 to 59
 17 May 2018, 10am-12noon Avizo hands-on session with FEI at RAL. Introductory to Avizo software, pipeline and then running a simple segmentation and video production.
Changed:
<
<
SCD Seminars: Raymond Chan, from the Chinese University of Hong Kong ( 2 November 2017): http://www.math.cuhk.edu.hk/~rchan/ and Jim Nagy, from Emory University in the USA ( 7 December 2017): http://www.mathcs.emory.edu/~nagy/ The seminars will be at 2pm on those respective days. They have been invited to participate in the Isaac Newton programme "Variational methods and effective algorithms for imaging and vision": https://www.newton.ac.uk/event/vmv
>
>
SCD Seminars: Raymond Chan, from the Chinese University of Hong Kong 2 November 2017: http://www.math.cuhk.edu.hk/~rchan/ and Jim Nagy, from Emory University in the USA ( 7 December 2017): http://www.mathcs.emory.edu/~nagy/ The seminars will be at 2pm on those respective days. They have been invited to participate in the Isaac Newton programme "Variational methods and effective algorithms for imaging and vision": https://www.newton.ac.uk/event/vmv
 

Visit from ThermoFisher FEI Software Group: 2 & 3 October 2017, at The Research Complex at Harwell. "Correlative & multimodal data acquisition, analysis and modelling" Contact Robert Atwood to arrange a meeting (robert.atwood@diamond.ac.uk). 2 October 2017, 2pm

Revision 15514 Aug 2018 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 18 to 18
 
  • from 9 October 2018 ...
  • new registration code: NV
Added:
>
>
  • Brian Bay when in RAL - end Sep 2018
  • Tomophantom package DK
 
  • new CCPi Flagship results

  • 10 July 2018 - (22) ICAL Russell Garwood ; and new reconstruction package from the MTC Nick Brierley

Revision 15401 Aug 2018 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 14 to 14
 
Lunch-and-Learn Sessions; often at 12 noon - second Tuesday of the Month in Manchester
Changed:
<
<
  • 9 October 2018 Lunch and Learn, 12 noon - TBA - YOU COULD BE HERE
  • 10 July 2018 - (22) ICAL Russell Garwood; and new reconstruction package from the MTC Nick Brierley
>
>
Proposals foer 2018-2019:

  • from 9 October 2018 ...
  • new registration code: NV
  • new CCPi Flagship results

  • 10 July 2018 - (22) ICAL Russell Garwood ; and new reconstruction package from the MTC Nick Brierley
 
  • 12 June 2018 - Jakob Jorgensen and Parmesh Gajjar "Advancing automated temporal-CT capabilities of laboratory μXCT machines"
  • 8 May 2018 - Wenjuan.Sun and Stephen Brown NPL; Title: Recent development in dimensional X-ray computed tomography at NPL for advanced manufacturing
  • 10 April 2018 - Genoveva Burca, Instrument Scientist - IMAT, ISIS Facility "IMAT- neutron imaging and diffraction instrument for materials science at the ISIS neutron spallation source"
Line: 25 to 30
 
  • 13 December 2017 - CIL CCPi Sri Nagella
  • 7 November 2017 - Nick Curry An Investigation into Rust Layer Microstructure
  • 13 September 2017 - Alistair Garner Advanced 3D characterisation of iodine-induced stress corrosion cracks in zirconium alloys Jose Godhino BP summer placements
Changed:
<
<
  • 9 August 2017 - Nghai Vo from Diamond Light Source; Martin Turner on dXCT activities “Developments of image processing techniques for tomographic data at synchrotron facilities"
  • 19 October 2016 - review at Manchester on ToScA
>
>
  • 9 August 2017 - Nghai Vo from Diamond Light Source; Martin Turner on dXCT activities “Developments of image processing techniques for tomographic data at synchrotron facilities"
  • 19 October 2016 - review at Manchester on ToScA
 
  • 18 May 2016 - inc a follow on Training Session with Parmesh Gajjar on hacking the Nikon imaging devices (initially the custom bay units).
  • 16 March 2016 - Michael McCarthy (NPL), University of Manchester HMXIF, "Industrial XCT: Current develops of a dimensional verification standard for XCT (ISO 10360)”
  • 1 May 2015 - Bill Lionheart will talk about Fast Tomography: From Airport Baggage Scanning to Materials Science.

Revision 15310 Jul 2018 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 15 to 15
 
Lunch-and-Learn Sessions; often at 12 noon - second Tuesday of the Month in Manchester

  • 9 October 2018 Lunch and Learn, 12 noon - TBA - YOU COULD BE HERE
Changed:
<
<
  • 10 July 2018 - ICAL Russell Garwood; and new reconstruction package from the MTC Nick Brierley
>
>
  • 10 July 2018 - (22) ICAL Russell Garwood; and new reconstruction package from the MTC Nick Brierley
 
  • 12 June 2018 - Jakob Jorgensen and Parmesh Gajjar "Advancing automated temporal-CT capabilities of laboratory μXCT machines"
  • 8 May 2018 - Wenjuan.Sun and Stephen Brown NPL; Title: Recent development in dimensional X-ray computed tomography at NPL for advanced manufacturing
  • 10 April 2018 - Genoveva Burca, Instrument Scientist - IMAT, ISIS Facility "IMAT- neutron imaging and diffraction instrument for materials science at the ISIS neutron spallation source"
Line: 36 to 36
 
SCD based Seminars:
Changed:
<
<
17 May 2018, 10am-12noon Avizo hands-on session with FEI at RAL. Introductory to Avizo software, pipeline and then running a simple segmentation and video production.
>
>
17 May 2018, 10am-12noon Avizo hands-on session with FEI at RAL. Introductory to Avizo software, pipeline and then running a simple segmentation and video production.
 

SCD Seminars: Raymond Chan, from the Chinese University of Hong Kong ( 2 November 2017): http://www.math.cuhk.edu.hk/~rchan/ and Jim Nagy, from Emory University in the USA ( 7 December 2017): http://www.mathcs.emory.edu/~nagy/ The seminars will be at 2pm on those respective days. They have been invited to participate in the Isaac Newton programme "Variational methods and effective algorithms for imaging and vision": https://www.newton.ac.uk/event/vmv

Revision 15201 Jun 2018 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 6 to 6
  Tomo-and-Coffee Session: 3D Volume Data Visualisation: Software show-and-tell. Atlas Building - Atlas Visualisation Facility. Scheduled in the Atlas Building at the Harwell campus during sometimes the last Friday of each month from 2pm we have open sessions. Consisting of a short talks/show-and-tells along with opportunity to discuss visualisation needs with your data.
Changed:
<
<
Lunch and Learn sessions at Manchester MXIF
>
>
Lunch and Learn sessions at Manchester MXIF at 12non with pizza
  Directions: Google Maps to the Atlas Visualisation Facility: https://mapsengine.google.com/map/edit?mid=zkkpP5ii84bY.krIHgGkZaXa4
Line: 14 to 14
 
Lunch-and-Learn Sessions; often at 12 noon - second Tuesday of the Month in Manchester
Changed:
<
<
  1. 9 October 2018 Lunch and Learn, 12 noon - TBA - YOU COULD BE HERE
  2. 10 July 2018 - ICAL Russell Garwood; and new reconstruction package from the MTC Nick Brierley
  3. 12 June 2018 - Jakob Jorgensen and Parmesh Gajjar "Advancing automated temporal-CT capabilities of laboratory μXCT machines"
  4. 8 May 2018 - Wenjuan.Sun and Stephen Brown NPL; Title: Recent development in dimensional X-ray computed tomography at NPL for advanced manufacturing
  5. 10 April 2018 - Genoveva Burca, Instrument Scientist - IMAT, ISIS Facility "IMAT- neutron imaging and diffraction instrument for materials science at the ISIS neutron spallation source"
  6. 13 March 2018 - Catherine Disney Microstructure and Mechanics of Intervertebral Discs from Phase Contrast Synchrotron X-ray Tomography
  7. 13 February 2018 - Yi Guo “Characterizing voids during ductile fracture of a dual phase steel using X-ray computed tomography and serial sectioning EBSD” and Shelley Rawson “Bio and bio-inspired materials”
  8. 16 January 2018 - Adam Cooper X-ray tomographic analysis and characterization of ductile damage, William Brayshaw Ductile fracture behaviour of Reactor Pressure Vessel steels
  9. 13 December 2017 - CIL CCPi Sri Nagella
  10. 7 November 2017 - Nick Curry An Investigation into Rust Layer Microstructure
  11. 13 September 2017 - Alistair Garner Advanced 3D characterisation of iodine-induced stress corrosion cracks in zirconium alloys Jose Godhino BP summer placements
  12. 9 August 2017 - Nghai Vo from Diamond Light Source; Martin Turner on dXCT activities “Developments of image processing techniques for tomographic data at synchrotron facilities"
  13. 19 October 2016 - review at Manchester on ToScA
  14. 18 May 2016 - inc a follow on Training Session with Parmesh Gajjar on hacking the Nikon imaging devices (initially the custom bay units).
  15. 16 March 2016 - Michael McCarthy (NPL), University of Manchester HMXIF, "Industrial XCT: Current develops of a dimensional verification standard for XCT (ISO 10360)”
  16. 1 May 2015 - Bill Lionheart will talk about Fast Tomography: From Airport Baggage Scanning to Materials Science.
  17. 27 February 2015 - Martin Turner “Visualisation Matters - the need to put the human back in the imaging-capture-and-computational loop: case studies from work with the CCPi (http://www.ccpi.ac.uk/) and Harwell Imaging Partnership as well as future opportunities for collaboration and resource"
>
>
  • 9 October 2018 Lunch and Learn, 12 noon - TBA - YOU COULD BE HERE
  • 10 July 2018 - ICAL Russell Garwood; and new reconstruction package from the MTC Nick Brierley
  • 12 June 2018 - Jakob Jorgensen and Parmesh Gajjar "Advancing automated temporal-CT capabilities of laboratory μXCT machines"
  • 8 May 2018 - Wenjuan.Sun and Stephen Brown NPL; Title: Recent development in dimensional X-ray computed tomography at NPL for advanced manufacturing
  • 10 April 2018 - Genoveva Burca, Instrument Scientist - IMAT, ISIS Facility "IMAT- neutron imaging and diffraction instrument for materials science at the ISIS neutron spallation source"
  • 13 March 2018 - Catherine Disney Microstructure and Mechanics of Intervertebral Discs from Phase Contrast Synchrotron X-ray Tomography
  • 13 February 2018 - Yi Guo “Characterizing voids during ductile fracture of a dual phase steel using X-ray computed tomography and serial sectioning EBSD” and Shelley Rawson “Bio and bio-inspired materials”
  • 16 January 2018 - Adam Cooper X-ray tomographic analysis and characterization of ductile damage, William Brayshaw Ductile fracture behaviour of Reactor Pressure Vessel steels
  • 13 December 2017 - CIL CCPi Sri Nagella
  • 7 November 2017 - Nick Curry An Investigation into Rust Layer Microstructure
  • 13 September 2017 - Alistair Garner Advanced 3D characterisation of iodine-induced stress corrosion cracks in zirconium alloys Jose Godhino BP summer placements
  • 9 August 2017 - Nghai Vo from Diamond Light Source; Martin Turner on dXCT activities “Developments of image processing techniques for tomographic data at synchrotron facilities"
  • 19 October 2016 - review at Manchester on ToScA
  • 18 May 2016 - inc a follow on Training Session with Parmesh Gajjar on hacking the Nikon imaging devices (initially the custom bay units).
  • 16 March 2016 - Michael McCarthy (NPL), University of Manchester HMXIF, "Industrial XCT: Current develops of a dimensional verification standard for XCT (ISO 10360)”
  • 1 May 2015 - Bill Lionheart will talk about Fast Tomography: From Airport Baggage Scanning to Materials Science.
  • 27 February 2015 - Martin Turner “Visualisation Matters - the need to put the human back in the imaging-capture-and-computational loop: case studies from work with the CCPi (http://www.ccpi.ac.uk/) and Harwell Imaging Partnership as well as future opportunities for collaboration and resource"
 
Changed:
<
<
Update on dataflow frameworks, formal presentations for 2016 - Savu, IMAT and lab based versions
>
>
SCD based Seminars:
 
Added:
>
>
17 May 2018, 10am-12noon Avizo hands-on session with FEI at RAL. Introductory to Avizo software, pipeline and then running a simple segmentation and video production.
 
Changed:
<
<
CCPi Flagship Meeting 2pm-4pm - open sessions from 3pm at RAL 20 March 2017
>
>
SCD Seminars: Raymond Chan, from the Chinese University of Hong Kong ( 2 November 2017): http://www.math.cuhk.edu.hk/~rchan/ and Jim Nagy, from Emory University in the USA ( 7 December 2017): http://www.mathcs.emory.edu/~nagy/ The seminars will be at 2pm on those respective days. They have been invited to participate in the Isaac Newton programme "Variational methods and effective algorithms for imaging and vision": https://www.newton.ac.uk/event/vmv

Visit from ThermoFisher FEI Software Group: 2 & 3 October 2017, at The Research Complex at Harwell. "Correlative & multimodal data acquisition, analysis and modelling" Contact Robert Atwood to arrange a meeting (robert.atwood@diamond.ac.uk). 2 October 2017, 2pm


SCD Seminar at 2pm, 11 September 2017: https://www.ccpi.ac.uk/node/306 RSE UK-USA Exchange; Marcus Hanwell from Kitware has been awarded an EPSRC grant to exchange information across related RSE groups in 3D tomographic visualisation and processing.


CCPi Flagship Meeting 2pm-4pm - open sessions from 3pm at RAL; 20 March 2017

 
Changed:
<
<
CCP Seminar, 9 February 2017 - Hamish Carr, University of Leeds on 'Countour tree and how it can be used for image analysis - scalability will be discussed for a system that can be t ightly coupled with data analysis' 2pm Held at RAL and via Video Conference.
>
>
CCP Seminar, 9 February 2017 - Hamish Carr, University of Leeds on 'Countour tree and how it can be used for image analysis - scalability will be discussed for a system that can be t ightly coupled with data analysis' 2pm Held at RAL and via Video Conference.
 
Line: 357 to 368
 
Training Courses:
Changed:
<
<
FEI at RAL 3 November and give a short tutorial on Avizo in the AVF (14)
>
>
FEI at RAL 3 November 2015 and give a short tutorial on Avizo in the AVF (14)
 
Changed:
<
<
Avizo course at Manchester, 3 November (18)
>
>
Avizo course at Manchester, 3 November 2015 (18)
  18 September 2015 Brian Bay and Loic Courtois organising a DVC workshop in the Atlas Visualisation Facility (12?)

Revision 15130 May 2018 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Changed:
<
<
Seminars and vis sessions (http://tinyurl.com/STFCVisSem) across the two sites.
>
>
Seminars and vis sessions (http://tinyurl.com/STFCVisSem) across the sites.
  Tomo-and-Coffee Session: 3D Volume Data Visualisation: Software show-and-tell. Atlas Building - Atlas Visualisation Facility. Scheduled in the Atlas Building at the Harwell campus during sometimes the last Friday of each month from 2pm we have open sessions. Consisting of a short talks/show-and-tells along with opportunity to discuss visualisation needs with your data.
Added:
>
>
Lunch and Learn sessions at Manchester MXIF
 Directions: Google Maps to the Atlas Visualisation Facility: https://mapsengine.google.com/map/edit?mid=zkkpP5ii84bY.krIHgGkZaXa4


Added:
>
>
Lunch-and-Learn Sessions; often at 12 noon - second Tuesday of the Month in Manchester

  1. 9 October 2018 Lunch and Learn, 12 noon - TBA - YOU COULD BE HERE
  2. 10 July 2018 - ICAL Russell Garwood; and new reconstruction package from the MTC Nick Brierley
  3. 12 June 2018 - Jakob Jorgensen and Parmesh Gajjar "Advancing automated temporal-CT capabilities of laboratory μXCT machines"
  4. 8 May 2018 - Wenjuan.Sun and Stephen Brown NPL; Title: Recent development in dimensional X-ray computed tomography at NPL for advanced manufacturing
  5. 10 April 2018 - Genoveva Burca, Instrument Scientist - IMAT, ISIS Facility "IMAT- neutron imaging and diffraction instrument for materials science at the ISIS neutron spallation source"
  6. 13 March 2018 - Catherine Disney Microstructure and Mechanics of Intervertebral Discs from Phase Contrast Synchrotron X-ray Tomography
  7. 13 February 2018 - Yi Guo “Characterizing voids during ductile fracture of a dual phase steel using X-ray computed tomography and serial sectioning EBSD” and Shelley Rawson “Bio and bio-inspired materials”
  8. 16 January 2018 - Adam Cooper X-ray tomographic analysis and characterization of ductile damage, William Brayshaw Ductile fracture behaviour of Reactor Pressure Vessel steels
  9. 13 December 2017 - CIL CCPi Sri Nagella
  10. 7 November 2017 - Nick Curry An Investigation into Rust Layer Microstructure
  11. 13 September 2017 - Alistair Garner Advanced 3D characterisation of iodine-induced stress corrosion cracks in zirconium alloys Jose Godhino BP summer placements
  12. 9 August 2017 - Nghai Vo from Diamond Light Source; Martin Turner on dXCT activities “Developments of image processing techniques for tomographic data at synchrotron facilities"
  13. 19 October 2016 - review at Manchester on ToScA
  14. 18 May 2016 - inc a follow on Training Session with Parmesh Gajjar on hacking the Nikon imaging devices (initially the custom bay units).
  15. 16 March 2016 - Michael McCarthy (NPL), University of Manchester HMXIF, "Industrial XCT: Current develops of a dimensional verification standard for XCT (ISO 10360)”
  16. 1 May 2015 - Bill Lionheart will talk about Fast Tomography: From Airport Baggage Scanning to Materials Science.
  17. 27 February 2015 - Martin Turner “Visualisation Matters - the need to put the human back in the imaging-capture-and-computational loop: case studies from work with the CCPi (http://www.ccpi.ac.uk/) and Harwell Imaging Partnership as well as future opportunities for collaboration and resource"


 Update on dataflow frameworks, formal presentations for 2016 - Savu, IMAT and lab based versions


Line: 193 to 217
  Meeting List 2015-2016: Tomo-Coffee and training vis events; so far, 9 attendees.
  • Novitom inc at RAL and link to Manchester 12 September 2016 [8+1](9)
Changed:
<
<
  • Lucia Mancini 7 October 2016 (28)
  • Mark Basham, Imano Luengo, Michele Darrow SuRVoS 31 January 2017 (29; 24+5)
  • Hamish Carr 9 February 2017 (16)
  • Flagship meeting 20 March 2017 ()
  • ...
>
>
  • Lucia Mancini 7 October 2016 (28)
  • Mark Basham, Imano Luengo, Michele Darrow SuRVoS 31 January 2017 (29; 24+5)
  • Hamish Carr 9 February 2017 (16)
  • Flagship meeting 20 March 2017 ()
  • ...
  Total first three years - 551 attendees

Meeting List 2015-2016: Tomo-Coffee and ParaView events; 184+ attendees.

  • Seminars alternative to an Away Day up to ToScA in Manchester for 2 September 2015 (27)
Changed:
<
<
  • Monday 19 October 2015 - DREAM3D (9+4+??)
  • Friday 30 October 2015 - Antoniu Pop (11)
  • Thursday 26 November 2015 - Not yet becoming IronMan – but software for Touchable Scientific Visualisations (12)
  • Monday 14 December 2015 - Bring and discsuss your own data and see the Virtual reality visualsation (RAL only) (5)
  • Wednesday 13 January 2016 - Jakob Sauer Jorgensen (10)
  • 16 March 2016 - Michael McCarthy (NPL) (31)
  • 9 June 2016 - Fringe Meeting (15)
  • 6 July, 11 July and 14 July 2016 - special meetings for vis review (??)
  • Friday 11 August 2016 - CCPi Interactive Vis (12)
  • Friday 11 July 2016 - TIGRE launch (10)
>
>
  • Monday 19 October 2015 - DREAM3D (9+4+??)
  • Friday 30 October 2015 - Antoniu Pop (11)
  • Thursday 26 November 2015 - Not yet becoming IronMan – but software for Touchable Scientific Visualisations (12)
  • Monday 14 December 2015 - Bring and discsuss your own data and see the Virtual reality visualsation (RAL only) (5)
  • Wednesday 13 January 2016 - Jakob Sauer Jorgensen (10)
  • 16 March 2016 - Michael McCarthy (NPL) (31)
  • 9 June 2016 - Fringe Meeting (15)
  • 6 July, 11 July and 14 July 2016 - special meetings for vis review (??)
  • Friday 11 August 2016 - CCPi Interactive Vis (12)
  • Friday 11 July 2016 - TIGRE launch (10)
 
  • 12 September 2016 (4 + 9) 8 September 2016 (14) TomViz.org demonstrator [29]

Meeting List 2014-2015: Tomo-Coffee and ParaView events; 203 attendees.

  • Paraview - 28 August 2014 TomViz (18) Meet the author
Changed:
<
<
  • Monday 8 September 2014 Drishti visualiser - Meet the author (am 15; pm 5)
>
>
  • Monday 8 September 2014 Drishti visualiser - Meet the author (am 15; pm 5)
 
  • Friday 26 September 2014 "Image-based simulation of diffusion and flows within experimental volumetric data sets" Dr Marcus Campbell Bannerman, University of Aberdeen (26)
  • Friday 10 October 2014 Russell Garwood "Open source software for visualising tomographic datasets" (16)
  • Wednesday 26 November 2014. Sam Worthington (Worthington Sharpe Ltd.) Title "Wing: Beyond the mouse". At Daresbury Labs (STFC) A1 Rylands (10)
  • Friday 12 December 2014 - Talk by Prof Sarah Hainsworth, University of Leicester(27+)
  • Thursday 18 December 2014 - Data and Visualisation Needs Survey , Martin Turner, Tim Morris and Ron Fowler (9)
  • Friday 27 February 2015 - Fast X-ray reconstructioon and IMAT framework (18+3+5 - three site meetings)
Changed:
<
<
  • Friday 27 March 2015 - Image Analysis program from NOCTYlab (10)
  • Friday 24 April 2015 - Avizo VR Module Demonstration (7) Extra session on 7 May 2015 (8)
  • Open Day events on 8-11 July 2015, pre-event (6)
  • Seminars alternative to an Away Day up to ToScA in Manchester for 2 September 2015 (27)
>
>
  • Friday 27 March 2015 - Image Analysis program from NOCTYlab (10)
  • Friday 24 April 2015 - Avizo VR Module Demonstration (7) Extra session on 7 May 2015 (8)
  • Open Day events on 8-11 July 2015, pre-event (6)
  • Seminars alternative to an Away Day up to ToScA in Manchester for 2 September 2015 (27)
  Season 2013-2014: 12 Tomo-Coffee events and one ParaView event; 164 attendees. Meeting List:
Changed:
<
<
  • Pre-meeting to check software suitability on 20 August 2013 (4)
  • Friday 27 September 2013 "Vis Software - Commercial to Open Source" (23)
>
>
  • Pre-meeting to check software suitability on 20 August 2013 (4)
  • Friday 27 September 2013 "Vis Software - Commercial to Open Source" (23)
 
  • Friday 25 October 2013 volume visualisation with drishti (14)
  • Friday 29 November 2013 "Quantitative Visualisation from the CCPi CCPForge repository: VolView and Avizo" Download modules from: http://ccpforge.cse.rl.ac.uk/gf/project/iqa/frs/ (17)
  • Friday 20 December 2013 Data show and understand session (8)

Revision 15013 Feb 2017 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 62 to 62
  2:00pm-3:00pm 8 September and 3pm-4pm 12 September 2016 - From ToScA abstract: Marcus D. Hanwell, S. Waldon, Y. Jiang, C. Quammen, E. Padgett, DA. Muller, R. Hovden - Tomviz: Open Source, Scalable Platform for Reproducible Materials Tomography - local host Sri Nagella.
Changed:
<
<
tn_tncSep-16.jpg Ander Biguri and Manuch Soleimani, University of Bath Tomographic Iterative GPU-based Reconstruction (TIGRE) Toolbox Materials tomography using transmission electron microscopy (TEM) involves a number of steps to go from projection images taken on the microscope to an aligned, reconstructed 3D volume. The Tomviz project builds upon a number of open source frameworks to deliver a powerful desktop application for research, leveraging the Python environment along with a number of scientific Python modules to deliver a comprehensive solution for materials tomography at nanoscale to atomic resolution. The development of the application will be discussed, along with the Pythonbased data processing pipeline, and the XML format used to enable complex, reproducible data processing and visualization pipelines. The application is based on Qt, VTK, ParaView, and ITK with a bundled Python distribution making use of NumPy, SciPy, and Python wrapped ITK/ParaView to offer a powerful visualization and data analysis application. The development, packaging, and deployment of a robust, crossplatform application for materials tomography will be discussed. The current state of reproducible analysis and data processing pipelines demonstrated, and future directions will be discussed. The use of Python will be demonstrated within this context. Reproducibility is a key problem in science, and complex data collection, alignment, reconstruction, and processing pipeline are particularly important. This project is funded by the DOE SBIR program, and is an active collaboration between developers at Kitware and scientists at Cornell University. AVF (RAL) and then at University of Manchester.
>
>
tn_tncSep-16.jpg Materials tomography using transmission electron microscopy (TEM) involves a number of steps to go from projection images taken on the microscope to an aligned, reconstructed 3D volume. The Tomviz project builds upon a number of open source frameworks to deliver a powerful desktop application for research, leveraging the Python environment along with a number of scientific Python modules to deliver a comprehensive solution for materials tomography at nanoscale to atomic resolution. The development of the application will be discussed, along with the Pythonbased data processing pipeline, and the XML format used to enable complex, reproducible data processing and visualization pipelines. The application is based on Qt, VTK, ParaView, and ITK with a bundled Python distribution making use of NumPy, SciPy, and Python wrapped ITK/ParaView to offer a powerful visualization and data analysis application. The development, packaging, and deployment of a robust, crossplatform application for materials tomography will be discussed. The current state of reproducible analysis and data processing pipelines demonstrated, and future directions will be discussed. The use of Python will be demonstrated within this context. Reproducibility is a key problem in science, and complex data collection, alignment, reconstruction, and processing pipeline are particularly important. This project is funded by the DOE SBIR program, and is an active collaboration between developers at Kitware and scientists at Cornell University. AVF (RAL) and then at University of Manchester.
 

Revision 14910 Feb 2017 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 12 to 12
  Update on dataflow frameworks, formal presentations for 2016 - Savu, IMAT and lab based versions
Changed:
<
<
Provisional - CCP Seminar, 9 February 2017 - Hamish Carr, University of Leeds on 'Countour tree and how it can be used for image analysis - scalability will be discussed for a system that can be t ightly coupled with data analysis' Time to be announced. Held at RAL and via Video Conference.
>
>

CCPi Flagship Meeting 2pm-4pm - open sessions from 3pm at RAL 20 March 2017


CCP Seminar, 9 February 2017 - Hamish Carr, University of Leeds on 'Countour tree and how it can be used for image analysis - scalability will be discussed for a system that can be t ightly coupled with data analysis' 2pm Held at RAL and via Video Conference.

 
Changed:
<
<
2:00pm-3:00pm: Monday 31 January 2017 - Software Show-and-Tell *2pm in the RAL Atlas Visualisation Facility: Mark Basham, Imano Luengo, Michele Darrow SuRVoS (Super-Region Volume Segmentation) Workbench is a new software for semi-automated segmentation of 3D image volumes. It has been developed jointly between the University of Nottingham, UK and Diamond Light Source, UK and is open source: https://diamondlightsource.github.io/SuRVoS/ RAL AVF (Atlas Visualisation Facility) and VC available - local host Sri Nagella.
>
>
2:00pm-3:00pm: Monday 31 January 2017 - Software Show-and-Tell 2pm in the RAL Atlas Visualisation Facility: Mark Basham, Imano Luengo, Michele Darrow SuRVoS (Super-Region Volume Segmentation) Workbench is a new software for semi-automated segmentation of 3D image volumes. It has been developed jointly between the University of Nottingham, UK and Diamond Light Source, UK and is open source: https://diamondlightsource.github.io/SuRVoS/ RAL AVF (Atlas Visualisation Facility) and VC available - local host Sri Nagella.
  Video Streamed to PSI Seminar Room (3.306, Alan Turing building) at University of Manchester - local host martin.turner@manchester.ac.uk

Revision 14810 Feb 2017 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 189 to 189
 
  • Novitom inc at RAL and link to Manchester 12 September 2016 [8+1](9)
  • Lucia Mancini 7 October 2016 (28)
  • Mark Basham, Imano Luengo, Michele Darrow SuRVoS 31 January 2017 (29; 24+5)
Changed:
<
<
  • Hamish Carr 9 February 2017 ()
>
>
  • Hamish Carr 9 February 2017 (16)
  • Flagship meeting 20 March 2017 ()
 
  • ...

Total first three years - 551 attendees

Revision 14707 Feb 2017 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 188 to 188
 Meeting List 2015-2016: Tomo-Coffee and training vis events; so far, 9 attendees.
  • Novitom inc at RAL and link to Manchester 12 September 2016 [8+1](9)
  • Lucia Mancini 7 October 2016 (28)
Changed:
<
<
  • Mark Basham, Imano Luengo, Michele Darrow SuRVoS 31 January 2017 (x+4+5)
>
>
  • Mark Basham, Imano Luengo, Michele Darrow SuRVoS 31 January 2017 (29; 24+5)
 
  • Hamish Carr 9 February 2017 ()
  • ...

Revision 14602 Feb 2017 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 188 to 188
 Meeting List 2015-2016: Tomo-Coffee and training vis events; so far, 9 attendees.
  • Novitom inc at RAL and link to Manchester 12 September 2016 [8+1](9)
  • Lucia Mancini 7 October 2016 (28)
Changed:
<
<
  • ...
>
>
  • Mark Basham, Imano Luengo, Michele Darrow SuRVoS 31 January 2017 (x+4+5)
  • Hamish Carr 9 February 2017 ()
  • ...
  Total first three years - 551 attendees

Revision 14513 Jan 2017 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 12 to 12
  Update on dataflow frameworks, formal presentations for 2016 - Savu, IMAT and lab based versions
Added:
>
>
Provisional - CCP Seminar, 9 February 2017 - Hamish Carr, University of Leeds on 'Countour tree and how it can be used for image analysis - scalability will be discussed for a system that can be t ightly coupled with data analysis' Time to be announced. Held at RAL and via Video Conference.
 

2:00pm-3:00pm: Monday 31 January 2017 - Software Show-and-Tell *2pm in the RAL Atlas Visualisation Facility: Mark Basham, Imano Luengo, Michele Darrow SuRVoS (Super-Region Volume Segmentation) Workbench is a new software for semi-automated segmentation of 3D image volumes. It has been developed jointly between the University of Nottingham, UK and Diamond Light Source, UK and is open source: https://diamondlightsource.github.io/SuRVoS/ RAL AVF (Atlas Visualisation Facility) and VC available - local host Sri Nagella.

Revision 14422 Dec 2016 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 16 to 16
  2:00pm-3:00pm: Monday 31 January 2017 - Software Show-and-Tell *2pm in the RAL Atlas Visualisation Facility: Mark Basham, Imano Luengo, Michele Darrow SuRVoS (Super-Region Volume Segmentation) Workbench is a new software for semi-automated segmentation of 3D image volumes. It has been developed jointly between the University of Nottingham, UK and Diamond Light Source, UK and is open source: https://diamondlightsource.github.io/SuRVoS/ RAL AVF (Atlas Visualisation Facility) and VC available - local host Sri Nagella.
Changed:
<
<
tn_tncJan-17b.jpg Abstract; "SuRVoS brings together machine learning models, computer vision techniques and human knowledge within a user interface to interactively segment large 3D volumes. The user interface of SuRVoS is divided in two panels. One panel contains all the available plugins (or tools) and the other panel, instead, resides the visualisation panel (where everything made with SuRVoS will be visualised) and another two main workflows. SuRVoS is able to work with very large datasets by means of its Region Of Interest (ROI) system and a HDF5 workspace. Everything loaded with SuRVoS and every action made within it will be saved in a workspace folder inside an HDF5 file. HDF5 is an on-disk data format that loads only the required data on memory. By using ROIs, SuRVoS limits all its actions to the selected ROI, which allows the user to load large datasets but operate only in small windows, also improving the performance of all the subsequent actions."It has been developed jointly between the University of Nottingham, UK and Diamond Light Source, UK and is open source: https://diamondlightsource.github.io/SuRVoS/ imanol.luengo@nottingham.ac.uk
>
>
Video Streamed to PSI Seminar Room (3.306, Alan Turing building) at University of Manchester - local host martin.turner@manchester.ac.uk
 
Added:
>
>
tn_tncJan-17b.jpg Abstract; "SuRVoS brings together machine learning models, computer vision techniques and human knowledge within a user interface to interactively segment large 3D volumes. The user interface of SuRVoS is divided in two panels. One panel contains all the available plugins (or tools) and the other panel, instead, resides the visualisation panel (where everything made with SuRVoS will be visualised) and another two main workflows. SuRVoS is able to work with very large datasets by means of its Region Of Interest (ROI) system and a HDF5 workspace. Everything loaded with SuRVoS and every action made within it will be saved in a workspace folder inside an HDF5 file. HDF5 is an on-disk data format that loads only the required data on memory. By using ROIs, SuRVoS limits all its actions to the selected ROI, which allows the user to load large datasets but operate only in small windows, also improving the performance of all the subsequent actions."It has been developed jointly between the University of Nottingham, UK and Diamond Light Source, UK and is open source: https://diamondlightsource.github.io/SuRVoS/ imanol.luengo@nottingham.ac.uk
 

Revision 14321 Dec 2016 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 14 to 14
 
Changed:
<
<
31 January 2016 Software Show-and-Tell 2pm in the RAL Atlas Visualisation Facility: Mark Baham et al., SuRVoS (Super-Region Volume Segmentation) Workbench is a new software for semi-automated segmentation of 3D image volumes. It has been developed jointly between the University of Nottingham, UK and Diamond Light Source, UK and is open source: https://diamondlightsource.github.io/SuRVoS/
>
>
2:00pm-3:00pm: Monday 31 January 2017 - Software Show-and-Tell *2pm in the RAL Atlas Visualisation Facility: Mark Basham, Imano Luengo, Michele Darrow SuRVoS (Super-Region Volume Segmentation) Workbench is a new software for semi-automated segmentation of 3D image volumes. It has been developed jointly between the University of Nottingham, UK and Diamond Light Source, UK and is open source: https://diamondlightsource.github.io/SuRVoS/ RAL AVF (Atlas Visualisation Facility) and VC available - local host Sri Nagella.

tn_tncJan-17b.jpg Abstract; "SuRVoS brings together machine learning models, computer vision techniques and human knowledge within a user interface to interactively segment large 3D volumes. The user interface of SuRVoS is divided in two panels. One panel contains all the available plugins (or tools) and the other panel, instead, resides the visualisation panel (where everything made with SuRVoS will be visualised) and another two main workflows. SuRVoS is able to work with very large datasets by means of its Region Of Interest (ROI) system and a HDF5 workspace. Everything loaded with SuRVoS and every action made within it will be saved in a workspace folder inside an HDF5 file. HDF5 is an on-disk data format that loads only the required data on memory. By using ROIs, SuRVoS limits all its actions to the selected ROI, which allows the user to load large datasets but operate only in small windows, also improving the performance of all the subsequent actions."It has been developed jointly between the University of Nottingham, UK and Diamond Light Source, UK and is open source: https://diamondlightsource.github.io/SuRVoS/ imanol.luengo@nottingham.ac.uk
 
Deleted:
<
<
Abstract; "SuRVoS brings together machine learning models, computer vision techniques and human knowledge within a user interface to interactively segment large 3D volumes. The user interface of SuRVoS is divided in two panels. One panel contains all the available plugins (or tools) and the other panel, instead, resides the visualisation panel (where everything made with SuRVoS will be visualised) and another two main workflows. SuRVoS is able to work with very large datasets by means of its Region Of Interest (ROI) system and a HDF5 workspace. Everything loaded with SuRVoS and every action made within it will be saved in a workspace folder inside an HDF5 file. HDF5 is an on-disk data format that loads only the required data on memory. By using ROIs, SuRVoS limits all its actions to the selected ROI, which allows the user to load large datasets but operate only in small windows, also improving the performance of all the subsequent actions."
 
Line: 452 to 453
 
META FILEATTACHMENT attachment="semseason2015_2016.jpg" attr="" comment="" date="1474279557" name="semseason2015_2016.jpg" path="semseason2015_2016.jpg" size="357785" stream="semseason2015_2016.jpg" tmpFilename="/tmp/PZRpABwAN_" user="MartinTurner" version="1"
META FILEATTACHMENT attachment="tn_tncSep-16.jpg" attr="" comment="" date="1474281029" name="tn_tncSep-16.jpg" path="tn_tncSep-16.jpg" size="63623" stream="tn_tncSep-16.jpg" tmpFilename="/tmp/qvalwdN9xI" user="MartinTurner" version="1"
META FILEATTACHMENT attachment="tn_tncSep-16b.jpg" attr="" comment="" date="1474281035" name="tn_tncSep-16b.jpg" path="tn_tncSep-16b.jpg" size="47033" stream="tn_tncSep-16b.jpg" tmpFilename="/tmp/m0pV5mSNNH" user="MartinTurner" version="1"
Added:
>
>
META FILEATTACHMENT attachment="tn_tncJan-17.jpg" attr="" comment="" date="1482311569" name="tn_tncJan-17.jpg" path="tn_tncJan-17.jpg" size="98080" stream="tn_tncJan-17.jpg" tmpFilename="/tmp/bw2d6DnDRO" user="MartinTurner" version="1"
META FILEATTACHMENT attachment="tn_tncJan-17b.jpg" attr="" comment="" date="1482312522" name="tn_tncJan-17b.jpg" path="tn_tncJan-17b.jpg" size="80494" stream="tn_tncJan-17b.jpg" tmpFilename="/tmp/PSkpTUz4IU" user="MartinTurner" version="1"

Revision 14220 Dec 2016 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 11 to 11
 

Update on dataflow frameworks, formal presentations for 2016 - Savu, IMAT and lab based versions

Added:
>
>

31 January 2016 Software Show-and-Tell 2pm in the RAL Atlas Visualisation Facility: Mark Baham et al., SuRVoS (Super-Region Volume Segmentation) Workbench is a new software for semi-automated segmentation of 3D image volumes. It has been developed jointly between the University of Nottingham, UK and Diamond Light Source, UK and is open source: https://diamondlightsource.github.io/SuRVoS/

Abstract; "SuRVoS brings together machine learning models, computer vision techniques and human knowledge within a user interface to interactively segment large 3D volumes. The user interface of SuRVoS is divided in two panels. One panel contains all the available plugins (or tools) and the other panel, instead, resides the visualisation panel (where everything made with SuRVoS will be visualised) and another two main workflows. SuRVoS is able to work with very large datasets by means of its Region Of Interest (ROI) system and a HDF5 workspace. Everything loaded with SuRVoS and every action made within it will be saved in a workspace folder inside an HDF5 file. HDF5 is an on-disk data format that loads only the required data on memory. By using ROIs, SuRVoS limits all its actions to the selected ROI, which allows the user to load large datasets but operate only in small windows, also improving the performance of all the subsequent actions."


13 December 2016 Analytic Visualisation Features: show-and-tell Afternoon session hosted at Atlas Visualisation Facility. Topics include:- Reading Diamond nexus data into Avizo, paraview and ImageJ. · Loading nexus data from Avizo scripts · Using python in Avizo. · Running CCPi quantification algorithms. Please suggest any other topics and your data problems: contact Sri, srikanth.nagella@stfc.ac.uk Based upon the previous visit by FEI (12 attendance)

 

Visiting CCPi Fellow; Friday 7 October 2016 Seminar 1pm in University of Manchester, Williamson Building, School of Earth and Environmental Sciences, room G03. "Advanced 3D and 4D X-ray imaging techniques for the morphological and textural analysis of geomaterials" Lucia Mancini Elettra-Sincrotrone Trieste S.C.p.A., 34149 Basovizza (Trieste), Italy beamline scientists of the SYRMEP beamline at the Elettra synchrotron light source.

Revision 14111 Oct 2016 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 13 to 13
 Update on dataflow frameworks, formal presentations for 2016 - Savu, IMAT and lab based versions
Changed:
<
<
Visiting CCPi Fellow; Friday 7 October 2016 Seminar 1pm in University of Manchester, Williamson Building, School of Earth and Environmental Sciences, room G03. "Advanced 3D and 4D X-ray imaging techniques for the morphological and textural analysis of geomaterials" Lucia Mancini Elettra-Sincrotrone Trieste S.C.p.A., 34149 Basovizza (Trieste), Italy beamline scientists of the SYRMEP beamline at the Elettra synchrotron light source. This will be made available as a podcast: contact for details (martin.turner@manchester.ac.uk)
>
>
Visiting CCPi Fellow; Friday 7 October 2016 Seminar 1pm in University of Manchester, Williamson Building, School of Earth and Environmental Sciences, room G03. "Advanced 3D and 4D X-ray imaging techniques for the morphological and textural analysis of geomaterials" Lucia Mancini Elettra-Sincrotrone Trieste S.C.p.A., 34149 Basovizza (Trieste), Italy beamline scientists of the SYRMEP beamline at the Elettra synchrotron light source.

This has been made available as a podcast.

  Abstract: Imaging techniques play an important role in several research fields: medicine, biology, material science, geosciences and archaeology. Optical and scanning electron microscopy techniques are widely adopted tools for the investigation of the texture and morphology in a large range of materials. Imaging techniques based on hard X-ray are also of particular interest and microradiography has proved to be useful for clinical diagnostics and for the investigation of crystal growth.

Revision 14007 Oct 2016 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 13 to 13
 Update on dataflow frameworks, formal presentations for 2016 - Savu, IMAT and lab based versions
Changed:
<
<
Visiting CCPi Fellow; Friday 7 October 2016 Seminar 1pm in University of Manchester, Williamson Building, School of Earth and Environmental Sciences, room G03. "Advanced 3D and 4D X-ray imaging techniques for the morphological and textural analysis of geomaterials" Lucia Mancini1 Elettra-Sincrotrone Trieste S.C.p.A., 34149 Basovizza (Trieste), Italy beamline scientists of the SYRMEP beamline at the Elettra synchrotron light source. This will be made available as a podcast: contact for details (martin.turner@manchester.ac.uk)
>
>
Visiting CCPi Fellow; Friday 7 October 2016 Seminar 1pm in University of Manchester, Williamson Building, School of Earth and Environmental Sciences, room G03. "Advanced 3D and 4D X-ray imaging techniques for the morphological and textural analysis of geomaterials" Lucia Mancini Elettra-Sincrotrone Trieste S.C.p.A., 34149 Basovizza (Trieste), Italy beamline scientists of the SYRMEP beamline at the Elettra synchrotron light source. This will be made available as a podcast: contact for details (martin.turner@manchester.ac.uk)
  Abstract: Imaging techniques play an important role in several research fields: medicine, biology, material science, geosciences and archaeology. Optical and scanning electron microscopy techniques are widely adopted tools for the investigation of the texture and morphology in a large range of materials. Imaging techniques based on hard X-ray are also of particular interest and microradiography has proved to be useful for clinical diagnostics and for the investigation of crystal growth.
Line: 169 to 169
 
Friday 20th August 2013 tn_tncAug-13.jpg The Hartee Centre in collaboration with Harwell Imaging Partnership (HIP) has opened a visualisation facility in the Atlas building in RAL. This is located in the CR08 room which is fully refurbished and fitted with an immersive 3D system including head tracking.The aim is for software sharing and dissemination; and to this end a three year software contract for Avizo (3D Volume Visualisation from VSG[FEI]) has been purchased across SCD, DLS and RCaH.There is a dedicated 10GbE network connection between this room and the Hartree Centre’s IBM BlueGene and Blue Wonder computers at Daresbury Lab for visualising application results. This facility also has two high memory visualisation machine each with ˝ TB RAM. They are installed with most of the popular open source visualisation applications and some commercial applications including Avizo (http://www.vsg3d.com/avizo/overview); ideal for example for quantitative visualisation of tomographic image volumes as collected at Diamond.

Meeting List 2015-2016: Tomo-Coffee and training vis events; so far, 9 attendees.

Changed:
<
<
  • Novitom inc at RAL and link to Manchester 12 September 2016 (9)
>
>
  • Novitom inc at RAL and link to Manchester 12 September 2016 [8+1](9)
  • Lucia Mancini 7 October 2016 (28)
 
  • ...

Total first three years - 551 attendees

Line: 186 to 187
 
  • 6 July, 11 July and 14 July 2016 - special meetings for vis review (??)
  • Friday 11 August 2016 - CCPi Interactive Vis (12)
  • Friday 11 July 2016 - TIGRE launch (10)
Changed:
<
<
  • 12 September 2016 (4 + 9) 8 September 2016 (14) TomViz.org demonstrator [29] 155
  • NOVITOM 12 September 2016 (8+1) [9]
>
>
  • 12 September 2016 (4 + 9) 8 September 2016 (14) TomViz.org demonstrator [29]
  Meeting List 2014-2015: Tomo-Coffee and ParaView events; 203 attendees.
  • Paraview - 28 August 2014 TomViz (18) Meet the author

Revision 13930 Sep 2016 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 11 to 11
 

Update on dataflow frameworks, formal presentations for 2016 - Savu, IMAT and lab based versions

Added:
>
>

Visiting CCPi Fellow; Friday 7 October 2016 Seminar 1pm in University of Manchester, Williamson Building, School of Earth and Environmental Sciences, room G03. "Advanced 3D and 4D X-ray imaging techniques for the morphological and textural analysis of geomaterials" Lucia Mancini1 Elettra-Sincrotrone Trieste S.C.p.A., 34149 Basovizza (Trieste), Italy beamline scientists of the SYRMEP beamline at the Elettra synchrotron light source. This will be made available as a podcast: contact for details (martin.turner@manchester.ac.uk)

Abstract: Imaging techniques play an important role in several research fields: medicine, biology, material science, geosciences and archaeology. Optical and scanning electron microscopy techniques are widely adopted tools for the investigation of the texture and morphology in a large range of materials. Imaging techniques based on hard X-ray are also of particular interest and microradiography has proved to be useful for clinical diagnostics and for the investigation of crystal growth.

In recent years great interest has been posed on X-ray computed microtomography (microCT) techniques, employing microfocus and synchrotron radiation sources. These techniques produce three-dimensional (3D) or 4D (dynamic microCT) images of the internal structure of objects with a spatial resolution at the micron- and submicron- scale. Investigations performed directly in the 3D domain overcome the limitations of stereological methods usually applied to microscopy-based analyses and a non-destructive approach is more suitable for further complementary analyses and for precious or unique samples (fossils and archeological finds, in-vivo and in-situ imaging, etc …).

An intriguing challenge is to extract directly from 3D and 4D images quantitative parameters related to the physical properties of the studied materials. Porosity and specific surface area as well as anisotropy, connectivity and tortuosity are interesting descriptors of a 3D model. However, accurate image processing and analysis methods for an effective assessment of these parameters are still an open issue in several applications.

Several scientific applications of advanced hard X-ray imaging techniques will be presented in this seminar, focusing our attention in the field of geomaterials. Examples of results obtained from the 3D morphological and textural characterization of crystals and pores in volcanic products, reservoir rocks as well as cement-based materials will be illustrated.


  4:00pm-5:00pm: Friday 12 September 2016 - Novitom http://www.novitom.com/en/ RAL AVF (Atlas Visualisation Facility) and VC (Cisco Jabber) to Whitworth Room in DL - local host Sri Nagella.

Revision 13820 Sep 2016 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 12 to 12
  Update on dataflow frameworks, formal presentations for 2016 - Savu, IMAT and lab based versions
Changed:
<
<
4:00pm-5:00pm: Friday 12 September 2016 - Novitom http://www.novitom.com/en/ RAL AVF (Atlas Visualisation Facility) and VC (Cisco Jabber) to Whitworth Room in DL - local host Sri Nagella.
>
>
4:00pm-5:00pm: Friday 12 September 2016 - Novitom http://www.novitom.com/en/ RAL AVF (Atlas Visualisation Facility) and VC (Cisco Jabber) to Whitworth Room in DL - local host Sri Nagella.
 
tn_tncSep-16b.jpg Novitom is an independent company, specialized in microanalysis, 3D materials characterization and non-destructive testing, based on advanced imaging techniques including synchrotron-powered technology. Novitom also develops customized algorithms for automated analysis of your 2D or 3D images. On demand, Novitom also designs mechanical press or thermal cells compatible with your laboratory imaging equipment. AVF (RAL) and video-link to the University of Manchester. http://www.novitom.com/en/
Line: 155 to 155
 
Friday 20th August 2013 tn_tncAug-13.jpg The Hartee Centre in collaboration with Harwell Imaging Partnership (HIP) has opened a visualisation facility in the Atlas building in RAL. This is located in the CR08 room which is fully refurbished and fitted with an immersive 3D system including head tracking.The aim is for software sharing and dissemination; and to this end a three year software contract for Avizo (3D Volume Visualisation from VSG[FEI]) has been purchased across SCD, DLS and RCaH.There is a dedicated 10GbE network connection between this room and the Hartree Centre’s IBM BlueGene and Blue Wonder computers at Daresbury Lab for visualising application results. This facility also has two high memory visualisation machine each with ˝ TB RAM. They are installed with most of the popular open source visualisation applications and some commercial applications including Avizo (http://www.vsg3d.com/avizo/overview); ideal for example for quantitative visualisation of tomographic image volumes as collected at Diamond.
Changed:
<
<
Meeting List 2015-2016: Tomo-Coffee and ParaView events; so far, 40+ attendees.
  • Seminars alternative to an Away Day up to ToScA in Manchester for 2 September 2015 (27)
>
>
Meeting List 2015-2016: Tomo-Coffee and training vis events; so far, 9 attendees.
  • Novitom inc at RAL and link to Manchester 12 September 2016 (9)
  • ...

Total first three years - 551 attendees

Meeting List 2015-2016: Tomo-Coffee and ParaView events; 184+ attendees.

  • Seminars alternative to an Away Day up to ToScA in Manchester for 2 September 2015 (27)
 
  • Monday 19 October 2015 - DREAM3D (9+4+??)
  • Friday 30 October 2015 - Antoniu Pop (11)
  • Thursday 26 November 2015 - Not yet becoming IronMan – but software for Touchable Scientific Visualisations (12)
Changed:
<
<
  • ...
  • 12 September 2016 (4 + 9) 8 September 2016 (14) TomViz.org demonstrator
  • NOVITOM 12 September 2016 (8+1)
  • Ideas welcome ... for the next season.
>
>
  • Monday 14 December 2015 - Bring and discsuss your own data and see the Virtual reality visualsation (RAL only) (5)
  • Wednesday 13 January 2016 - Jakob Sauer Jorgensen (10)
  • 16 March 2016 - Michael McCarthy (NPL) (31)
  • 9 June 2016 - Fringe Meeting (15)
  • 6 July, 11 July and 14 July 2016 - special meetings for vis review (??)
  • Friday 11 August 2016 - CCPi Interactive Vis (12)
  • Friday 11 July 2016 - TIGRE launch (10)
  • 12 September 2016 (4 + 9) 8 September 2016 (14) TomViz.org demonstrator [29] 155
  • NOVITOM 12 September 2016 (8+1) [9]
  Meeting List 2014-2015: Tomo-Coffee and ParaView events; 203 attendees.
  • Paraview - 28 August 2014 TomViz (18) Meet the author

Revision 13719 Sep 2016 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 12 to 12
  Update on dataflow frameworks, formal presentations for 2016 - Savu, IMAT and lab based versions
Changed:
<
<

>
>
4:00pm-5:00pm: Friday 12 September 2016 - Novitom http://www.novitom.com/en/ RAL AVF (Atlas Visualisation Facility) and VC (Cisco Jabber) to Whitworth Room in DL - local host Sri Nagella.

tn_tncSep-16b.jpg Novitom is an independent company, specialized in microanalysis, 3D materials characterization and non-destructive testing, based on advanced imaging techniques including synchrotron-powered technology. Novitom also develops customized algorithms for automated analysis of your 2D or 3D images. On demand, Novitom also designs mechanical press or thermal cells compatible with your laboratory imaging equipment. AVF (RAL) and video-link to the University of Manchester. http://www.novitom.com/en/
 
Changed:
<
<
From ToScA abstract: Marcus D. Hanwell, S. Waldon, Y. Jiang, C. Quammen, E. Padgett, DA. Muller, R. Hovden - Tomviz: Open Source, Scalable Platform for Reproducible Materials Tomography
>
>
Twelve Tomography Seminars for the Season 2015-2016 all in one picture:

semseason2015_2016.jpg

 
Changed:
<
<
Materials tomography using transmission electron microscopy (TEM) involves a number of steps to go from projection images taken on the microscope to an aligned, reconstructed 3D volume. The Tomviz project builds upon a number of open source frameworks to deliver a powerful desktop application for research, leveraging the Python environment along with a number of scientific Python modules to deliver a comprehensive solution for materials tomography at nanoscale to atomic resolution. The development of the application will be discussed, along with the Pythonbased data processing pipeline, and the XML format used to enable complex, reproducible data processing and visualization pipelines. The application is based on Qt, VTK, ParaView, and ITK with a bundled Python distribution making use of NumPy, SciPy, and Python wrapped ITK/ParaView to offer a powerful visualization and data analysis application. The development, packaging, and deployment of a robust, crossplatform application for materials tomography will be discussed. The current state of reproducible analysis and data processing pipelines demonstrated, and future directions will be discussed. The use of Python will be demonstrated within this context. Reproducibility is a key problem in science, and complex data collection, alignment, reconstruction, and processing pipeline are particularly important. This project is funded by the DOE SBIR program, and is an active collaboration between developers at Kitware and scientists at Cornell University.
>
>

2:00pm-3:00pm 8 September and 3pm-4pm 12 September 2016 - From ToScA abstract: Marcus D. Hanwell, S. Waldon, Y. Jiang, C. Quammen, E. Padgett, DA. Muller, R. Hovden - Tomviz: Open Source, Scalable Platform for Reproducible Materials Tomography - local host Sri Nagella.

 
Added:
>
>
tn_tncSep-16.jpg Ander Biguri and Manuch Soleimani, University of Bath Tomographic Iterative GPU-based Reconstruction (TIGRE) Toolbox Materials tomography using transmission electron microscopy (TEM) involves a number of steps to go from projection images taken on the microscope to an aligned, reconstructed 3D volume. The Tomviz project builds upon a number of open source frameworks to deliver a powerful desktop application for research, leveraging the Python environment along with a number of scientific Python modules to deliver a comprehensive solution for materials tomography at nanoscale to atomic resolution. The development of the application will be discussed, along with the Pythonbased data processing pipeline, and the XML format used to enable complex, reproducible data processing and visualization pipelines. The application is based on Qt, VTK, ParaView, and ITK with a bundled Python distribution making use of NumPy, SciPy, and Python wrapped ITK/ParaView to offer a powerful visualization and data analysis application. The development, packaging, and deployment of a robust, crossplatform application for materials tomography will be discussed. The current state of reproducible analysis and data processing pipelines demonstrated, and future directions will be discussed. The use of Python will be demonstrated within this context. Reproducibility is a key problem in science, and complex data collection, alignment, reconstruction, and processing pipeline are particularly important. This project is funded by the DOE SBIR program, and is an active collaboration between developers at Kitware and scientists at Cornell University. AVF (RAL) and then at University of Manchester.
 
Added:
>
>

  2:00pm-3:00pm: Friday 12 August 2016 - Ander Biguri and Manuch Soleimani, University of Bath https://github.com/CERN/TIGRE RAL AVF (Atlas Visualisation Facility) and VC (Cisco Jabber) to Whitworth Room in DL - local host Sri Nagella.
Line: 404 to 412
 
META FILEATTACHMENT attachment="tn_tncJan-16.jpg" attr="" comment="" date="1450707580" name="tn_tncJan-16.jpg" path="tn_tncJan-16.jpg" size="87744" stream="tn_tncJan-16.jpg" tmpFilename="/tmp/JO1_ZjdNlj" user="MartinTurner" version="1"
META FILEATTACHMENT attachment="tn_tncAug-16.jpg" attr="" comment="" date="1469018927" name="tn_tncAug-16.jpg" path="tn_tncAug-16.jpg" size="20180" stream="tn_tncAug-16.jpg" tmpFilename="/tmp/ptccgiqm1N" user="MartinTurner" version="1"
META FILEATTACHMENT attachment="tn_tncAug-16p.jpg" attr="" comment="" date="1469019926" name="tn_tncAug-16p.jpg" path="tn_tncAug-16p.jpg" size="19019" stream="tn_tncAug-16p.jpg" tmpFilename="/tmp/xfgYASEfBR" user="MartinTurner" version="1"
Added:
>
>
META FILEATTACHMENT attachment="semseason2015_2016.jpg" attr="" comment="" date="1474279557" name="semseason2015_2016.jpg" path="semseason2015_2016.jpg" size="357785" stream="semseason2015_2016.jpg" tmpFilename="/tmp/PZRpABwAN_" user="MartinTurner" version="1"
META FILEATTACHMENT attachment="tn_tncSep-16.jpg" attr="" comment="" date="1474281029" name="tn_tncSep-16.jpg" path="tn_tncSep-16.jpg" size="63623" stream="tn_tncSep-16.jpg" tmpFilename="/tmp/qvalwdN9xI" user="MartinTurner" version="1"
META FILEATTACHMENT attachment="tn_tncSep-16b.jpg" attr="" comment="" date="1474281035" name="tn_tncSep-16b.jpg" path="tn_tncSep-16b.jpg" size="47033" stream="tn_tncSep-16b.jpg" tmpFilename="/tmp/m0pV5mSNNH" user="MartinTurner" version="1"

Revision 13612 Sep 2016 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 15 to 16
 
Added:
>
>
From ToScA abstract: Marcus D. Hanwell, S. Waldon, Y. Jiang, C. Quammen, E. Padgett, DA. Muller, R. Hovden - Tomviz: Open Source, Scalable Platform for Reproducible Materials Tomography

Materials tomography using transmission electron microscopy (TEM) involves a number of steps to go from projection images taken on the microscope to an aligned, reconstructed 3D volume. The Tomviz project builds upon a number of open source frameworks to deliver a powerful desktop application for research, leveraging the Python environment along with a number of scientific Python modules to deliver a comprehensive solution for materials tomography at nanoscale to atomic resolution. The development of the application will be discussed, along with the Pythonbased data processing pipeline, and the XML format used to enable complex, reproducible data processing and visualization pipelines. The application is based on Qt, VTK, ParaView, and ITK with a bundled Python distribution making use of NumPy, SciPy, and Python wrapped ITK/ParaView to offer a powerful visualization and data analysis application. The development, packaging, and deployment of a robust, crossplatform application for materials tomography will be discussed. The current state of reproducible analysis and data processing pipelines demonstrated, and future directions will be discussed. The use of Python will be demonstrated within this context. Reproducibility is a key problem in science, and complex data collection, alignment, reconstruction, and processing pipeline are particularly important. This project is funded by the DOE SBIR program, and is an active collaboration between developers at Kitware and scientists at Cornell University.

 2:00pm-3:00pm: Friday 12 August 2016 - Ander Biguri and Manuch Soleimani, University of Bath https://github.com/CERN/TIGRE RAL AVF (Atlas Visualisation Facility) and VC (Cisco Jabber) to Whitworth Room in DL - local host Sri Nagella.

tn_tncAug-16.jpg Ander Biguri and Manuch Soleimani, University of Bath Tomographic Iterative GPU-based Reconstruction (TIGRE) Toolbox is a MATLAB/CUDA toolbox for fast and accurate 3D X-ray image reconstruction. One of the key features is the implementation of a wide variety of iterative algorithms as well as FDK, including a range of algorithms in the SART family, the Krylov subspace family, statistical inversion and a range of methods using total variation regularization. Additionally, the toolbox has GPU-accelerated projection and back projection using the latest techniques and it has a modular design that facilitates the implementation of new algorithms. The TIGRE Toolbox is released under an open source license, encouraging people to contribute. AVF (RAL) and video-link to Whitworth, Daresbury Labs.

Revision 13512 Sep 2016 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 146 to 146
 
  • Friday 30 October 2015 - Antoniu Pop (11)
  • Thursday 26 November 2015 - Not yet becoming IronMan – but software for Touchable Scientific Visualisations (12)
  • ...
Added:
>
>
  • 12 September 2016 (4 + 9) 8 September 2016 (14) TomViz.org demonstrator
  • NOVITOM 12 September 2016 (8+1)
 
  • Ideas welcome ... for the next season.

Meeting List 2014-2015: Tomo-Coffee and ParaView events; 203 attendees.

Revision 13421 Jul 2016 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 15 to 15
 
Changed:
<
<
2:00pm-3:00pm: Friday 12 August 2016 - Ander Biguri and Manuch Soleimani, University of Bath https://github.com/CERN/TIGRE RAL AVF (Atlas Visualisation Facility) and VC to Whitworth Room in DL - local host Sri Nagella.
>
>
2:00pm-3:00pm: Friday 12 August 2016 - Ander Biguri and Manuch Soleimani, University of Bath https://github.com/CERN/TIGRE RAL AVF (Atlas Visualisation Facility) and VC (Cisco Jabber) to Whitworth Room in DL - local host Sri Nagella.
 
tn_tncAug-16.jpg Ander Biguri and Manuch Soleimani, University of Bath Tomographic Iterative GPU-based Reconstruction (TIGRE) Toolbox is a MATLAB/CUDA toolbox for fast and accurate 3D X-ray image reconstruction. One of the key features is the implementation of a wide variety of iterative algorithms as well as FDK, including a range of algorithms in the SART family, the Krylov subspace family, statistical inversion and a range of methods using total variation regularization. Additionally, the toolbox has GPU-accelerated projection and back projection using the latest techniques and it has a modular design that facilitates the implementation of new algorithms. The TIGRE Toolbox is released under an open source license, encouraging people to contribute. AVF (RAL) and video-link to Whitworth, Daresbury Labs.
Line: 23 to 23
 
Changed:
<
<
2:00pm-3:30pm: Friday 11 August 2016 CCPi Interactive Vis - Show-and-Tell http://tyne.dl.ac.uk/twiki/bin/view/Visualisation/ProjectsTouchTable RAL AVF (Atlas Visualisation Facility), and VC to Whitworth Room in DL - local host Sri Nagella.
>
>
2:00pm-3:30pm: Friday 11 August 2016 CCPi Interactive Vis - Show-and-Tell http://tyne.dl.ac.uk/twiki/bin/view/Visualisation/ProjectsTouchTable RAL AVF (Atlas Visualisation Facility), and VC (Cisco Jabber) to Whitworth Room in DL - local host Sri Nagella.
 
tn_tncAug-16p.jpg A meet and discuss for future funds/ fellowships and importantly how to use the Atlas Visualisation Facility at RAL for further Public Engagement activities. The emphasis is on XCT data sets, but other items will be discussed. Items: 1. New version of Drishti/Prayog software - for stereo wall setup; 2. Ideas on how to make sure demos are usable; 3. Discuss the University of Manchester Kiosks; 4. Consider STFC PE grants to create new demos and exhibitions Information at; http://tyne.dl.ac.uk/twiki/bin/view/Visualisation/ProjectsTouchTable AVF (RAL) and video-link to Whitworth, Daresbury Labs.

Revision 13321 Jul 2016 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 13 to 13
 Update on dataflow frameworks, formal presentations for 2016 - Savu, IMAT and lab based versions
Deleted:
<
<
 
Changed:
<
<
2:00pm-3:00pm: Friday 12 August 2016 - Ander Biguri and Manuch Soleimani, University of Bath http://tyne.dl.ac.uk/twiki/bin/view/Visualisation/ProjectsTouchTable RAL AVF (Atlas Visualisation Facility), Whitworth Room in DL and Bluejeans Video Conference link - local host Sri Nagella.
>
>
2:00pm-3:00pm: Friday 12 August 2016 - Ander Biguri and Manuch Soleimani, University of Bath https://github.com/CERN/TIGRE RAL AVF (Atlas Visualisation Facility) and VC to Whitworth Room in DL - local host Sri Nagella.
 
tn_tncAug-16.jpg Ander Biguri and Manuch Soleimani, University of Bath Tomographic Iterative GPU-based Reconstruction (TIGRE) Toolbox is a MATLAB/CUDA toolbox for fast and accurate 3D X-ray image reconstruction. One of the key features is the implementation of a wide variety of iterative algorithms as well as FDK, including a range of algorithms in the SART family, the Krylov subspace family, statistical inversion and a range of methods using total variation regularization. Additionally, the toolbox has GPU-accelerated projection and back projection using the latest techniques and it has a modular design that facilitates the implementation of new algorithms. The TIGRE Toolbox is released under an open source license, encouraging people to contribute. AVF (RAL) and video-link to Whitworth, Daresbury Labs.
Line: 25 to 23
 
Changed:
<
<
2:00pm-3:30pm: Friday 11 August 2016 CCPi Interactive Vis - Show-and-Tell https://github.com/CERN/TIGRE RAL AVF (Atlas Visualisation Facility), Whitworth Room in DL and Bluejeans Video Conference link - local host Sri Nagella.

tn_tncAug-16p.jpg A meet and discuss for future funds/ fellowships and importantly how to use the Atlas Visualisation Facility at RAL for further PE activities. The emphasis is on XCT data sets, but other items will be discussed. Items: 1. New version of Drishti/Prayog software - for stereo wall setup; 2. Ideas on how to make sure demos are usable; 3. Discuss the University of Manchester Kiosks; 4. Consider STFC PE grants to create new demos and exhibitions Information at; http://tyne.dl.ac.uk/twiki/bin/view/Visualisation/ProjectsTouchTable AVF (RAL) and video-link to Whitworth, Daresbury Labs.
>
>
2:00pm-3:30pm: Friday 11 August 2016 CCPi Interactive Vis - Show-and-Tell http://tyne.dl.ac.uk/twiki/bin/view/Visualisation/ProjectsTouchTable RAL AVF (Atlas Visualisation Facility), and VC to Whitworth Room in DL - local host Sri Nagella.
 
Added:
>
>
tn_tncAug-16p.jpg A meet and discuss for future funds/ fellowships and importantly how to use the Atlas Visualisation Facility at RAL for further Public Engagement activities. The emphasis is on XCT data sets, but other items will be discussed. Items: 1. New version of Drishti/Prayog software - for stereo wall setup; 2. Ideas on how to make sure demos are usable; 3. Discuss the University of Manchester Kiosks; 4. Consider STFC PE grants to create new demos and exhibitions Information at; http://tyne.dl.ac.uk/twiki/bin/view/Visualisation/ProjectsTouchTable AVF (RAL) and video-link to Whitworth, Daresbury Labs.
  Eventbrite link: https://www.eventbrite.co.uk/e/ccpi-interactive-vis-show-and-tell-tickets-26624124473

Revision 13220 Jul 2016 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 13 to 13
 Update on dataflow frameworks, formal presentations for 2016 - Savu, IMAT and lab based versions
Added:
>
>

2:00pm-3:00pm: Friday 12 August 2016 - Ander Biguri and Manuch Soleimani, University of Bath http://tyne.dl.ac.uk/twiki/bin/view/Visualisation/ProjectsTouchTable RAL AVF (Atlas Visualisation Facility), Whitworth Room in DL and Bluejeans Video Conference link - local host Sri Nagella.

tn_tncAug-16.jpg Ander Biguri and Manuch Soleimani, University of Bath Tomographic Iterative GPU-based Reconstruction (TIGRE) Toolbox is a MATLAB/CUDA toolbox for fast and accurate 3D X-ray image reconstruction. One of the key features is the implementation of a wide variety of iterative algorithms as well as FDK, including a range of algorithms in the SART family, the Krylov subspace family, statistical inversion and a range of methods using total variation regularization. Additionally, the toolbox has GPU-accelerated projection and back projection using the latest techniques and it has a modular design that facilitates the implementation of new algorithms. The TIGRE Toolbox is released under an open source license, encouraging people to contribute. AVF (RAL) and video-link to Whitworth, Daresbury Labs.

Eventbrite link: https://www.eventbrite.co.uk/e/ccpi-software-show-and-tell-tickets-26623599904


2:00pm-3:30pm: Friday 11 August 2016 CCPi Interactive Vis - Show-and-Tell https://github.com/CERN/TIGRE RAL AVF (Atlas Visualisation Facility), Whitworth Room in DL and Bluejeans Video Conference link - local host Sri Nagella.

tn_tncAug-16p.jpg A meet and discuss for future funds/ fellowships and importantly how to use the Atlas Visualisation Facility at RAL for further PE activities. The emphasis is on XCT data sets, but other items will be discussed. Items: 1. New version of Drishti/Prayog software - for stereo wall setup; 2. Ideas on how to make sure demos are usable; 3. Discuss the University of Manchester Kiosks; 4. Consider STFC PE grants to create new demos and exhibitions Information at; http://tyne.dl.ac.uk/twiki/bin/view/Visualisation/ProjectsTouchTable AVF (RAL) and video-link to Whitworth, Daresbury Labs.

Eventbrite link: https://www.eventbrite.co.uk/e/ccpi-interactive-vis-show-and-tell-tickets-26624124473


 14 July 2016, 11:00am at DL SCD Seminar, Hamish Carr (University of Leeds), "Topological Analysis and Visualisation" Over the past two decades, data generated either numerically or empirically has grown ever larger, while the human ability to process data has not. As a result, comprehension depends more and more on data analysis as a means of supporting (or supplanting) visualisation. One of the principal methods of exploiting analysis has been through the application of the mathematical discipline of topology, which studies invariant properties of functions. In practice, however, mathematics alone are not sufficient, and a significant effort has been required in computational algorithms for topological analysis, in building scalable software to implement them, in constructing user interfaces that take advantage of them, and in validating them by application to real world visualisation problems. In addition to this, however, these methods have also driven deeper understanding of the mathematical relationships between mathematical, computational and visual representations, and have thus uncovered hitherto unsuspected methods for visualising relationships between properties in numerical simulations. This talk will therefore concentrate on an overview of developments in the application of computational topology to visualisation and analysis tasks, but will also examine how the mathematics underlying these methods have also driven developments in non-topological visualisation


Line: 375 to 397
 
META FILEATTACHMENT attachment="tn_tncDec-15.jpg" attr="" comment="" date="1449012327" name="tn_tncDec-15.jpg" path="tn_tncDec-15.jpg" size="21498" stream="tn_tncDec-15.jpg" tmpFilename="/tmp/_cEov_lnw5" user="MartinTurner" version="1"
META FILEATTACHMENT attachment="tn_tncDec-16.jpg" attr="" comment="" date="1450707551" name="tn_tncDec-16.jpg" path="tn_tncDec-16.jpg" size="87744" stream="tn_tncDec-16.jpg" tmpFilename="/tmp/zFvWGbE4Hi" user="MartinTurner" version="1"
META FILEATTACHMENT attachment="tn_tncJan-16.jpg" attr="" comment="" date="1450707580" name="tn_tncJan-16.jpg" path="tn_tncJan-16.jpg" size="87744" stream="tn_tncJan-16.jpg" tmpFilename="/tmp/JO1_ZjdNlj" user="MartinTurner" version="1"
Added:
>
>
META FILEATTACHMENT attachment="tn_tncAug-16.jpg" attr="" comment="" date="1469018927" name="tn_tncAug-16.jpg" path="tn_tncAug-16.jpg" size="20180" stream="tn_tncAug-16.jpg" tmpFilename="/tmp/ptccgiqm1N" user="MartinTurner" version="1"
META FILEATTACHMENT attachment="tn_tncAug-16p.jpg" attr="" comment="" date="1469019926" name="tn_tncAug-16p.jpg" path="tn_tncAug-16p.jpg" size="19019" stream="tn_tncAug-16p.jpg" tmpFilename="/tmp/xfgYASEfBR" user="MartinTurner" version="1"

Revision 13113 Jul 2016 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 11 to 11
 

Update on dataflow frameworks, formal presentations for 2016 - Savu, IMAT and lab based versions

Added:
>
>

14 July 2016, 11:00am at DL SCD Seminar, Hamish Carr (University of Leeds), "Topological Analysis and Visualisation" Over the past two decades, data generated either numerically or empirically has grown ever larger, while the human ability to process data has not. As a result, comprehension depends more and more on data analysis as a means of supporting (or supplanting) visualisation. One of the principal methods of exploiting analysis has been through the application of the mathematical discipline of topology, which studies invariant properties of functions. In practice, however, mathematics alone are not sufficient, and a significant effort has been required in computational algorithms for topological analysis, in building scalable software to implement them, in constructing user interfaces that take advantage of them, and in validating them by application to real world visualisation problems. In addition to this, however, these methods have also driven deeper understanding of the mathematical relationships between mathematical, computational and visual representations, and have thus uncovered hitherto unsuspected methods for visualising relationships between properties in numerical simulations. This talk will therefore concentrate on an overview of developments in the application of computational topology to visualisation and analysis tasks, but will also examine how the mathematics underlying these methods have also driven developments in non-topological visualisation

 
Changed:
<
<
6 July 2016, 2:00pm-3:00pm SCD Seminar: Dave Pugmire (Oak Ridge National Laboratory), "Visualization and Analysis Services for Extreme Scale Supercomputers" The scientific data that are being generated today, and in the near future, will quickly outpace our ability to process and understand it. The data generated are growing in multiple ways, including the size of the data, the rate at which it arrives, and the varying types of data. Additionally, data are available from multiple sources, including for example, computational simulations and sensor data extracted from experiments. In such situations, workflows for the movement and management of data, as well as the analysis and visualization while the data are in transit, become even more critical, and increasingly challenging. At the same time, revolutionary changes are emerging in the architectures of supercomputers. These changes include tremendous increases in concurrency on each node, as well as a deep hierarchy of memory. These architectures are a challenge for currently running HPC codes, as well as visualization and analysis algorithms. We are, along with collaborators at other national laboratories, and universities, researching and developing a cohesive framework that will enable scientists to manage the growing data problem, and to enable them to extract knowledge and insight. Central to this work is a “Service Oriented Architectures” (SOA) framework that provides a clear separation from the data producers and consumers. Our framework is based on the ADIOS middleware layer, that manages the data as they are produced, and orchestrates movement through the deep memory hierarchy. The data consumers, in this case visualization and analysis services built from tools like VisIt, ParaView, VTK-m, and pbdR, will interact with the middleware layer for access to data, and for coordination to optimize access across the deep memory hierarchy. These services, which will be self-consistent, interoperable operations will enable scientists to construct multiple complex workflows. This talk will present the preliminary research on the development of this framework and the associated services as well as the initial results obtained working with several large-scale simulation codes running on the Titan supercomputer at ORNL. And finally, a detailed discussion on the future research plans and directions that will enable scientific insight on exascale computing systems.
>
>
6 July 2016, 2:00pm-3:00pm at RAL AND 11 July 2016 at DL SCD Seminar: Dave Pugmire (Oak Ridge National Laboratory), "Visualization and Analysis Services for Extreme Scale Supercomputers" The scientific data that are being generated today, and in the near future, will quickly outpace our ability to process and understand it. The data generated are growing in multiple ways, including the size of the data, the rate at which it arrives, and the varying types of data. Additionally, data are available from multiple sources, including for example, computational simulations and sensor data extracted from experiments. In such situations, workflows for the movement and management of data, as well as the analysis and visualization while the data are in transit, become even more critical, and increasingly challenging. At the same time, revolutionary changes are emerging in the architectures of supercomputers. These changes include tremendous increases in concurrency on each node, as well as a deep hierarchy of memory. These architectures are a challenge for currently running HPC codes, as well as visualization and analysis algorithms. We are, along with collaborators at other national laboratories, and universities, researching and developing a cohesive framework that will enable scientists to manage the growing data problem, and to enable them to extract knowledge and insight. Central to this work is a “Service Oriented Architectures” (SOA) framework that provides a clear separation from the data producers and consumers. Our framework is based on the ADIOS middleware layer, that manages the data as they are produced, and orchestrates movement through the deep memory hierarchy. The data consumers, in this case visualization and analysis services built from tools like VisIt, ParaView, VTK-m, and pbdR, will interact with the middleware layer for access to data, and for coordination to optimize access across the deep memory hierarchy. These services, which will be self-consistent, interoperable operations will enable scientists to construct multiple complex workflows. This talk will present the preliminary research on the development of this framework and the associated services as well as the initial results obtained working with several large-scale simulation codes running on the Titan supercomputer at ORNL. And finally, a detailed discussion on the future research plans and directions that will enable scientific insight on exascale computing systems.
 

Revision 13028 Jun 2016 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 14 to 14
 
Changed:
<
<
6 July 2016, 2:00pm-3:00pm SCD Seminar: Dave Pugmire (Oak Ridge National Laboratory), "Visualization and Analysis Services for Extreme Scale Supercomputers" The scientific data that are being generated today, and in the near future, will quickly outpace our ability to process and understand it. The data generated are growing in multiple ways, including the size of the data, the rate at which it arrives, and the varying types of data. Additionally, data are available from multiple sources, including for example, computational simulations and sensor data extracted from experiments. In such situations, workflows for the movement and management of data, as well as the analysis and visualization while the data are in transit, become even more critical, and increasingly challenging. At the same time, revolutionary changes are emerging in the architectures of supercomputers. These changes include tremendous increases in concurrency on each node, as well as a deep hierarchy of memory. These architectures are a challenge for currently running HPC codes, as well as visualization and analysis algorithms. We are, along with collaborators at other national laboratories, and universities, researching and developing a cohesive framework that will enable scientists to manage the growing data problem, and to enable them to extract knowledge and insight. Central to this work is a “Service Oriented Architectures” (SOA) framework that provides a clear separation from the data producers and consumers. Our framework is based on the ADIOS middleware layer, that manages the data as they are produced, and orchestrates movement through the deep memory hierarchy. The data consumers, in this case visualization and analysis services built from tools like VisIt, ParaView, VTK-m, and pbdR, will interact with the middleware layer for access to data, and for coordination to optimize access across the deep memory hierarchy. These services, which will be self-consistent, interoperable operations will enable scientists to construct multiple complex workflows. This talk will present the preliminary research on the development of this framework and the associated services as well as the initial results obtained working with several large-scale simulation codes running on the Titan supercomputer at ORNL. And finally, a detailed discussion on the future research plans and directions that will enable scientific insight on exascale computing systems.
>
>
6 July 2016, 2:00pm-3:00pm SCD Seminar: Dave Pugmire (Oak Ridge National Laboratory), "Visualization and Analysis Services for Extreme Scale Supercomputers" The scientific data that are being generated today, and in the near future, will quickly outpace our ability to process and understand it. The data generated are growing in multiple ways, including the size of the data, the rate at which it arrives, and the varying types of data. Additionally, data are available from multiple sources, including for example, computational simulations and sensor data extracted from experiments. In such situations, workflows for the movement and management of data, as well as the analysis and visualization while the data are in transit, become even more critical, and increasingly challenging. At the same time, revolutionary changes are emerging in the architectures of supercomputers. These changes include tremendous increases in concurrency on each node, as well as a deep hierarchy of memory. These architectures are a challenge for currently running HPC codes, as well as visualization and analysis algorithms. We are, along with collaborators at other national laboratories, and universities, researching and developing a cohesive framework that will enable scientists to manage the growing data problem, and to enable them to extract knowledge and insight. Central to this work is a “Service Oriented Architectures” (SOA) framework that provides a clear separation from the data producers and consumers. Our framework is based on the ADIOS middleware layer, that manages the data as they are produced, and orchestrates movement through the deep memory hierarchy. The data consumers, in this case visualization and analysis services built from tools like VisIt, ParaView, VTK-m, and pbdR, will interact with the middleware layer for access to data, and for coordination to optimize access across the deep memory hierarchy. These services, which will be self-consistent, interoperable operations will enable scientists to construct multiple complex workflows. This talk will present the preliminary research on the development of this framework and the associated services as well as the initial results obtained working with several large-scale simulation codes running on the Titan supercomputer at ORNL. And finally, a detailed discussion on the future research plans and directions that will enable scientific insight on exascale computing systems.
 
Changed:
<
<
Workshop @RAL on Advances in X-ray Imaging: Expanding the Frontiers of Knowledge 10 June 2016 Over the past decade, X-ray tomography has made significant progress with respect to spatial, temporal resolution and imaging modality. Presentations will illustrate current achievements and future developments in techniques such as computed laminography, refraction tomography, in-line phase contrast tomography and X-ray colour imaging. - Thilo Morgenmeyer “Synchrotron laminography applied to mechanics of materials”, Mines ParisTech, France; Fabien Leonard “Synchrotron Refraction Tomography”, BAM Berlin; Simon Jacques “Recent advances in X-ray based chemical imaging”, UoM/UK Catalysis Hub; Nikolay Osipov & Stephane Quilici, Mines ParisTech, France: Zset: non-linear material & structure analysis ; Peter Lee “4D imaging of dynamic processes”; Michel Bornert “In situ testing and XR-µCT imaging for the investigation of deformation and damage mechanisms in civil engineering materials.” Ecole des Ponts ParisTech, France; Gianluca Tozzi “Application of Digital Volume Correlation for the experimental investigation of bone tissue and biomaterials”, University of Portsmouth
>
>
Workshop @RAL on Advances in X-ray Imaging: Expanding the Frontiers of Knowledge 10 June 2016 Over the past decade, X-ray tomography has made significant progress with respect to spatial, temporal resolution and imaging modality. Presentations will illustrate current achievements and future developments in techniques such as computed laminography, refraction tomography, in-line phase contrast tomography and X-ray colour imaging. - Thilo Morgenmeyer “Synchrotron laminography applied to mechanics of materials”, Mines ParisTech, France; Fabien Leonard “Synchrotron Refraction Tomography”, BAM Berlin; Simon Jacques “Recent advances in X-ray based chemical imaging”, UoM/UK Catalysis Hub; Nikolay Osipov & Stephane Quilici, Mines ParisTech, France: Zset: non-linear material & structure analysis ; Peter Lee “4D imaging of dynamic processes”; Michel Bornert “In situ testing and XR-µCT imaging for the investigation of deformation and damage mechanisms in civil engineering materials.” Ecole des Ponts ParisTech, France; Gianluca Tozzi “Application of Digital Volume Correlation for the experimental investigation of bone tissue and biomaterials”, University of Portsmouth
  Fringe Meeting - 9 June 2016 Collaborative Future X-Ray Roundtable


Changed:
<
<
16 March 2016, Lunch Seminar, Michael McCarthy (NPL), held at University of Manchester HMXIF, "Industrial XCT: Current develops of a dimensional verification standard for XCT (ISO 10360)”
>
>
16 March 2016, Lunch Seminar, Michael McCarthy (NPL), held at University of Manchester HMXIF, "Industrial XCT: Current develops of a dimensional verification standard for XCT (ISO 10360)”
 

Revision 12928 Jun 2016 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 14 to 14
 
Added:
>
>
6 July 2016, 2:00pm-3:00pm SCD Seminar: Dave Pugmire (Oak Ridge National Laboratory), "Visualization and Analysis Services for Extreme Scale Supercomputers" The scientific data that are being generated today, and in the near future, will quickly outpace our ability to process and understand it. The data generated are growing in multiple ways, including the size of the data, the rate at which it arrives, and the varying types of data. Additionally, data are available from multiple sources, including for example, computational simulations and sensor data extracted from experiments. In such situations, workflows for the movement and management of data, as well as the analysis and visualization while the data are in transit, become even more critical, and increasingly challenging. At the same time, revolutionary changes are emerging in the architectures of supercomputers. These changes include tremendous increases in concurrency on each node, as well as a deep hierarchy of memory. These architectures are a challenge for currently running HPC codes, as well as visualization and analysis algorithms. We are, along with collaborators at other national laboratories, and universities, researching and developing a cohesive framework that will enable scientists to manage the growing data problem, and to enable them to extract knowledge and insight. Central to this work is a “Service Oriented Architectures” (SOA) framework that provides a clear separation from the data producers and consumers. Our framework is based on the ADIOS middleware layer, that manages the data as they are produced, and orchestrates movement through the deep memory hierarchy. The data consumers, in this case visualization and analysis services built from tools like VisIt, ParaView, VTK-m, and pbdR, will interact with the middleware layer for access to data, and for coordination to optimize access across the deep memory hierarchy. These services, which will be self-consistent, interoperable operations will enable scientists to construct multiple complex workflows. This talk will present the preliminary research on the development of this framework and the associated services as well as the initial results obtained working with several large-scale simulation codes running on the Titan supercomputer at ORNL. And finally, a detailed discussion on the future research plans and directions that will enable scientific insight on exascale computing systems.


Workshop @RAL on Advances in X-ray Imaging: Expanding the Frontiers of Knowledge 10 June 2016 Over the past decade, X-ray tomography has made significant progress with respect to spatial, temporal resolution and imaging modality. Presentations will illustrate current achievements and future developments in techniques such as computed laminography, refraction tomography, in-line phase contrast tomography and X-ray colour imaging. - Thilo Morgenmeyer “Synchrotron laminography applied to mechanics of materials”, Mines ParisTech, France; Fabien Leonard “Synchrotron Refraction Tomography”, BAM Berlin; Simon Jacques “Recent advances in X-ray based chemical imaging”, UoM/UK Catalysis Hub; Nikolay Osipov & Stephane Quilici, Mines ParisTech, France: Zset: non-linear material & structure analysis ; Peter Lee “4D imaging of dynamic processes”; Michel Bornert “In situ testing and XR-µCT imaging for the investigation of deformation and damage mechanisms in civil engineering materials.” Ecole des Ponts ParisTech, France; Gianluca Tozzi “Application of Digital Volume Correlation for the experimental investigation of bone tissue and biomaterials”, University of Portsmouth

Fringe Meeting - 9 June 2016 Collaborative Future X-Ray Roundtable


16 March 2016, Lunch Seminar, Michael McCarthy (NPL), held at University of Manchester HMXIF, "Industrial XCT: Current develops of a dimensional verification standard for XCT (ISO 10360)”


 2:00pm-3:00pm: Wednesday 13 January 2016 - Jakob Sauer Jřrgensen, Technical University of Denmark "How few projections are enough? Predicting performance of sparsity regularization in X-ray tomography" S44 at R89 (RAL) and video-link to Arkwright, Daresbury Labs Local hosts Daniil Kazantsev sand Sri Nagella.

tn_tncJan-16.jpg Jakob Sauer Jřrgensen, Technical University of Denmark How few projections are enough? Predicting performance of sparsity regularization in X-ray tomography Sparsity regularization in X-ray tomography has shown large promise for accurate reconstruction from reduced data, potentially leading to substantially reduced patient X-ray exposure in medical imaging and shorter scan times in materials science. Compressed sensing (CS) has motivated these developments by offering guarantees of accurate reconstruction of sparse images from reduced data under suitable assumptions on the sampling matrix. However, existing CS guarantees, e.g., based on the restricted isometry property (RIP), do not apply to structured and sparse sampling matrices in X-ray tomography. The empirical success of sparsity regulaization in X-ray tomography therefore remains theoretically unexplained. In this seminar I will describe our attempts of establishing a connection between image sparsity and the amount of undersampling admitted by sparsity-regularized reconstruction methods. In particular, I will describe simulation results suggesting how one may predict the sufficient number of projections to acquire based on the sparsity level of the scanned object. I will then describe preliminary results of validation with real data using the SophiaBeads data set recently released from the University of Manchester. S44 at R89 (RAL) and video-link to Arkwright, Daresbury Labs.

Revision 12821 Dec 2015 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 14 to 14
 
Changed:
<
<
PROVISIONAL SEMINAR: 2:00pm-3:00pm Wednesday 13 January 2016 Jakob Sauer Jřrgensen Limited-data X-ray tomography and sparsity regularization Abstract: In this seminar I will give an overview of some recent results and ongoing projects within limited-data X-ray tomographic reconstruction and sparsity regularization. First, I will describe a special limited angle tomography problem in which metal bar sample holders cause cone-shaped parts missing in the sinogram. I will describe our attempts of characterizing and preliminary results of removing the resulting artifacts. Next, I will present a projection matching algorithm for automatically aligning tomographic projections of unknown exact orientation. In the present case we are interested in ultra-high resolution tomographic reconstruction from ptychography data. Currently, unknown sample translations and rotations at the nano-scale for example caused by vibration limit the achievable reconstruction quality. I will show preliminary results with simulated and real synchrotron ptychography data. Finally, I will mention our attempts of establishing a connection between image sparsity and the amount of undersampling admitted by sparsity-regularized reconstrution methods. In particular, I will describe simulation results suggesting how one may predict the sufficient number of projections to acquire based on the sparsity level of the scanned object. I will then point to a potential follow-up study for validation on real data using the SophiaBeads data set recently released from the University of Manchester
>
>
2:00pm-3:00pm: Wednesday 13 January 2016 - Jakob Sauer Jřrgensen, Technical University of Denmark "How few projections are enough? Predicting performance of sparsity regularization in X-ray tomography" S44 at R89 (RAL) and video-link to Arkwright, Daresbury Labs Local hosts Daniil Kazantsev sand Sri Nagella.

tn_tncJan-16.jpg Jakob Sauer Jřrgensen, Technical University of Denmark How few projections are enough? Predicting performance of sparsity regularization in X-ray tomography Sparsity regularization in X-ray tomography has shown large promise for accurate reconstruction from reduced data, potentially leading to substantially reduced patient X-ray exposure in medical imaging and shorter scan times in materials science. Compressed sensing (CS) has motivated these developments by offering guarantees of accurate reconstruction of sparse images from reduced data under suitable assumptions on the sampling matrix. However, existing CS guarantees, e.g., based on the restricted isometry property (RIP), do not apply to structured and sparse sampling matrices in X-ray tomography. The empirical success of sparsity regulaization in X-ray tomography therefore remains theoretically unexplained. In this seminar I will describe our attempts of establishing a connection between image sparsity and the amount of undersampling admitted by sparsity-regularized reconstruction methods. In particular, I will describe simulation results suggesting how one may predict the sufficient number of projections to acquire based on the sparsity level of the scanned object. I will then describe preliminary results of validation with real data using the SophiaBeads data set recently released from the University of Manchester. S44 at R89 (RAL) and video-link to Arkwright, Daresbury Labs.


 
Line: 352 to 356
 
META FILEATTACHMENT attachment="sechalf2015.jpg" attr="" comment="" date="1447065252" name="sechalf2015.jpg" path="sechalf2015.jpg" size="228491" stream="sechalf2015.jpg" tmpFilename="/tmp/5xjLLWDUaH" user="MartinTurner" version="1"
META FILEATTACHMENT attachment="tn_tncNov-15.jpg" attr="" comment="" date="1447680154" name="tn_tncNov-15.jpg" path="tn_tncNov-15.jpg" size="61583" stream="tn_tncNov-15.jpg" tmpFilename="/tmp/CEdTnejyqv" user="MartinTurner" version="1"
META FILEATTACHMENT attachment="tn_tncDec-15.jpg" attr="" comment="" date="1449012327" name="tn_tncDec-15.jpg" path="tn_tncDec-15.jpg" size="21498" stream="tn_tncDec-15.jpg" tmpFilename="/tmp/_cEov_lnw5" user="MartinTurner" version="1"
Added:
>
>
META FILEATTACHMENT attachment="tn_tncDec-16.jpg" attr="" comment="" date="1450707551" name="tn_tncDec-16.jpg" path="tn_tncDec-16.jpg" size="87744" stream="tn_tncDec-16.jpg" tmpFilename="/tmp/zFvWGbE4Hi" user="MartinTurner" version="1"
META FILEATTACHMENT attachment="tn_tncJan-16.jpg" attr="" comment="" date="1450707580" name="tn_tncJan-16.jpg" path="tn_tncJan-16.jpg" size="87744" stream="tn_tncJan-16.jpg" tmpFilename="/tmp/JO1_ZjdNlj" user="MartinTurner" version="1"

Revision 12715 Dec 2015 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 10 to 10
 
Deleted:
<
<
Update on High Powered Lasers exploitation: August 2015
 Update on dataflow frameworks, formal presentations for 2016 - Savu, IMAT and lab based versions


Line: 48 to 46
  semseason2014_2015.jpgsechalf2015.jpg
Added:
>
>
Update on High Powered Lasers exploitation: August 2015
 

2pm: 2 September 2015 tn_tncSep-15b.jpg The University of Manchester welcomes researchers at all levels to the CCPi imaging workshops where delegates will gain insights from and engage in troubleshooting sessions with specialists in Drishti/Prayog and Avizo. Held at the Photon Science Institute, home to the Henry Mosely X-Ray Imaging Facility (immediately prior to the Tomography for Scientific Advancement Symposium on 3rd-4th September). 2 September 2015 10am-1pm Drishti/Prayog training course - New topics and advanced use within version 2.6 of Drishti including updated version of Paint (release in July 2015; https://github.com/AjayLimaye/drishti/releases) 2 September 2015 1:30pm-4:30pm Avizo training course: 2 workflows related to analysis of fibrous materials will be presented. The second use-case is based a PhD student of Philip Withers, Bo Yu, and illustrates advanced usage of Avizo modules for segmentation. Rémi Blanc "Fibre analysis with Avizo" Abstract: The presentation will highlight different usages of Avizo for tackling with fibrous materials. We consider two major use cases. First, in the case of high magnification with resolved fibers, we will present our recent XFiber extension for tracing the centerline of cylindrical fibers and extracting statistics about the length, orientation, or curvature. The second use case will consider woven composites imaged at lower magnification, where individual fibers cannot be distinguished but the oriented texture of the yarns is visible. We will detail an advanced workflow for classifying the yarns based on their orientation. (http://www.avizo3d.com) 2 September 2015 4pm-5pm IVG (Interactive Visualisation Group), update meeting. Places are limited and allocated on a first come, first serve basis. To book your place please e-mail your name, institution and any dietary requirements to kate.a.meade@manchester.ac.uk Open Day events on 8-11 July 2015 tn_tncJul-15.jpg Schools Visit day; 95 school visitor came to explore the history of computing and 3D space on the visualisation wall. Main public day on 11 July, with over 15000 visitors; and ~560 saw fluid flow and molecular visualisation presentations.Local host for this event is Sri Nagella (srikanth.nagella@stfc.ac.uk) and Ron Fowler (ronald.fowler@stfc.ac.uk)

Revision 12615 Dec 2015 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 16 to 16
 
Changed:
<
<
2:00pm-3:00pm Wednesday 13 January 2016 Jakob Sauer Jřrgensen Limited-data X-ray tomography and sparsity regularization Abstract: In this seminar I will give an overview of some recent results and ongoing projects within limited-data X-ray tomographic reconstruction and sparsity regularization. First, I will describe a special limited angle tomography problem in which metal bar sample holders cause cone-shaped parts missing in the sinogram. I will describe our attempts of characterizing and preliminary results of removing the resulting artifacts. Next, I will present a projection matching algorithm for automatically aligning tomographic projections of unknown exact orientation. In the present case we are interested in ultra-high resolution tomographic reconstruction from ptychography data. Currently, unknown sample translations and rotations at the nano-scale for example caused by vibration limit the achievable reconstruction quality. I will show preliminary results with simulated and real synchrotron ptychography data. Finally, I will mention our attempts of establishing a connection between image sparsity and the amount of undersampling admitted by sparsity-regularized reconstrution methods. In particular, I will describe simulation results suggesting how one may predict the sufficient number of projections to acquire based on the sparsity level of the scanned object. I will then point to a potential follow-up study for validation on real data using the SophiaBeads data set recently released from the University of Manchester
>
>
PROVISIONAL SEMINAR: 2:00pm-3:00pm Wednesday 13 January 2016 Jakob Sauer Jřrgensen Limited-data X-ray tomography and sparsity regularization Abstract: In this seminar I will give an overview of some recent results and ongoing projects within limited-data X-ray tomographic reconstruction and sparsity regularization. First, I will describe a special limited angle tomography problem in which metal bar sample holders cause cone-shaped parts missing in the sinogram. I will describe our attempts of characterizing and preliminary results of removing the resulting artifacts. Next, I will present a projection matching algorithm for automatically aligning tomographic projections of unknown exact orientation. In the present case we are interested in ultra-high resolution tomographic reconstruction from ptychography data. Currently, unknown sample translations and rotations at the nano-scale for example caused by vibration limit the achievable reconstruction quality. I will show preliminary results with simulated and real synchrotron ptychography data. Finally, I will mention our attempts of establishing a connection between image sparsity and the amount of undersampling admitted by sparsity-regularized reconstrution methods. In particular, I will describe simulation results suggesting how one may predict the sufficient number of projections to acquire based on the sparsity level of the scanned object. I will then point to a potential follow-up study for validation on real data using the SophiaBeads data set recently released from the University of Manchester
 

Revision 12507 Dec 2015 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 16 to 16
 
Changed:
<
<
3:00pm-4:30pm: Monday 14 December 2015 - "“Bring/Discuss-Your-Own-Data" and see Virtual Reality visualisation" RAL Atlas Visualisation Facility
>
>
2:00pm-3:00pm Wednesday 13 January 2016 Jakob Sauer Jřrgensen Limited-data X-ray tomography and sparsity regularization Abstract: In this seminar I will give an overview of some recent results and ongoing projects within limited-data X-ray tomographic reconstruction and sparsity regularization. First, I will describe a special limited angle tomography problem in which metal bar sample holders cause cone-shaped parts missing in the sinogram. I will describe our attempts of characterizing and preliminary results of removing the resulting artifacts. Next, I will present a projection matching algorithm for automatically aligning tomographic projections of unknown exact orientation. In the present case we are interested in ultra-high resolution tomographic reconstruction from ptychography data. Currently, unknown sample translations and rotations at the nano-scale for example caused by vibration limit the achievable reconstruction quality. I will show preliminary results with simulated and real synchrotron ptychography data. Finally, I will mention our attempts of establishing a connection between image sparsity and the amount of undersampling admitted by sparsity-regularized reconstrution methods. In particular, I will describe simulation results suggesting how one may predict the sufficient number of projections to acquire based on the sparsity level of the scanned object. I will then point to a potential follow-up study for validation on real data using the SophiaBeads data set recently released from the University of Manchester
 
Changed:
<
<
tn_tncDec-15.jpg “Bring/Discuss-Your-Own-Data" and see Virtual Reality visualisation at the RAL Atlas Visualisation Facility Also launch of the new CCPi website: www.ccpi.ac.uk/ With new license servers being negotiated we are looking again at the Avizo VR toolkit: https://twitter.com/CeriBrenner/status/591602828579332096 Opportunity to explore your data interactively in 3D. Contact srikanth.nagella@stfc.ac.uk to discuss data transfer prior to the event or just turn up to see and discuss.
>
>

3:00pm-4:30pm: Monday 14 December 2015 - "“Bring/Discuss-Your-Own-Data" and see Virtual Reality visualisation" RAL Atlas Visualisation Facility

tn_tncDec-15.jpg “Bring/Discuss-Your-Own-Data" and see Virtual Reality visualisation at the RAL Atlas Visualisation Facility Also launch of the new CCPi website: www.ccpi.ac.uk/ With new license servers being negotiated we are looking again at the Avizo VR toolkit: https://twitter.com/CeriBrenner/status/591602828579332096 Opportunity to explore your data interactively in 3D. Contact srikanth.nagella@stfc.ac.uk to discuss data transfer prior to the event or just turn up to see and discuss.
 

Revision 12401 Dec 2015 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 16 to 16
 
Changed:
<
<
10:30pm-12noon: Friday 26 November 2015 - "Not yet becoming IronMan – but software for Touchable Scientific Visualisations" Martin Turner, Interactive Visualisation Group RAL Atlas Visualisation Facility
>
>
3:00pm-4:30pm: Monday 14 December 2015 - "“Bring/Discuss-Your-Own-Data" and see Virtual Reality visualisation" RAL Atlas Visualisation Facility

tn_tncDec-15.jpg “Bring/Discuss-Your-Own-Data" and see Virtual Reality visualisation at the RAL Atlas Visualisation Facility Also launch of the new CCPi website: www.ccpi.ac.uk/ With new license servers being negotiated we are looking again at the Avizo VR toolkit: https://twitter.com/CeriBrenner/status/591602828579332096 Opportunity to explore your data interactively in 3D. Contact srikanth.nagella@stfc.ac.uk to discuss data transfer prior to the event or just turn up to see and discuss.


10:30am-12noon: Friday 26 November 2015 - "Not yet becoming IronMan – but software for Touchable Scientific Visualisations" Martin Turner, Interactive Visualisation Group RAL Atlas Visualisation Facility

 
tn_tncNov-15.jpg Not yet becoming IronMan – but software for Touchable Scientific Visualisations Martin Turner, Interactive Visualisation Group RAL Atlas Visualisation Facility IVG (Interactive Visualisation Group), update meeting "…to create Touchable Pathways to Impact (and supported initially within the CCPi)" With high-end vis you can (almost) become Ironman (tweet from Laser’s experiment in RAL: https://twitter.com/CeriBrenner/status/591602828579332096) but this is not useful for mass engagement and we wished to go beyond videos with simple software solutions to add interactivity. This last year we have looked at open source code, we can use, which replaces commercial codes and allows for the development of touchtable devices but still has high-end graphics outputs. The GPU focussed Drishti-Prayog system has been chosen, modified and tested at a range of big events; and includes the first purpose built kiosk. This will be in the AVF – but we will attempt BlueJeans Video Conferencing – please email if wish to attend remotely (martin.turner@stfc.ac.uk)
Line: 341 to 347
 
META FILEATTACHMENT attachment="tn_tncOct-15b.jpg" attr="" comment="" date="1444819955" name="tn_tncOct-15b.jpg" path="tn_tncOct-15b.jpg" size="55956" stream="tn_tncOct-15b.jpg" tmpFilename="/tmp/h1cImRevc9" user="MartinTurner" version="1"
META FILEATTACHMENT attachment="sechalf2015.jpg" attr="" comment="" date="1447065252" name="sechalf2015.jpg" path="sechalf2015.jpg" size="228491" stream="sechalf2015.jpg" tmpFilename="/tmp/5xjLLWDUaH" user="MartinTurner" version="1"
META FILEATTACHMENT attachment="tn_tncNov-15.jpg" attr="" comment="" date="1447680154" name="tn_tncNov-15.jpg" path="tn_tncNov-15.jpg" size="61583" stream="tn_tncNov-15.jpg" tmpFilename="/tmp/CEdTnejyqv" user="MartinTurner" version="1"
Added:
>
>
META FILEATTACHMENT attachment="tn_tncDec-15.jpg" attr="" comment="" date="1449012327" name="tn_tncDec-15.jpg" path="tn_tncDec-15.jpg" size="21498" stream="tn_tncDec-15.jpg" tmpFilename="/tmp/_cEov_lnw5" user="MartinTurner" version="1"

Revision 12329 Nov 2015 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 12 to 12
  Update on High Powered Lasers exploitation: August 2015
Changed:
<
<
Update on dataflow frameworks in Summer 2015 - Savu, IMAT and lab based versions
>
>
Update on dataflow frameworks, formal presentations for 2016 - Savu, IMAT and lab based versions
 
Line: 95 to 95
 
  • Seminars alternative to an Away Day up to ToScA in Manchester for 2 September 2015 (27)
  • Monday 19 October 2015 - DREAM3D (9+4+??)
  • Friday 30 October 2015 - Antoniu Pop (11)
Added:
>
>
  • Thursday 26 November 2015 - Not yet becoming IronMan – but software for Touchable Scientific Visualisations (12)
 
  • ...
  • Ideas welcome ... for the next season.
Line: 216 to 217
 
Training Courses:
Added:
>
>
FEI at RAL 3 November and give a short tutorial on Avizo in the AVF (14)

Avizo course at Manchester, 3 November (18)

18 September 2015 Brian Bay and Loic Courtois organising a DVC workshop in the Atlas Visualisation Facility (12?)

2 September 2015 Avizo training course (22)

2 September 2015 Drishti/Prayog training course - New topics and advanced use within version 2.6 of Drishti (26)

MXIF Avizo course at Manchester 18-19 August (10)

Diamond Manchester Collaboration et al. Visualisation and quantification of tomographic data 28-29 July 2015 (20)

Introduction of Avizo course at Manchester; 9 June 2015 (24)

29 May 2015 "Imasim Pro" software overview (10)

12 May 2015, Avizo Visit at RAL held in AVF (Atlas Visualisation Facility) R27 (12)

 28 April 2015, Developers' Day at Manchester Workshop to focus on iterative solutions for the XTek machines (such as the released CGLS code) and what is required to get them into regular usage in the labs that use these machines. 11am-4pm.

27-30 April 2015 Physics & Software PET-MR training school this April in Leeds. If any early stage researchers wishes to attend (Masters, PhDs, or Post-Docs) might be possible to attend for free if they express their interest on time (UK-affiliated researchers are welcome to apply). http://www.pet-mri.eu/PETMR_School_15.html

Revision 12216 Nov 2015 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 16 to 16
 
Added:
>
>
10:30pm-12noon: Friday 26 November 2015 - "Not yet becoming IronMan – but software for Touchable Scientific Visualisations" Martin Turner, Interactive Visualisation Group RAL Atlas Visualisation Facility

tn_tncNov-15.jpg Not yet becoming IronMan – but software for Touchable Scientific Visualisations Martin Turner, Interactive Visualisation Group RAL Atlas Visualisation Facility IVG (Interactive Visualisation Group), update meeting "…to create Touchable Pathways to Impact (and supported initially within the CCPi)" With high-end vis you can (almost) become Ironman (tweet from Laser’s experiment in RAL: https://twitter.com/CeriBrenner/status/591602828579332096) but this is not useful for mass engagement and we wished to go beyond videos with simple software solutions to add interactivity. This last year we have looked at open source code, we can use, which replaces commercial codes and allows for the development of touchtable devices but still has high-end graphics outputs. The GPU focussed Drishti-Prayog system has been chosen, modified and tested at a range of big events; and includes the first purpose built kiosk. This will be in the AVF – but we will attempt BlueJeans Video Conferencing – please email if wish to attend remotely (martin.turner@stfc.ac.uk)


 2pm-3pm: Friday 30 October 2015 - Antoniu Pop Programming and Optimizing Task Data-Flow Applications with OpenStream and Aftermath Local host for this event is Sri Nagella (srikanth.nagella@stfc.ac.uk)

tn_tncOct-15.jpg Antoniu Pop Programming and Optimizing Task Data-Flow Applications with OpenStream and Aftermath Dynamic task-dependent parallelism is an increasingly popular programming model on shared-memory systems. Compared to data parallel loop-based concurrency, it promises enhanced scalability, load balancing and locality. These promises, however, are undermined by non-uniform memory access (NUMA). We show that it is possible to preserve the uniform hardware abstraction of contemporary task-parallel programming models, for both computing and memory resources, while achieving near-optimal data locality. Our run-time algorithms for NUMA-aware task and data placement are fully automatic, application-independent, performance-portable across NUMA machines, and adapt to dynamic changes. We take advantage of data-flow style task parallelism, where the privatization of task data enhances scalability through the elimination of false dependences, and enable fine-grained dynamic control over the placement of application data.In a second part, we present Aftermath, an interactive visualization tool for post-mortem trace analysis of cross-layer performance anomalies in dynamic task-parallel applications. We focus on the detection of anomalies inaccessible to state-of-the-art performance analysis techniques, including anomalies deriving from the interaction of multiple levels of software abstractions, anomalies associated with the hardware, and anomalies resulting from interferences between optimizations in the application and run-time system. Aftermath supports filtering, aggregation and joint visualization of key metrics and performance indicators, such as task duration, run-time state, hardware performance counters and data transfers. While not being specifically designed for NUMA architectures, Aftermath takes advantage of the explicit memory regions and dependence information in dependent task models to precisely capture long-distance and inter-core effects on complex, dynamic applications.
Line: 313 to 319
 
META FILEATTACHMENT attachment="tn_tncOct-15.jpg" attr="" comment="" date="1444810653" name="tn_tncOct-15.jpg" path="tn_tncOct-15.jpg" size="66763" stream="tn_tncOct-15.jpg" tmpFilename="/tmp/OaAeCE59YX" user="MartinTurner" version="1"
META FILEATTACHMENT attachment="tn_tncOct-15b.jpg" attr="" comment="" date="1444819955" name="tn_tncOct-15b.jpg" path="tn_tncOct-15b.jpg" size="55956" stream="tn_tncOct-15b.jpg" tmpFilename="/tmp/h1cImRevc9" user="MartinTurner" version="1"
META FILEATTACHMENT attachment="sechalf2015.jpg" attr="" comment="" date="1447065252" name="sechalf2015.jpg" path="sechalf2015.jpg" size="228491" stream="sechalf2015.jpg" tmpFilename="/tmp/5xjLLWDUaH" user="MartinTurner" version="1"
Added:
>
>
META FILEATTACHMENT attachment="tn_tncNov-15.jpg" attr="" comment="" date="1447680154" name="tn_tncNov-15.jpg" path="tn_tncNov-15.jpg" size="61583" stream="tn_tncNov-15.jpg" tmpFilename="/tmp/CEdTnejyqv" user="MartinTurner" version="1"

Revision 12109 Nov 2015 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 28 to 28
 
Changed:
<
<
Seminars moving on an Away Day up to ToScA in Manchester for 2 September 2015
>
>
Twelve Tomography Seminars for the Season 2014-2015 all in one picture:
 
Changed:
<
<
tn_tncSep-15b.jpg The University of Manchester welcomes researchers at all levels to the CCPi imaging workshops where delegates will gain insights from and engage in troubleshooting sessions with specialists in Drishti/Prayog and Avizo. Held at the Photon Science Institute, home to the Henry Mosely X-Ray Imaging Facility (immediately prior to the Tomography for Scientific Advancement Symposium on 3rd-4th September). 2 September 2015 10am-1pm Drishti/Prayog training course - New topics and advanced use within version 2.6 of Drishti including updated version of Paint (release in July 2015; https://github.com/AjayLimaye/drishti/releases) 2 September 2015 1:30pm-4:30pm Avizo training course: 2 workflows related to analysis of fibrous materials will be presented. The second use-case is based a PhD student of Philip Withers, Bo Yu, and illustrates advanced usage of Avizo modules for segmentation. Rémi Blanc "Fibre analysis with Avizo" Abstract: The presentation will highlight different usages of Avizo for tackling with fibrous materials. We consider two major use cases. First, in the case of high magnification with resolved fibers, we will present our recent XFiber extension for tracing the centerline of cylindrical fibers and extracting statistics about the length, orientation, or curvature. The second use case will consider woven composites imaged at lower magnification, where individual fibers cannot be distinguished but the oriented texture of the yarns is visible. We will detail an advanced workflow for classifying the yarns based on their orientation. (http://www.avizo3d.com) 2 September 2015 4pm-5pm IVG (Interactive Visualisation Group), update meeting. Places are limited and allocated on a first come, first serve basis. To book your place please e-mail your name, institution and any dietary requirements to kate.a.meade@manchester.ac.uk

2 September 2015 10am-1pm Drishti/Prayog training course - New topics and advanced use within version 2.6 of Drishti including updated version of Paint (release in July 2015; https://github.com/AjayLimaye/drishti/releases)

2 September 2015 1:30pm-4:30pm Avizo training course: 2 workflows related to analysis of fibrous materials will be presented. The second use-case is based on a PhD student of Philip Withers, Bo Yu, and illustrates advanced usage of Avizo modules for segmentation. Rémi Blanc "Fibre analysis with Avizo" Abstract: The presentation will highlight different usages of Avizo for tackling with fibrous materials. We consider two major use cases. First, in the case of high magnification with resolved fibers, we will present our recent XFiber extension for tracing the centerline of cylindrical fibers and extracting statistics about the length, orientation, or curvature. The second use case will consider woven composites imaged at lower magnification, where individual fibers cannot be distinguished but the oriented texture of the yarns is visible. We will detail an advanced workflow for classifying the yarns based on their orientation. (http://www.avizo3d.com)

2 September 2015 4pm-5pm IVG (Interactive Visualisation Group), update meeting

Places are limited and allocated on a first come, first serve basis. To book your place please e-mail your name, institution and any dietary requirements to kate.a.meade@manchester.ac.uk

>
>
semseason2014_2015.jpgsechalf2015.jpg
 
Changed:
<
<
Open Day events on 8-11 July 2015 - Showing 3D visualisation for various topics to over a thousand visitors.

tn_tncJul-15.jpg 8 July - Schools Visit day; 95 school visitor came to explore the history of computing and 3D space on the visualisation wall. Main public day on 11 July, with over 15000 visitors; and ~560 saw fluid flow and molecular visualisation presentations.Local host for this event is Sri Nagella (srikanth.nagella@stfc.ac.uk) and Ron Fowler (ronald.fowler@stfc.ac.uk)
>
>
2pm: 2 September 2015 tn_tncSep-15b.jpg The University of Manchester welcomes researchers at all levels to the CCPi imaging workshops where delegates will gain insights from and engage in troubleshooting sessions with specialists in Drishti/Prayog and Avizo. Held at the Photon Science Institute, home to the Henry Mosely X-Ray Imaging Facility (immediately prior to the Tomography for Scientific Advancement Symposium on 3rd-4th September). 2 September 2015 10am-1pm Drishti/Prayog training course - New topics and advanced use within version 2.6 of Drishti including updated version of Paint (release in July 2015; https://github.com/AjayLimaye/drishti/releases) 2 September 2015 1:30pm-4:30pm Avizo training course: 2 workflows related to analysis of fibrous materials will be presented. The second use-case is based a PhD student of Philip Withers, Bo Yu, and illustrates advanced usage of Avizo modules for segmentation. Rémi Blanc "Fibre analysis with Avizo" Abstract: The presentation will highlight different usages of Avizo for tackling with fibrous materials. We consider two major use cases. First, in the case of high magnification with resolved fibers, we will present our recent XFiber extension for tracing the centerline of cylindrical fibers and extracting statistics about the length, orientation, or curvature. The second use case will consider woven composites imaged at lower magnification, where individual fibers cannot be distinguished but the oriented texture of the yarns is visible. We will detail an advanced workflow for classifying the yarns based on their orientation. (http://www.avizo3d.com) 2 September 2015 4pm-5pm IVG (Interactive Visualisation Group), update meeting. Places are limited and allocated on a first come, first serve basis. To book your place please e-mail your name, institution and any dietary requirements to kate.a.meade@manchester.ac.uk Open Day events on 8-11 July 2015 tn_tncJul-15.jpg Schools Visit day; 95 school visitor came to explore the history of computing and 3D space on the visualisation wall. Main public day on 11 July, with over 15000 visitors; and ~560 saw fluid flow and molecular visualisation presentations.Local host for this event is Sri Nagella (srikanth.nagella@stfc.ac.uk) and Ron Fowler (ronald.fowler@stfc.ac.uk)
 
Changed:
<
<
2pm-3pm: Friday 24 April 2015 - Avizo Virtual Reality Module for Collaborative and Immersive VR – Now Touch Your Tomographic Volume

RAL Atlas Visualisation Facility – Live demo so you need to be there, and please bring your own data!

Local host for this event is Sri Nagella (srikanth.nagella@stfc.ac.uk)

tn_tncApr-15.jpg The Avizo VR Module enables advanced data visualization and analysis with large tiled displays as well as immersive VR configurations like CAVEs. With its unique set of features this Option represents Virtual Reality ready application for scientific and medical visualization in immersive environments. This provides; Full immersive 3D interaction; Support for single and multiple screens; Support for single and multi-pipe and for graphic clusters; Flexible customization for specific display geometry; Head-tracking and tracked hand-held 3D input devices; Control functionality via user interface; and Control of 2D user interfaces with 3D devices (virtual mouse).Local host for this event is Sri Nagella (srikanth.nagella@stfc.ac.uk)


2pm-3pm: Friday 27 March 2015 - Image processing software, NOCTYlab, show-and-tell from NOCTYLIO (http://www.noctylio.com/) "Noctylio is a software start-up company located in Bordeaux; its purpose is to open up new horizons in 3D imaging."

Local host for this event is Sri Nagella (srikanth.nagella@stfc.ac.uk)

tn_tncMar-15b.jpg "Noctylio: advanced image analysis software" Sarah Dubreucq, Benoit Recur, Eric Dehez (Noctylio SAS http://www.noctylio.com/) Noctylab v1.0 is a 3D imaging software including a large range of up-to-date image and signal processing algorithms as standards, different 3D visualisation modes such as surface and volume rendering, as well as image and signal analysis, measures and quantification tools. Noctylab v1.0 handles processing sequences that can be created, optimized and thus launched on large datasets in order to maximize computing resource usage and minimize user interactions. Specifically, we will show how Noctylab v1.0 implements tubular shape analysis sequence (archeo-bronchial tree or vascularity) based on 3D skeletonization and topology, in order to get caliber measures along branches. Moreover, the software adaptability allows the exploitation of all these tools from new imaging modalities, such as THz scanners. We will also introduce tools dedicated to hyper-spectral analysis and adapted to time-domain spectroscopy or 3D THz imaging. Such tools aim at combining both image and signal processing techniques to obtain 3D visualisation and benefit from image-based measures/analysis tools from hyper-spectral signals. This will be at 2pm at Rutherford Appleton Laboratory on the Harwell Campus: in R89/Room S44 and room Arkwright in DL (and if there is demand to Manchester ICAM). Local host for this event is Sri Nagella (srikanth.nagella@stfc.ac.uk)
>
>
2pm-3pm: Friday 24 April 2015 tn_tncApr-15.jpg The Avizo VR Module enables advanced data visualization and analysis with large tiled displays as well as immersive VR configurations like CAVEs. With its unique set of features this Option represents Virtual Reality ready application for scientific and medical visualization in immersive environments. This provides; Full immersive 3D interaction; Support for single and multiple screens; Support for single and multi-pipe and for graphic clusters; Flexible customization for specific display geometry; Head-tracking and tracked hand-held 3D input devices; Control functionality via user interface; and Control of 2D user interfaces with 3D devices (virtual mouse).Local host for this event is Sri Nagella (srikanth.nagella@stfc.ac.uk) 2pm-3pm: Friday 27 March 2015 tn_tncMar-15b.jpg "Noctylio: advanced image analysis software" Sarah Dubreucq, Benoit Recur, Eric Dehez (Noctylio SAS http://www.noctylio.com/) Noctylab v1.0 is a 3D imaging software including a large range of up-to-date image and signal processing algorithms as standards, different 3D visualisation modes such as surface and volume rendering, as well as image and signal analysis, measures and quantification tools. Noctylab v1.0 handles processing sequences that can be created, optimized and thus launched on large datasets in order to maximize computing resource usage and minimize user interactions. Specifically, we will show how Noctylab v1.0 implements tubular shape analysis sequence (archeo-bronchial tree or vascularity) based on 3D skeletonization and topology, in order to get caliber measures along branches. Moreover, the software adaptability allows the exploitation of all these tools from new imaging modalities, such as THz scanners. We will also introduce tools dedicated to hyper-spectral analysis and adapted to time-domain spectroscopy or 3D THz imaging. Such tools aim at combining both image and signal processing techniques to obtain 3D visualisation and benefit from image-based measures/analysis tools from hyper-spectral signals.
 
Changed:
<
<
3:00pm-3:30pm: Friday 27 February 2015 - "Fast Tomography: From Airport Baggage Scanning to Materials Science" Nicola Wadeson, CCPi Visiting Scientist at Diamond @Room S44 in R89 at RAL and Video conference to Arkwright room in DL and to ICAM in University of Manchester.

3:30pm-4:00pm: Friday 27 February 2015 - "Update and SCD view of the ICP: IMAT Computing Project " Sri Nagella and Erica Yang, @Room S44 in R89 at RAL and Video conference to Arkwright room in DL and to ICAM in University of Manchester.

tn_tncFeb-15.jpg The University of Manchester has recently purchased a Rapiscan RTT x-ray CT Machine, located in the School of Materials' Henry Moseley X-ray Imaging Facility (HMXIF). The RTT110 is capable of producing 3D images in real time, making it the fastest imager in the UK. Currently set-up for airport baggage scanning, we aim to adapt the machine to utilise its potential for a wide range of experiments, such as granular and multi-phase flows using dynamic x-ray CT. This will be at 3pm at Rutherford Appleton Laboratory on the Harwell Campus: in R89/Room S44 and room Arkwright in DL.

https://eventbooking.stfc.ac.uk/news-events/3d-volume-data-visualisation-feb15

tn_tncFeb-15b.jpg IMAT is the first neutron imaging instrument at ISIS. It will also be the first of its kind in the world offering unique time-of-flight tomography-driven diffraction techniques. This project aims to enable novel experimental science capabilities for IMAT through developing and deploying HPC based infrastructure needed for in-experiment tomographic image reconstruction, rendering, and interactions. It will also build the foundation needed to enable energy selective image processing, data fitting and 3D tomography driven diffraction data scrutiny capabilities for IMAT. Details at: http://stfc.ac.uk/SCD/research/data/44593.aspx This will be at 3:30pm at Rutherford Appleton Laboratory on the Harwell Campus: in R89/Room S44 and room Arkwright in DL.
>
>
3pm-3:30pm: Friday 27 February 2014. tn_tncFeb-15.jpg The University of Manchester has recently purchased a Rapiscan RTT x-ray CT Machine, located in the School of Materials' Henry Moseley X-ray Imaging Facility (HMXIF). The RTT110 is capable of producing 3D images in real time, making it the fastest imager in the UK. Currently set-up for airport baggage scanning, we aim to adapt the machine to utilise its potential for a wide range of experiments, such as granular and multi-phase flows using dynamic x-ray CT. This will be at 3pm at Rutherford Appleton Laboratory on the Harwell Campus: in R89/Room S44 and room Arkwright in DL. 3:30pm-4pm: Friday 27 February 2015 tn_tncFeb-15b.jpg IMAT is the first neutron imaging instrument at ISIS. It will also be the first of its kind in the world offering unique time-of-flight tomography-driven diffraction techniques. This project aims to enable novel experimental science capabilities for IMAT through developing and deploying HPC based infrastructure needed for in-experiment tomographic image reconstruction, rendering, and interactions. It will also build the foundation needed to enable energy selective image processing, data fitting and 3D tomography driven diffraction data scrutiny capabilities for IMAT. Details at: http://stfc.ac.uk/SCD/research/data/44593.aspx
 
Line: 84 to 52
 
Deleted:
<
<
2pm-3pm: Thursday 18 December 2014 - Data and Visualisation Needs Survey , Martin Turner, Tim Morris and Ron Fowler @RAL in R89/Access Grid and room A1 in DL

tn_tncDec-14b2.jpg "Data and Visualisation Needs Survey" Through the EPSRC SLA and via the University of Manchester we have been asked to coordinate some visualisation surveys across certain disciplines. This is to inform current uses as well as indicate trends and developments for future collaboration and high impact visualisation uses. The main surveys completed at the end of October 2014, and are currently being evaluated for long term embedding into a visualisation service. This will be at 2pm at Rutherford Appleton Laboratory on the Harwell Campus: in R89/Access Grid and room A1 in DL from 2pm.

https://eventbooking.stfc.ac.uk/news-events/3d-volume-data-visualisation-dec14b


First half for Tomography Seminars for the Season 2013-2014 all in one picture:

semseason2014_2015.jpg


 
2pm-3pm: Thursday 18 December 2014. tn_tncDec-14b2.jpg "Data and Visualisation Needs Survey" Through the EPSRC SLA and via the University of Manchester we have been asked to coordinate some visualisation surveys across certain disciplines. This is to inform current uses as well as indicate trends and developments for future collaboration and high impact visualisation uses. The main surveys completed at the end of October 2014, and are currently being evaluated for long term embedding into a visualisation service. This will be at 2pm at Rutherford Appleton Laboratory on the Harwell Campus: in R89/Access Grid and room A1 in DL from 2pm https://eventbooking.stfc.ac.uk/news-events/3d-volume-data-visualisation-dec14b 2pm-3pm: Friday 12 December 2014 tn_tncDec-14.jpg Talk by Prof Sarah Hainsworth, University of Leicester "Micro-computed X-ray tomography for forensic applications" Micro-computed X-ray tomography allows the 3D visualisation of structures with higher resolution than traditional computed tomography used in medical applications. This talk will show how micro-computed tomography has been used in a number of forensic applications including tool marks in dismemberment, determining the structural development of blow flies and imaging a 500 year old King, namely Richard III. This will be at 2pm at Rutherford Appleton Laboratory on the Harwell Campus: in the RC@H "Research Complex at Harwell" from 2pm. https://eventbooking.stfc.ac.uk/news-events/3d-volume-data-visualisation-dec14 Sarah has a BEng and doctorate from the University of Newcastle and is a Chartered Engineer (CEng), Chartered Scientist (CSci), and a Fellow of the Institute of Materials, Minerals, and Mining (FIMMM). She was the recipient of the Institution of Mechanical Engineers Tribology Bronze Medal in 1995, the Rosenhain Medal of the Institute of Materials, Minerals, and Mining in 2008, and was nominated as one the Women's Engineering Society's Outstanding Technical Women in 2009. In the area of forensic engineering, research is into two main areas, forces involved in stabbing and characterising tool marks in injury and dismemberment.


Line: 131 to 85
 
Friday 20th August 2013 tn_tncAug-13.jpg The Hartee Centre in collaboration with Harwell Imaging Partnership (HIP) has opened a visualisation facility in the Atlas building in RAL. This is located in the CR08 room which is fully refurbished and fitted with an immersive 3D system including head tracking.The aim is for software sharing and dissemination; and to this end a three year software contract for Avizo (3D Volume Visualisation from VSG[FEI]) has been purchased across SCD, DLS and RCaH.There is a dedicated 10GbE network connection between this room and the Hartree Centre’s IBM BlueGene and Blue Wonder computers at Daresbury Lab for visualising application results. This facility also has two high memory visualisation machine each with ˝ TB RAM. They are installed with most of the popular open source visualisation applications and some commercial applications including Avizo (http://www.vsg3d.com/avizo/overview); ideal for example for quantitative visualisation of tomographic image volumes as collected at Diamond.
Changed:
<
<
Meeting List 2014-2015: Tomo-Coffee and ParaView events; so far, 40+ attendees.
>
>
Meeting List 2015-2016: Tomo-Coffee and ParaView events; so far, 40+ attendees.
 
  • Seminars alternative to an Away Day up to ToScA in Manchester for 2 September 2015 (27)
  • Monday 19 October 2015 - DREAM3D (9+4+??)
Changed:
<
<
  • Friday 30 October 2015 - Antoniu Pop (???)
>
>
  • Friday 30 October 2015 - Antoniu Pop (11)
 
  • ...
  • Ideas welcome ... for the next season.
Line: 358 to 312
 
META FILEATTACHMENT attachment="tn_tncSep-15b.jpg" attr="" comment="" date="1439209775" name="tn_tncSep-15b.jpg" path="tn_tncSep-15b.jpg" size="17761" stream="tn_tncSep-15b.jpg" tmpFilename="/tmp/S59XCPoi1l" user="MartinTurner" version="1"
META FILEATTACHMENT attachment="tn_tncOct-15.jpg" attr="" comment="" date="1444810653" name="tn_tncOct-15.jpg" path="tn_tncOct-15.jpg" size="66763" stream="tn_tncOct-15.jpg" tmpFilename="/tmp/OaAeCE59YX" user="MartinTurner" version="1"
META FILEATTACHMENT attachment="tn_tncOct-15b.jpg" attr="" comment="" date="1444819955" name="tn_tncOct-15b.jpg" path="tn_tncOct-15b.jpg" size="55956" stream="tn_tncOct-15b.jpg" tmpFilename="/tmp/h1cImRevc9" user="MartinTurner" version="1"
Added:
>
>
META FILEATTACHMENT attachment="sechalf2015.jpg" attr="" comment="" date="1447065252" name="sechalf2015.jpg" path="sechalf2015.jpg" size="228491" stream="sechalf2015.jpg" tmpFilename="/tmp/5xjLLWDUaH" user="MartinTurner" version="1"

Revision 12019 Oct 2015 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 131 to 131
 
Friday 20th August 2013 tn_tncAug-13.jpg The Hartee Centre in collaboration with Harwell Imaging Partnership (HIP) has opened a visualisation facility in the Atlas building in RAL. This is located in the CR08 room which is fully refurbished and fitted with an immersive 3D system including head tracking.The aim is for software sharing and dissemination; and to this end a three year software contract for Avizo (3D Volume Visualisation from VSG[FEI]) has been purchased across SCD, DLS and RCaH.There is a dedicated 10GbE network connection between this room and the Hartree Centre’s IBM BlueGene and Blue Wonder computers at Daresbury Lab for visualising application results. This facility also has two high memory visualisation machine each with ˝ TB RAM. They are installed with most of the popular open source visualisation applications and some commercial applications including Avizo (http://www.vsg3d.com/avizo/overview); ideal for example for quantitative visualisation of tomographic image volumes as collected at Diamond.
Changed:
<
<
Meeting List 2014-2015: Tomo-Coffee and ParaView events; first half, 126+ attendees.
>
>
Meeting List 2014-2015: Tomo-Coffee and ParaView events; so far, 40+ attendees.
  • Seminars alternative to an Away Day up to ToScA in Manchester for 2 September 2015 (27)
  • Monday 19 October 2015 - DREAM3D (9+4+??)
  • Friday 30 October 2015 - Antoniu Pop (???)
  • ...
  • Ideas welcome ... for the next season.

Meeting List 2014-2015: Tomo-Coffee and ParaView events; 203 attendees.

 
  • Paraview - 28 August 2014 TomViz (18) Meet the author
  • Monday 8 September 2014 Drishti visualiser - Meet the author (am 15; pm 5)
  • Friday 26 September 2014 "Image-based simulation of diffusion and flows within experimental volumetric data sets" Dr Marcus Campbell Bannerman, University of Aberdeen (26)
Line: 141 to 148
 
  • Thursday 18 December 2014 - Data and Visualisation Needs Survey , Martin Turner, Tim Morris and Ron Fowler (9)
  • Friday 27 February 2015 - Fast X-ray reconstructioon and IMAT framework (18+3+5 - three site meetings)
  • Friday 27 March 2015 - Image Analysis program from NOCTYlab (10)
Changed:
<
<
  • Friday 24 April 2015 - Avizo VR Module Demonstration (7) Extra session on 7 May 2015 (...)
  • ...
  • Ideas welcome ... for the next season.
>
>
  • Friday 24 April 2015 - Avizo VR Module Demonstration (7) Extra session on 7 May 2015 (8)
  • Open Day events on 8-11 July 2015, pre-event (6)
  • Seminars alternative to an Away Day up to ToScA in Manchester for 2 September 2015 (27)
  Season 2013-2014: 12 Tomo-Coffee events and one ParaView event; 164 attendees. Meeting List:
  • Pre-meeting to check software suitability on 20 August 2013 (4)

Revision 11914 Oct 2015 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 18 to 18
  2pm-3pm: Friday 30 October 2015 - Antoniu Pop Programming and Optimizing Task Data-Flow Applications with OpenStream and Aftermath Local host for this event is Sri Nagella (srikanth.nagella@stfc.ac.uk)
Changed:
<
<
tn_tncOct-15.jpg Antoniu Pop Programming and Optimizing Task Data-Flow Applications with OpenStream and Aftermath Dynamic task-dependent parallelism is an increasingly popular programming model on shared-memory systems. Compared to data parallel loop-based concurrency, it promises enhanced scalability, load balancing and locality. These promises, however, are undermined by non-uniform memory access (NUMA). We show that it is possible to preserve the uniform hardware abstraction of contemporary task-parallel programming models, for both computing and memory resources, while achieving near-optimal data locality. Our run-time algorithms for NUMA-aware task and data placement are fully automatic, application-independent, performance-portable across NUMA machines, and adapt to dynamic changes. We take advantage of data-flow style task parallelism, where the privatization of task data enhances scalability through the elimination of false dependences, and enable fine-grained dynamic control over the placement of application data.In a second part, we present Aftermath, an interactive visualization tool for post-mortem trace analysis of cross-layer performance anomalies in dynamic task-parallel applications. We focus on the detection of anomalies inaccessible to state-of-the-art performance analysis techniques, including anomalies deriving from the interaction of multiple levels of software abstractions, anomalies associated with the hardware, and anomalies resulting from interferences between optimizations in the application and run-time system. Aftermath supports filtering, aggregation and joint visualization of key metrics and performance indicators, such as task duration, run-time state, hardware performance counters and data transfers. While not being specifically designed for NUMA architectures, Aftermath takes advantage of the explicit memory regions and dependence information in dependent task models to precisely capture long-distance and inter-core effects on complex, dynamic applications.
>
>
tn_tncOct-15.jpg Antoniu Pop Programming and Optimizing Task Data-Flow Applications with OpenStream and Aftermath Dynamic task-dependent parallelism is an increasingly popular programming model on shared-memory systems. Compared to data parallel loop-based concurrency, it promises enhanced scalability, load balancing and locality. These promises, however, are undermined by non-uniform memory access (NUMA). We show that it is possible to preserve the uniform hardware abstraction of contemporary task-parallel programming models, for both computing and memory resources, while achieving near-optimal data locality. Our run-time algorithms for NUMA-aware task and data placement are fully automatic, application-independent, performance-portable across NUMA machines, and adapt to dynamic changes. We take advantage of data-flow style task parallelism, where the privatization of task data enhances scalability through the elimination of false dependences, and enable fine-grained dynamic control over the placement of application data.In a second part, we present Aftermath, an interactive visualization tool for post-mortem trace analysis of cross-layer performance anomalies in dynamic task-parallel applications. We focus on the detection of anomalies inaccessible to state-of-the-art performance analysis techniques, including anomalies deriving from the interaction of multiple levels of software abstractions, anomalies associated with the hardware, and anomalies resulting from interferences between optimizations in the application and run-time system. Aftermath supports filtering, aggregation and joint visualization of key metrics and performance indicators, such as task duration, run-time state, hardware performance counters and data transfers. While not being specifically designed for NUMA architectures, Aftermath takes advantage of the explicit memory regions and dependence information in dependent task models to precisely capture long-distance and inter-core effects on complex, dynamic applications.
 
Changed:
<
<
19 October VC seminar: Mike Groeber "Presentation on the general overview of DREAM.3D" http://dream3d.bluequartz.net/?p=1313
>
>
2pm-3pm: Friday 19 October 2015 - Video Conferencing Mike Groeber Presentation on the general overview of DREAM.3D" http://dream3d.bluequartz.net/?p=1313

tn_tncOct-15b.jpg Mike Groeber, US Air Force Overview of DREAM.3D “Analysing Data with Ease” [6.2.0 Released] DREAM.3d http://dream3d.bluequartz.net/ an open, extensible software environment to allow integrated processing, characterization and manipulation of microstructure digitally. DREAM.3D is an architecture for computational microstructure tools that allows users to create ‘recipes’ or pipelines for processing digital instances of microstructure. DREAM.3D establishes a robust set of checks and development guidelines to enable singular codes to operate in conjunction, facilitating larger research efforts/goals Software Architecture: DREAM3D is written using many open-source libraries in a layered approach that allows developers and implementors to use just the parts that they want to use. DREAM3D has a robust plugin system where new functionality can be added by developers. The licensing allows for both proprietary and open-source plugins.
 
Line: 350 to 350
 
META FILEATTACHMENT attachment="tn_tncSep-15.jpg" attr="" comment="" date="1439209298" name="tn_tncSep-15.jpg" path="tn_tncSep-15.jpg" size="15429" stream="tn_tncSep-15.jpg" tmpFilename="/tmp/ECliMmGxW0" user="MartinTurner" version="1"
META FILEATTACHMENT attachment="tn_tncSep-15b.jpg" attr="" comment="" date="1439209775" name="tn_tncSep-15b.jpg" path="tn_tncSep-15b.jpg" size="17761" stream="tn_tncSep-15b.jpg" tmpFilename="/tmp/S59XCPoi1l" user="MartinTurner" version="1"
META FILEATTACHMENT attachment="tn_tncOct-15.jpg" attr="" comment="" date="1444810653" name="tn_tncOct-15.jpg" path="tn_tncOct-15.jpg" size="66763" stream="tn_tncOct-15.jpg" tmpFilename="/tmp/OaAeCE59YX" user="MartinTurner" version="1"
Added:
>
>
META FILEATTACHMENT attachment="tn_tncOct-15b.jpg" attr="" comment="" date="1444819955" name="tn_tncOct-15b.jpg" path="tn_tncOct-15b.jpg" size="55956" stream="tn_tncOct-15b.jpg" tmpFilename="/tmp/h1cImRevc9" user="MartinTurner" version="1"

Revision 11814 Oct 2015 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 18 to 18
  2pm-3pm: Friday 30 October 2015 - Antoniu Pop Programming and Optimizing Task Data-Flow Applications with OpenStream and Aftermath Local host for this event is Sri Nagella (srikanth.nagella@stfc.ac.uk)
Deleted:
<
<
Abstract:Dynamic task-dependent parallelism is an increasingly popular programming model on shared-memory systems. Compared to data parallel loop-based concurrency, it promises enhanced scalability, load balancing and locality. These promises, however, are undermined by non-uniform memory access (NUMA). We show that it is possible to preserve the uniform hardware abstraction of contemporary task-parallel programming models, for both computing and memory resources, while achieving near-optimal data locality. Our run-time algorithms for NUMA-aware task and data placement are fully automatic, application-independent, performance-portable across NUMA machines, and adapt to dynamic changes. We take advantage of data-flow style task parallelism, where the privatization of task data enhances scalability through the elimination of false dependences, and enable fine-grained dynamic control over the placement of application data.
 
Changed:
<
<
In a second part, we present Aftermath, an interactive visualization tool for post-mortem trace analysis of cross-layer performance anomalies in dynamic task-parallel applications. We focus on the detection of anomalies inaccessible to state-of-the-art performance analysis techniques, including anomalies deriving from the interaction of multiple levels of software abstractions, anomalies associated with the hardware, and anomalies resulting from interferences between optimizations in the application and run-time system. Aftermath supports filtering, aggregation and joint visualization of key metrics and performance indicators, such as task duration, run-time state, hardware performance counters and data transfers. While not being specifically designed for NUMA architectures, Aftermath takes advantage of the explicit memory regions and dependence information in dependent task models to precisely capture long-distance and inter-core effects on complex, dynamic applications.
>
>
tn_tncOct-15.jpg Antoniu Pop Programming and Optimizing Task Data-Flow Applications with OpenStream and Aftermath Dynamic task-dependent parallelism is an increasingly popular programming model on shared-memory systems. Compared to data parallel loop-based concurrency, it promises enhanced scalability, load balancing and locality. These promises, however, are undermined by non-uniform memory access (NUMA). We show that it is possible to preserve the uniform hardware abstraction of contemporary task-parallel programming models, for both computing and memory resources, while achieving near-optimal data locality. Our run-time algorithms for NUMA-aware task and data placement are fully automatic, application-independent, performance-portable across NUMA machines, and adapt to dynamic changes. We take advantage of data-flow style task parallelism, where the privatization of task data enhances scalability through the elimination of false dependences, and enable fine-grained dynamic control over the placement of application data.In a second part, we present Aftermath, an interactive visualization tool for post-mortem trace analysis of cross-layer performance anomalies in dynamic task-parallel applications. We focus on the detection of anomalies inaccessible to state-of-the-art performance analysis techniques, including anomalies deriving from the interaction of multiple levels of software abstractions, anomalies associated with the hardware, and anomalies resulting from interferences between optimizations in the application and run-time system. Aftermath supports filtering, aggregation and joint visualization of key metrics and performance indicators, such as task duration, run-time state, hardware performance counters and data transfers. While not being specifically designed for NUMA architectures, Aftermath takes advantage of the explicit memory regions and dependence information in dependent task models to precisely capture long-distance and inter-core effects on complex, dynamic applications.
 

19 October VC seminar: Mike Groeber "Presentation on the general overview of DREAM.3D" http://dream3d.bluequartz.net/?p=1313

Line: 348 to 349
 
META FILEATTACHMENT attachment="tn_tncJul-15.jpg" attr="" comment="" date="1439204829" name="tn_tncJul-15.jpg" path="tn_tncJul-15.jpg" size="20258" stream="tn_tncJul-15.jpg" tmpFilename="/tmp/fS2FGrbOHS" user="MartinTurner" version="1"
META FILEATTACHMENT attachment="tn_tncSep-15.jpg" attr="" comment="" date="1439209298" name="tn_tncSep-15.jpg" path="tn_tncSep-15.jpg" size="15429" stream="tn_tncSep-15.jpg" tmpFilename="/tmp/ECliMmGxW0" user="MartinTurner" version="1"
META FILEATTACHMENT attachment="tn_tncSep-15b.jpg" attr="" comment="" date="1439209775" name="tn_tncSep-15b.jpg" path="tn_tncSep-15b.jpg" size="17761" stream="tn_tncSep-15b.jpg" tmpFilename="/tmp/S59XCPoi1l" user="MartinTurner" version="1"
Added:
>
>
META FILEATTACHMENT attachment="tn_tncOct-15.jpg" attr="" comment="" date="1444810653" name="tn_tncOct-15.jpg" path="tn_tncOct-15.jpg" size="66763" stream="tn_tncOct-15.jpg" tmpFilename="/tmp/OaAeCE59YX" user="MartinTurner" version="1"

Revision 11713 Oct 2015 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 13 to 13
 Update on High Powered Lasers exploitation: August 2015

Update on dataflow frameworks in Summer 2015 - Savu, IMAT and lab based versions

Added:
>
>

2pm-3pm: Friday 30 October 2015 - Antoniu Pop Programming and Optimizing Task Data-Flow Applications with OpenStream and Aftermath Local host for this event is Sri Nagella (srikanth.nagella@stfc.ac.uk)

Abstract:Dynamic task-dependent parallelism is an increasingly popular programming model on shared-memory systems. Compared to data parallel loop-based concurrency, it promises enhanced scalability, load balancing and locality. These promises, however, are undermined by non-uniform memory access (NUMA). We show that it is possible to preserve the uniform hardware abstraction of contemporary task-parallel programming models, for both computing and memory resources, while achieving near-optimal data locality. Our run-time algorithms for NUMA-aware task and data placement are fully automatic, application-independent, performance-portable across NUMA machines, and adapt to dynamic changes. We take advantage of data-flow style task parallelism, where the privatization of task data enhances scalability through the elimination of false dependences, and enable fine-grained dynamic control over the placement of application data.

In a second part, we present Aftermath, an interactive visualization tool for post-mortem trace analysis of cross-layer performance anomalies in dynamic task-parallel applications. We focus on the detection of anomalies inaccessible to state-of-the-art performance analysis techniques, including anomalies deriving from the interaction of multiple levels of software abstractions, anomalies associated with the hardware, and anomalies resulting from interferences between optimizations in the application and run-time system. Aftermath supports filtering, aggregation and joint visualization of key metrics and performance indicators, such as task duration, run-time state, hardware performance counters and data transfers. While not being specifically designed for NUMA architectures, Aftermath takes advantage of the explicit memory regions and dependence information in dependent task models to precisely capture long-distance and inter-core effects on complex, dynamic applications.


19 October VC seminar: Mike Groeber "Presentation on the general overview of DREAM.3D" http://dream3d.bluequartz.net/?p=1313

 

Seminars moving on an Away Day up to ToScA in Manchester for 2 September 2015

Changed:
<
<
tn_tncSep-15b.jpg The University of Manchester welcomes researchers at all levels to the CCPi imaging workshops where delegates will gain insights from and engage in troubleshooting sessions with specialists in Drishti/Prayog and Avizo. Held at the Photon Science Institute, home to the Henry Mosely X-Ray Imaging Facility (immediately prior to the Tomography for Scientific Advancement Symposium on 3rd-4th September). 2 September 2015 10am-1pm Drishti/Prayog training course - New topics and advanced use within version 2.6 of Drishti including updated version of Paint (release in July 2015; https://github.com/AjayLimaye/drishti/releases) 2 September 2015 1:30pm-4:30pm Avizo training course: 2 workflows related to analysis of fibrous materials will be presented. The second use-case is based a PhD student of Philip Withers, Bo Yu, and illustrates advanced usage of Avizo modules for segmentation. Rémi Blanc "Fibre analysis with Avizo" Abstract: The presentation will highlight different usages of Avizo for tackling with fibrous materials. We consider two major use cases. First, in the case of high magnification with resolved fibers, we will present our recent XFiber extension for tracing the centerline of cylindrical fibers and extracting statistics about the length, orientation, or curvature. The second use case will consider woven composites imaged at lower magnification, where individual fibers cannot be distinguished but the oriented texture of the yarns is visible. We will detail an advanced workflow for classifying the yarns based on their orientation. (http://www.avizo3d.com) 2 September 2015 4pm-5pm IVG (Interactive Visualisation Group), update meeting. Places are limited and allocated on a first come, first serve basis. To book your place please e-mail your name, institution and any dietary requirements to kate.a.meade@manchester.ac.uk
>
>
tn_tncSep-15b.jpg The University of Manchester welcomes researchers at all levels to the CCPi imaging workshops where delegates will gain insights from and engage in troubleshooting sessions with specialists in Drishti/Prayog and Avizo. Held at the Photon Science Institute, home to the Henry Mosely X-Ray Imaging Facility (immediately prior to the Tomography for Scientific Advancement Symposium on 3rd-4th September). 2 September 2015 10am-1pm Drishti/Prayog training course - New topics and advanced use within version 2.6 of Drishti including updated version of Paint (release in July 2015; https://github.com/AjayLimaye/drishti/releases) 2 September 2015 1:30pm-4:30pm Avizo training course: 2 workflows related to analysis of fibrous materials will be presented. The second use-case is based a PhD student of Philip Withers, Bo Yu, and illustrates advanced usage of Avizo modules for segmentation. Rémi Blanc "Fibre analysis with Avizo" Abstract: The presentation will highlight different usages of Avizo for tackling with fibrous materials. We consider two major use cases. First, in the case of high magnification with resolved fibers, we will present our recent XFiber extension for tracing the centerline of cylindrical fibers and extracting statistics about the length, orientation, or curvature. The second use case will consider woven composites imaged at lower magnification, where individual fibers cannot be distinguished but the oriented texture of the yarns is visible. We will detail an advanced workflow for classifying the yarns based on their orientation. (http://www.avizo3d.com) 2 September 2015 4pm-5pm IVG (Interactive Visualisation Group), update meeting. Places are limited and allocated on a first come, first serve basis. To book your place please e-mail your name, institution and any dietary requirements to kate.a.meade@manchester.ac.uk
  2 September 2015 10am-1pm Drishti/Prayog training course - New topics and advanced use within version 2.6 of Drishti including updated version of Paint (release in July 2015; https://github.com/AjayLimaye/drishti/releases)
Line: 25 to 37
  2 September 2015 4pm-5pm IVG (Interactive Visualisation Group), update meeting
Changed:
<
<
Places are limited and allocated on a first come, first serve basis. To book your place please e-mail your name, institution and any dietary requirements to kate.a.meade@manchester.ac.uk
>
>
Places are limited and allocated on a first come, first serve basis. To book your place please e-mail your name, institution and any dietary requirements to kate.a.meade@manchester.ac.uk
 
Line: 127 to 139
 
  • Friday 12 December 2014 - Talk by Prof Sarah Hainsworth, University of Leicester(27+)
  • Thursday 18 December 2014 - Data and Visualisation Needs Survey , Martin Turner, Tim Morris and Ron Fowler (9)
  • Friday 27 February 2015 - Fast X-ray reconstructioon and IMAT framework (18+3+5 - three site meetings)
Changed:
<
<
  • Friday 27 March 2015 - Image Analysis program from NOCTYlab (10)
  • Friday 24 April 2015 - Avizo VR Module Demonstration (7) Extra session on 7 May 2015 (...)
  • ...
>
>
  • Friday 27 March 2015 - Image Analysis program from NOCTYlab (10)
  • Friday 24 April 2015 - Avizo VR Module Demonstration (7) Extra session on 7 May 2015 (...)
  • ...
 
  • Ideas welcome ... for the next season.

Season 2013-2014: 12 Tomo-Coffee events and one ParaView event; 164 attendees. Meeting List:

Revision 11610 Aug 2015 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 15 to 15
 Update on dataflow frameworks in Summer 2015 - Savu, IMAT and lab based versions
Changed:
<
<
Seminars moving on an Away Day up to ToScA in Manchester for 2 September 2015
>
>
Seminars moving on an Away Day up to ToScA in Manchester for 2 September 2015

tn_tncSep-15b.jpg The University of Manchester welcomes researchers at all levels to the CCPi imaging workshops where delegates will gain insights from and engage in troubleshooting sessions with specialists in Drishti/Prayog and Avizo. Held at the Photon Science Institute, home to the Henry Mosely X-Ray Imaging Facility (immediately prior to the Tomography for Scientific Advancement Symposium on 3rd-4th September). 2 September 2015 10am-1pm Drishti/Prayog training course - New topics and advanced use within version 2.6 of Drishti including updated version of Paint (release in July 2015; https://github.com/AjayLimaye/drishti/releases) 2 September 2015 1:30pm-4:30pm Avizo training course: 2 workflows related to analysis of fibrous materials will be presented. The second use-case is based a PhD student of Philip Withers, Bo Yu, and illustrates advanced usage of Avizo modules for segmentation. Rémi Blanc "Fibre analysis with Avizo" Abstract: The presentation will highlight different usages of Avizo for tackling with fibrous materials. We consider two major use cases. First, in the case of high magnification with resolved fibers, we will present our recent XFiber extension for tracing the centerline of cylindrical fibers and extracting statistics about the length, orientation, or curvature. The second use case will consider woven composites imaged at lower magnification, where individual fibers cannot be distinguished but the oriented texture of the yarns is visible. We will detail an advanced workflow for classifying the yarns based on their orientation. (http://www.avizo3d.com) 2 September 2015 4pm-5pm IVG (Interactive Visualisation Group), update meeting. Places are limited and allocated on a first come, first serve basis. To book your place please e-mail your name, institution and any dietary requirements to kate.a.meade@manchester.ac.uk
  2 September 2015 10am-1pm Drishti/Prayog training course - New topics and advanced use within version 2.6 of Drishti including updated version of Paint (release in July 2015; https://github.com/AjayLimaye/drishti/releases)
Changed:
<
<
2 September 2015 1:30pm-4:30pm Avizo training course: 2 workflows related to analysis of fibrous materials will be presented. The second use-case is based a PhD student of Philip Withers, Bo Yu, and illustrates advanced usage of Avizo modules for segmentation. Rémi Blanc "Fibre analysis with Avizo" Abstract: The presentation will highlight different usages of Avizo for tackling with fibrous materials. We consider two major use cases. First, in the case of high magnification with resolved fibers, we will present our recent XFiber extension for tracing the centerline of cylindrical fibers and extracting statistics about the length, orientation, or curvature. The second use case will consider woven composites imaged at lower magnification, where individual fibers cannot be distinguished but the oriented texture of the yarns is visible. We will detail an advanced workflow for classifying the yarns based on their orientation. (http://www.avizo3d.com)
>
>
2 September 2015 1:30pm-4:30pm Avizo training course: 2 workflows related to analysis of fibrous materials will be presented. The second use-case is based on a PhD student of Philip Withers, Bo Yu, and illustrates advanced usage of Avizo modules for segmentation. Rémi Blanc "Fibre analysis with Avizo" Abstract: The presentation will highlight different usages of Avizo for tackling with fibrous materials. We consider two major use cases. First, in the case of high magnification with resolved fibers, we will present our recent XFiber extension for tracing the centerline of cylindrical fibers and extracting statistics about the length, orientation, or curvature. The second use case will consider woven composites imaged at lower magnification, where individual fibers cannot be distinguished but the oriented texture of the yarns is visible. We will detail an advanced workflow for classifying the yarns based on their orientation. (http://www.avizo3d.com)
  2 September 2015 4pm-5pm IVG (Interactive Visualisation Group), update meeting
Changed:
<
<
Places are limited and allocated on a first come, first serve basis. To book your place please e-mail your name, institution and any dietary requirements to kate.a.meade@manchester.ac.uk
>
>
Places are limited and allocated on a first come, first serve basis. To book your place please e-mail your name, institution and any dietary requirements to kate.a.meade@manchester.ac.uk
 
Line: 332 to 334
 
META FILEATTACHMENT attachment="tn_tncMar-15b.jpg" attr="" comment="" date="1426237630" name="tn_tncMar-15b.jpg" path="tn_tncMar-15b.jpg" size="19897" stream="tn_tncMar-15b.jpg" tmpFilename="/tmp/o1sjQhXxDK" user="MartinTurner" version="1"
META FILEATTACHMENT attachment="tn_tncApr-15.jpg" attr="" comment="" date="1430121175" name="tn_tncApr-15.jpg" path="tn_tncApr-15.jpg" size="19276" stream="tn_tncApr-15.jpg" tmpFilename="/tmp/H5aAkP20DP" user="MartinTurner" version="1"
META FILEATTACHMENT attachment="tn_tncJul-15.jpg" attr="" comment="" date="1439204829" name="tn_tncJul-15.jpg" path="tn_tncJul-15.jpg" size="20258" stream="tn_tncJul-15.jpg" tmpFilename="/tmp/fS2FGrbOHS" user="MartinTurner" version="1"
Added:
>
>
META FILEATTACHMENT attachment="tn_tncSep-15.jpg" attr="" comment="" date="1439209298" name="tn_tncSep-15.jpg" path="tn_tncSep-15.jpg" size="15429" stream="tn_tncSep-15.jpg" tmpFilename="/tmp/ECliMmGxW0" user="MartinTurner" version="1"
META FILEATTACHMENT attachment="tn_tncSep-15b.jpg" attr="" comment="" date="1439209775" name="tn_tncSep-15b.jpg" path="tn_tncSep-15b.jpg" size="17761" stream="tn_tncSep-15b.jpg" tmpFilename="/tmp/S59XCPoi1l" user="MartinTurner" version="1"

Revision 11510 Aug 2015 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 29 to 29
  Open Day events on 8-11 July 2015 - Showing 3D visualisation for various topics to over a thousand visitors.
Added:
>
>
tn_tncJul-15.jpg 8 July - Schools Visit day; 95 school visitor came to explore the history of computing and 3D space on the visualisation wall. Main public day on 11 July, with over 15000 visitors; and ~560 saw fluid flow and molecular visualisation presentations.Local host for this event is Sri Nagella (srikanth.nagella@stfc.ac.uk) and Ron Fowler (ronald.fowler@stfc.ac.uk)
 

2pm-3pm: Friday 24 April 2015 - Avizo Virtual Reality Module for Collaborative and Immersive VR – Now Touch Your Tomographic Volume

Line: 329 to 331
 
META FILEATTACHMENT attachment="tn_tncMar-15.jpg" attr="" comment="" date="1426237592" name="tn_tncMar-15.jpg" path="tn_tncMar-15.jpg" size="19897" stream="tn_tncMar-15.jpg" tmpFilename="/tmp/9tjx8YpLHD" user="MartinTurner" version="2"
META FILEATTACHMENT attachment="tn_tncMar-15b.jpg" attr="" comment="" date="1426237630" name="tn_tncMar-15b.jpg" path="tn_tncMar-15b.jpg" size="19897" stream="tn_tncMar-15b.jpg" tmpFilename="/tmp/o1sjQhXxDK" user="MartinTurner" version="1"
META FILEATTACHMENT attachment="tn_tncApr-15.jpg" attr="" comment="" date="1430121175" name="tn_tncApr-15.jpg" path="tn_tncApr-15.jpg" size="19276" stream="tn_tncApr-15.jpg" tmpFilename="/tmp/H5aAkP20DP" user="MartinTurner" version="1"
Added:
>
>
META FILEATTACHMENT attachment="tn_tncJul-15.jpg" attr="" comment="" date="1439204829" name="tn_tncJul-15.jpg" path="tn_tncJul-15.jpg" size="20258" stream="tn_tncJul-15.jpg" tmpFilename="/tmp/fS2FGrbOHS" user="MartinTurner" version="1"

Revision 11405 Aug 2015 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 15 to 15
 Update on dataflow frameworks in Summer 2015 - Savu, IMAT and lab based versions
Changed:
<
<
Open Day events on 8-11 July 2015 - Showing 3D visualisation for various topics to over a thousand visitors.
>
>
Seminars moving on an Away Day up to ToScA in Manchester for 2 September 2015

2 September 2015 10am-1pm Drishti/Prayog training course - New topics and advanced use within version 2.6 of Drishti including updated version of Paint (release in July 2015; https://github.com/AjayLimaye/drishti/releases)

2 September 2015 1:30pm-4:30pm Avizo training course: 2 workflows related to analysis of fibrous materials will be presented. The second use-case is based a PhD student of Philip Withers, Bo Yu, and illustrates advanced usage of Avizo modules for segmentation. Rémi Blanc "Fibre analysis with Avizo" Abstract: The presentation will highlight different usages of Avizo for tackling with fibrous materials. We consider two major use cases. First, in the case of high magnification with resolved fibers, we will present our recent XFiber extension for tracing the centerline of cylindrical fibers and extracting statistics about the length, orientation, or curvature. The second use case will consider woven composites imaged at lower magnification, where individual fibers cannot be distinguished but the oriented texture of the yarns is visible. We will detail an advanced workflow for classifying the yarns based on their orientation. (http://www.avizo3d.com)

2 September 2015 4pm-5pm IVG (Interactive Visualisation Group), update meeting

Places are limited and allocated on a first come, first serve basis. To book your place please e-mail your name, institution and any dietary requirements to kate.a.meade@manchester.ac.uk


Open Day events on 8-11 July 2015 - Showing 3D visualisation for various topics to over a thousand visitors.

 

Revision 11324 Jul 2015 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 10 to 10
 
Changed:
<
<
Update on High Powered Lasers exploitation: May/June 2015
>
>
Update on High Powered Lasers exploitation: August 2015

Update on dataflow frameworks in Summer 2015 - Savu, IMAT and lab based versions


Open Day events on 8-11 July 2015 - Showing 3D visualisation for various topics to over a thousand visitors.

 
Deleted:
<
<
Update on dataflow frameworks in late Spring/Summer 2015 - Savu, IMAT and lab based versions
 

2pm-3pm: Friday 24 April 2015 - Avizo Virtual Reality Module for Collaborative and Immersive VR – Now Touch Your Tomographic Volume

Revision 11207 May 2015 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 157 to 157
  SCD Seminar Series: Visualisation, VR and Computer Graphics topics presented at DL-RAL. See main site and announcements for full details.
Changed:
<
<
SCD Seminar 27 February 2015. 3pm-4pm - "Fast Tomography: From Airport Baggage Scanning to Materials Science" Nicola Wadeson, CCPi Visiting Scientist at Diamond @Room S44 in R89 at RAL and Video conference to Arkwright room in DL. The University of Manchester has recently purchased a Rapiscan RTT x-ray CT Machine, located in the School of Materials' Henry Moseley X-ray Imaging Facility (HMXIF). The RTT110 is capable of producing 3D images in real time, making it the fastest imager in the UK. Currently set-up for airport baggage scanning, we aim to adapt the machine to utilise its potential for a wide range of experiments, such as granular and multi-phase flows using dynamic x-ray CT. This will be at 3pm at Rutherford Appleton Laboratory on the Harwell Campus: in R89/Room S44 and room Arkwright in DL.
>
>
SCD Seminar 27 February 2015. 3pm-4pm - "Fast Tomography: From Airport Baggage Scanning to Materials Science" Nicola Wadeson, CCPi Visiting Scientist at Diamond @Room S44 in R89 at RAL and Video conference to Arkwright room in DL. The University of Manchester has recently purchased a Rapiscan RTT x-ray CT Machine, located in the School of Materials' Henry Moseley X-ray Imaging Facility (HMXIF). The RTT110 is capable of producing 3D images in real time, making it the fastest imager in the UK. Currently set-up for airport baggage scanning, we aim to adapt the machine to utilise its potential for a wide range of experiments, such as granular and multi-phase flows using dynamic x-ray CT. This will be at 3pm at Rutherford Appleton Laboratory on the Harwell Campus: in R89/Room S44 and room Arkwright in DL.
  ... There will also be an update on the ICP (IMAT Computing Project) – IMAT is the first neutron imaging instrument at ISIS; the first of its kind in the world offering unique time-of-flight tomography-driven diffraction techniques; and will link to SCD computational facilities. Lead by Erica Yang http://stfc.ac.uk/SCD/research/data/44593.aspx
Line: 216 to 216
 
Training Courses:
Added:
>
>
28 April 2015, Developers' Day at Manchester Workshop to focus on iterative solutions for the XTek machines (such as the released CGLS code) and what is required to get them into regular usage in the labs that use these machines. 11am-4pm.

27-30 April 2015 Physics & Software PET-MR training school this April in Leeds. If any early stage researchers wishes to attend (Masters, PhDs, or Post-Docs) might be possible to attend for free if they express their interest on time (UK-affiliated researchers are welcome to apply). http://www.pet-mri.eu/PETMR_School_15.html

Training Diamond Manchester Collaboration, CCPi and HIP, the University of Manchester and Diamond Light Source will be running a 2 day course on the Visualisation and quantification of tomographic data. The course will be based both around open-source software (ImageJ) and commercial software AVIZO Software course. This is the fourth training course of this kind to be offered by the Diamond Manchester Collaboration and will be on the 16th and 17th of April 2015 at Diamond Light Source. The course will consist of a lecture and hands-on exercises intended for new or existing users of Avizo software. Attendee capacity for the training is limited to 25 so if you are interested please register with me at your earliest opportunity. As we are also training future trainers, people volunteering to help in future courses will be given priority.

24 March 2015 Developers' Day for CCPi on Touch Table integration and use; at the University of Reading.

Diamond and ISIS have a CDT doctoral training working shop in 9-13 March 2015. On 9 March there will a one 2h introduction and a 2h training session on imaging and visualisation. Contact Winfried Kockelmann

17-20 February 2015, Developers' Day at Manchester supported by CCPi - "Avizo developement - Module integration - Reconstruction techniques - Image processing" four day workshop: ICMCB-CNRS: CCPI: MXIF: UOM - Maths: AVIZO: AMARI: Diamond I12

Mantid Training Courses Feb 2015. The following courses will be based at ISIS, RAL and are: Monday 16th February 1-5pm: Mantid Introduction An introduction to the Mantid interface, how to graph and visualize your data, manipulate it with the built in algorithms, together with an introduction to curve fitting and live data analysis. Tuesday 17th February 9-12am: Introduction to Python This half day course will introduce you to the Python scripting language, no previous experience required, although some understanding of loops and conditional if statements will be expected. Tuesday 17th February 1-5pm: Python in Mantid This course concentrates on using Python to build analysis scripts within Mantid as well as controlling the Mantid GUI from python, and accessing the underlying data within Mantid workspaces. Wednesday 18th February 9-5pm: Extending Mantid using Python For the more adventurous among you this course will introduce you to the many ways you can use Python to extend the capabilities within Mantid adding Python Algorithms and curve fitting functions, as well as diving deeper into the structure of workspaces. After the feedback from the previous run this course has been extended to a full day course, together with adding more material. Booking a place If you are interested in any other these courses please send an email to nick.draper@stfc.ac.uk

1-2 December 2014 As part of the Diamond Manchester Collaboration, CCPi and HIP, the University of Manchester and Diamond Light Source will be running a 2 day course on the Visualisation and quantification of tomographic data. The course will be based around open-source software (ImageJ) and commercial software AVIZO Software

Cryo-Ops 2014 held was big success with 93 people viewing- although in three sessions. November 12, 2014

Python Community of practice 2 (PyCoP2) run by CCPi WG member Mark Basham “Community of Practice” event targeting Python which is used widely around the RAL Site; 31 October 2014

22 October 2014 - Developers' Workshop: CCPi Released a executable based on code from the University of Manchester that uses the iterative CGLS algorithm for image reconstruction from XTek CT systems. The defaults in the interface should provide reasonable initial values. A full resolution reconstruction will use ~128GB and depending on your system can take a few hours per iteration. The project page on CCPForge is http://ccpforge.cse.rl.ac.uk/gf/project/cgls

 Introduction to the Software Engineering Support Centre and CCPForge: Tuesday, 7th October 2014. Related to CCPs etc. https://eventbooking.stfc.ac.uk/news-events/introduction-to-the-software-engineering-support-centre-and-ccpforge-230

UoM: HMXIF Courses 8-12 September 2014: Introduction to X-ray Computed Tomography (XCT) and AVIZO standard on the 8th Sept. AVIZO Fire – advanced characterisation of discrete features such as precipitates using AVIZO - 9th Sept. Analysis of interconnected structures such as complex porosity structures using AVIZO, ImageJ and MATLAB - 10th Sept. Image based meshing course – this course will explain how to create a model mesh using ScanIP with volumes generated from AVIZO. These meshes can then be used directly in ABAQUS – 11th Sept. For advanced users, collaborators and industrial partners of the HMXIF only (please contact HMXIF staff for this course) How XCT instruments work: This course will cover the individual components of XCT instruments and their respective capabilities – this is essential to those who want to know how data is generated and affected under different conditions – 12th Sept.

Revision 11106 May 2015 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 12 to 12
  Update on High Powered Lasers exploitation: May/June 2015
Changed:
<
<
Update on dataflow frameworks in late Spring/Summer 2015 - Savu, IMAT and lab based versions.
>
>
Update on dataflow frameworks in late Spring/Summer 2015 - Savu, IMAT and lab based versions
 

2pm-3pm: Friday 24 April 2015 - Avizo Virtual Reality Module for Collaborative and Immersive VR – Now Touch Your Tomographic Volume

Line: 24 to 24
 
tn_tncApr-15.jpg The Avizo VR Module enables advanced data visualization and analysis with large tiled displays as well as immersive VR configurations like CAVEs. With its unique set of features this Option represents Virtual Reality ready application for scientific and medical visualization in immersive environments. This provides; Full immersive 3D interaction; Support for single and multiple screens; Support for single and multi-pipe and for graphic clusters; Flexible customization for specific display geometry; Head-tracking and tracked hand-held 3D input devices; Control functionality via user interface; and Control of 2D user interfaces with 3D devices (virtual mouse).Local host for this event is Sri Nagella (srikanth.nagella@stfc.ac.uk)


Deleted:
<
<
2pm-3pm: Friday 24 April 2015 - Avizo Virtual Reality Module for Collaborative and Immersive VR – Now Touch Your Tomographic Volume

RAL Atlas Visualisation Facility – Live demo so you need to be there, and please bring your own data!

Local host: Sri Nagella (srikanth.nagella@stfc.ac.uk)

"The Avizo VR Module enables advanced data visualization and analysis with large tiled displays as well as immersive VR configurations like CAVEs. With its unique set of features this Option represents Virtual Reality ready application for scientific and medical visualization in immersive environments.

  • Full immersive 3D interaction
  • Support for single and multiple screens
  • Support for single and multi-pipe and for graphic clusters
  • Flexible customization for specific display geometry
  • Head-tracking and tracked hand-held 3D input devices
  • Control functionality via user interface
  • Control of 2D user interfaces with 3D devices (virtual mouse)."


  2pm-3pm: Friday 27 March 2015 - Image processing software, NOCTYlab, show-and-tell from NOCTYLIO (http://www.noctylio.com/) "Noctylio is a software start-up company located in Bordeaux; its purpose is to open up new horizons in 3D imaging."
Line: 125 to 108
 
  • Thursday 18 December 2014 - Data and Visualisation Needs Survey , Martin Turner, Tim Morris and Ron Fowler (9)
  • Friday 27 February 2015 - Fast X-ray reconstructioon and IMAT framework (18+3+5 - three site meetings)
  • Friday 27 March 2015 - Image Analysis program from NOCTYlab (10)
Changed:
<
<
  • Friday 24 April 2015 - Avizo VR Module Demonstration (7)
>
>
  • Friday 24 April 2015 - Avizo VR Module Demonstration (7) Extra session on 7 May 2015 (...)
 
  • ...
  • Ideas welcome ... for the next season.
Line: 168 to 151
  ParaView Forum (DL) Meeting 28 August 2014, 2pm: A branded ParaView-based application, called tomviz by Marcus D. Hanwell et al.: "with a focus on STEM tomography at atomic resolutions for materials, but it is also exploring how to make a focused application that enables visualization and analysis of volumes: http://www.tomviz.org/ Developing the concept of data processing in Python to enable researchers to easily develop new data analysis, reconstruction, and transformation techniques leveraging things like numpy. It was presented at M&M two weeks ago, and we will be adding some alignment and reconstruction capabilities in the next release."
Added:
>
>
Session at Daresbury Labs on Wednesday 29 April 2015.
 

SCD Seminar Series: Visualisation, VR and Computer Graphics topics presented at DL-RAL. See main site and announcements for full details.

Added:
>
>
SCD Seminar 27 February 2015. 3pm-4pm - "Fast Tomography: From Airport Baggage Scanning to Materials Science" Nicola Wadeson, CCPi Visiting Scientist at Diamond @Room S44 in R89 at RAL and Video conference to Arkwright room in DL. The University of Manchester has recently purchased a Rapiscan RTT x-ray CT Machine, located in the School of Materials' Henry Moseley X-ray Imaging Facility (HMXIF). The RTT110 is capable of producing 3D images in real time, making it the fastest imager in the UK. Currently set-up for airport baggage scanning, we aim to adapt the machine to utilise its potential for a wide range of experiments, such as granular and multi-phase flows using dynamic x-ray CT. This will be at 3pm at Rutherford Appleton Laboratory on the Harwell Campus: in R89/Room S44 and room Arkwright in DL.

... There will also be an update on the ICP (IMAT Computing Project) – IMAT is the first neutron imaging instrument at ISIS; the first of its kind in the world offering unique time-of-flight tomography-driven diffraction techniques; and will link to SCD computational facilities. Lead by Erica Yang http://stfc.ac.uk/SCD/research/data/44593.aspx

Related SCD Session: 11am: 13 February 2015 - Talk by Prof. H. Jasak and Dr G. Tabor in Cockcroft Walton Room A DL & VC Link to S48/R89 RAL. 'OpenFOAM and FOAM-Extend: Overview of Capabilities' OpenFOAM® (Open Field Operation and Manipulation) is an open source Computational Fluid Dynamics (CFD) software, which is widely used in both academia and commercial organizations. This seminar will be delivered by two of the most prominent members of the OpenFOAM community in the UK, Prof H. Jasak and Dr G. Tabor. The first part will review the numerical capabilities of OpenFOAM with a particular focus on an enhanced released of the software name FOAM-EXTENDED particularly for multiphase and moving mesh type of calculations. The second part will be devoted to the review of some recent applications performed at the University of Exeter in the field of Suitable Urban Drainage, Tidal renewable energy and compact 3D printed heat exchangers. Some details about Image Base Meshing will be also given. Friday 13 February

Coffee-and-Tomo Session: 3pm-4pm: 10 October 2014 - Talk by Russell Garwood in R89 (S44) Open source software for visualising tomographic datasets: Russell Garwood; University of Manchester. “This talk will provide an overview of free and/or open source software for processing and visualising tomographic datasets. It will be followed by a discussion of other software/tools for performing quantitative analysis of this data. One of the greatest weaknesses of open source packages available - or indeed my knowledge of what's out there - is a lack of free tools for quantifying tomographic data.“ R89/ room S44. If lost or unsure please email: martin.turner@stfc.ac.uk

 3pm, 27 August 2014 SCD Seminar hosted by Tom Keal, CCP5/BioSIM: "Avogadro 2: Scaling to Large Systems, Improving Code Integration and Chemical Data Informatics/Analytics" Location: STFC sites: Arkwright A23 (2nd Floor) DL & VC Link to S44/R89 RAL

Abstract: Avogadro 2 is a complete rewrite of the Avogadro project, with a suite of targeted software libraries, and application all permissively licensed under the open source BSD license. Everything from core data structures, file input/output, and rendering have been rewritten with an emphasis on extensibility and scalability while maintaining usability. Avogadro 2 has been demonstrated interactively rendering large systems with in excess of 2.8 million atoms, and small quantum results using volume rendering for electronic structure among other techniques.

Revision 11028 Apr 2015 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 10 to 10
 
Changed:
<
<
Update on High Powered Lasers exploitation: April 2015 - possible 30th
>
>
Update on High Powered Lasers exploitation: May/June 2015
 
Changed:
<
<
Update on dataflow frameworks in late Spring/Summer 2015 - Suvu, IMAT and lab based versions.
>
>
Update on dataflow frameworks in late Spring/Summer 2015 - Savu, IMAT and lab based versions.
 
Deleted:
<
<
 2pm-3pm: Friday 24 April 2015 - Avizo Virtual Reality Module for Collaborative and Immersive VR – Now Touch Your Tomographic Volume

RAL Atlas Visualisation Facility – Live demo so you need to be there, and please bring your own data!

Line: 25 to 24
 
tn_tncApr-15.jpg The Avizo VR Module enables advanced data visualization and analysis with large tiled displays as well as immersive VR configurations like CAVEs. With its unique set of features this Option represents Virtual Reality ready application for scientific and medical visualization in immersive environments. This provides; Full immersive 3D interaction; Support for single and multiple screens; Support for single and multi-pipe and for graphic clusters; Flexible customization for specific display geometry; Head-tracking and tracked hand-held 3D input devices; Control functionality via user interface; and Control of 2D user interfaces with 3D devices (virtual mouse).Local host for this event is Sri Nagella (srikanth.nagella@stfc.ac.uk)


Changed:
<
<
2pm-3pm: Friday 24 April 2015 - Avizo Virtual Reality Module for Collaborative and Immersive VR – Now Touch Your Tomographic Volume
>
>
2pm-3pm: Friday 24 April 2015 - Avizo Virtual Reality Module for Collaborative and Immersive VR – Now Touch Your Tomographic Volume
  RAL Atlas Visualisation Facility – Live demo so you need to be there, and please bring your own data!
Line: 125 to 124
 
  • Friday 12 December 2014 - Talk by Prof Sarah Hainsworth, University of Leicester(27+)
  • Thursday 18 December 2014 - Data and Visualisation Needs Survey , Martin Turner, Tim Morris and Ron Fowler (9)
  • Friday 27 February 2015 - Fast X-ray reconstructioon and IMAT framework (18+3+5 - three site meetings)
Changed:
<
<
  • Friday 27 March 2015 - Image Analysis program from NOCTYlab (...)
  • April 2015 - TBD
>
>
  • Friday 27 March 2015 - Image Analysis program from NOCTYlab (10)
  • Friday 24 April 2015 - Avizo VR Module Demonstration (7)
 
  • ...
  • Ideas welcome ... for the next season.
Line: 158 to 157
  https://wiki.e-science.cclrc.ac.uk/web1/bin/view/VisualisationCentre/AtlasRoom
Deleted:
<
<
email hartee@stfc.ac.uk
 Srikanth Nagella (srikanth.nagella@stfc.ac.uk), Ron Fowler (ronald.fowler@stfc.ac.uk) or Martin Turner (martin.turner@stfc.ac.uk)

Revision 10927 Apr 2015 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 15 to 15
 Update on dataflow frameworks in late Spring/Summer 2015 - Suvu, IMAT and lab based versions.
Added:
>
>
2pm-3pm: Friday 24 April 2015 - Avizo Virtual Reality Module for Collaborative and Immersive VR – Now Touch Your Tomographic Volume

RAL Atlas Visualisation Facility – Live demo so you need to be there, and please bring your own data!

Local host for this event is Sri Nagella (srikanth.nagella@stfc.ac.uk)

tn_tncApr-15.jpg The Avizo VR Module enables advanced data visualization and analysis with large tiled displays as well as immersive VR configurations like CAVEs. With its unique set of features this Option represents Virtual Reality ready application for scientific and medical visualization in immersive environments. This provides; Full immersive 3D interaction; Support for single and multiple screens; Support for single and multi-pipe and for graphic clusters; Flexible customization for specific display geometry; Head-tracking and tracked hand-held 3D input devices; Control functionality via user interface; and Control of 2D user interfaces with 3D devices (virtual mouse).Local host for this event is Sri Nagella (srikanth.nagella@stfc.ac.uk)


 2pm-3pm: Friday 24 April 2015 - Avizo Virtual Reality Module for Collaborative and Immersive VR – Now Touch Your Tomographic Volume

RAL Atlas Visualisation Facility – Live demo so you need to be there, and please bring your own data!

Line: 290 to 300
 
META FILEATTACHMENT attachment="tn_tncFeb-15b.jpg" attr="" comment="" date="1424719301" name="tn_tncFeb-15b.jpg" path="tn_tncFeb-15b.jpg" size="32310" stream="tn_tncFeb-15b.jpg" tmpFilename="/tmp/N5fVAvH8p2" user="MartinTurner" version="1"
META FILEATTACHMENT attachment="tn_tncMar-15.jpg" attr="" comment="" date="1426237592" name="tn_tncMar-15.jpg" path="tn_tncMar-15.jpg" size="19897" stream="tn_tncMar-15.jpg" tmpFilename="/tmp/9tjx8YpLHD" user="MartinTurner" version="2"
META FILEATTACHMENT attachment="tn_tncMar-15b.jpg" attr="" comment="" date="1426237630" name="tn_tncMar-15b.jpg" path="tn_tncMar-15b.jpg" size="19897" stream="tn_tncMar-15b.jpg" tmpFilename="/tmp/o1sjQhXxDK" user="MartinTurner" version="1"
Added:
>
>
META FILEATTACHMENT attachment="tn_tncApr-15.jpg" attr="" comment="" date="1430121175" name="tn_tncApr-15.jpg" path="tn_tncApr-15.jpg" size="19276" stream="tn_tncApr-15.jpg" tmpFilename="/tmp/H5aAkP20DP" user="MartinTurner" version="1"

Revision 10808 Apr 2015 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 13 to 13
 Update on High Powered Lasers exploitation: April 2015 - possible 30th

Update on dataflow frameworks in late Spring/Summer 2015 - Suvu, IMAT and lab based versions.

Added:
>
>

2pm-3pm: Friday 24 April 2015 - Avizo Virtual Reality Module for Collaborative and Immersive VR – Now Touch Your Tomographic Volume

RAL Atlas Visualisation Facility – Live demo so you need to be there, and please bring your own data!

Local host: Sri Nagella (srikanth.nagella@stfc.ac.uk)

"The Avizo VR Module enables advanced data visualization and analysis with large tiled displays as well as immersive VR configurations like CAVEs. With its unique set of features this Option represents Virtual Reality ready application for scientific and medical visualization in immersive environments.

  • Full immersive 3D interaction
  • Support for single and multiple screens
  • Support for single and multi-pipe and for graphic clusters
  • Flexible customization for specific display geometry
  • Head-tracking and tracked hand-held 3D input devices
  • Control functionality via user interface
  • Control of 2D user interfaces with 3D devices (virtual mouse)."
 

Revision 10723 Mar 2015 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 10 to 10
 
Changed:
<
<
Update on High Powered Lasers exploitation: April 2015
>
>
Update on High Powered Lasers exploitation: April 2015 - possible 30th

Update on dataflow frameworks in late Spring/Summer 2015 - Suvu, IMAT and lab based versions.

 

2pm-3pm: Friday 27 March 2015 - Image processing software, NOCTYlab, show-and-tell from NOCTYLIO (http://www.noctylio.com/) "Noctylio is a software start-up company located in Bordeaux; its purpose is to open up new horizons in 3D imaging."

Changed:
<
<
tn_tncMar-15b.jpg "Noctylio: advanced image analysis software" Sarah Dubreucq, Benoit Recur, Eric Dehez (Noctylio SAS http://www.noctylio.com/) Noctylab v1.0 is a 3D imaging software including a large range of up-to-date image and signal processing algorithms as standards, different 3D visualisation modes such as surface and volume rendering, as well as image and signal analysis, measures and quantification tools. Noctylab v1.0 handles processing sequences that can be created, optimized and thus launched on large datasets in order to maximize computing resource usage and minimize user interactions. Specifically, we will show how Noctylab v1.0 implements tubular shape analysis sequence (archeo-bronchial tree or vascularity) based on 3D skeletonization and topology, in order to get caliber measures along branches. Moreover, the software adaptability allows the exploitation of all these tools from new imaging modalities, such as THz scanners. We will also introduce tools dedicated to hyper-spectral analysis and adapted to time-domain spectroscopy or 3D THz imaging. Such tools aim at combining both image and signal processing techniques to obtain 3D visualisation and benefit from image-based measures/analysis tools from hyper-spectral signals. This will be at 2pm at Rutherford Appleton Laboratory on the Harwell Campus: in R89/Room S44 and room Arkwright in DL.
>
>
Local host for this event is Sri Nagella (srikanth.nagella@stfc.ac.uk)

tn_tncMar-15b.jpg "Noctylio: advanced image analysis software" Sarah Dubreucq, Benoit Recur, Eric Dehez (Noctylio SAS http://www.noctylio.com/) Noctylab v1.0 is a 3D imaging software including a large range of up-to-date image and signal processing algorithms as standards, different 3D visualisation modes such as surface and volume rendering, as well as image and signal analysis, measures and quantification tools. Noctylab v1.0 handles processing sequences that can be created, optimized and thus launched on large datasets in order to maximize computing resource usage and minimize user interactions. Specifically, we will show how Noctylab v1.0 implements tubular shape analysis sequence (archeo-bronchial tree or vascularity) based on 3D skeletonization and topology, in order to get caliber measures along branches. Moreover, the software adaptability allows the exploitation of all these tools from new imaging modalities, such as THz scanners. We will also introduce tools dedicated to hyper-spectral analysis and adapted to time-domain spectroscopy or 3D THz imaging. Such tools aim at combining both image and signal processing techniques to obtain 3D visualisation and benefit from image-based measures/analysis tools from hyper-spectral signals. This will be at 2pm at Rutherford Appleton Laboratory on the Harwell Campus: in R89/Room S44 and room Arkwright in DL (and if there is demand to Manchester ICAM). Local host for this event is Sri Nagella (srikanth.nagella@stfc.ac.uk)
 

Revision 10613 Mar 2015 - MartinTurner

Line: 1 to 1
 
META TOPICPARENT name="WebHome"

Past and present seminar information including links for visualisation.

Line: 10 to 10
 
Changed:
<
<
2pm-3pm: Friday 27 March 2014 - Image processing software, NOCTYlab, show-and-tell from NOCTYLIO (http://www.noctylio.com/) "Noctylio is a software start-up company located in Bordeaux; its purpose is to open up new horizons in 3D imaging."
>
>
Update on High Powered Lasers exploitation: April 2015
 
Changed:
<
<
tn_tncMar-15.jpg "Noctylio: advanced image analysis software" Sarah Dubreucq, Benoit Recur, Eric Dehez (Noctylio SAS http://www.noctylio.com/) Noctylab v1.0 is a 3D imaging software including a large range of up-to-date image and signal processing algorithms as standards, different 3D visualisation modes such as surface and volume rendering, as well as image and signal analysis, measures and quantification tools. Noctylab v1.0 handles processing sequences that can be created, optimized and thus launched on large datasets in order to maximize computing resource usage and minimize user interactions. Specifically, we will show how Noctylab v1.0 implements tubular shape analysis sequence (archeo-bronchial tree or vascularity) based on 3D skeletonization and topology, in order to get caliber measures along branches. Moreover, the software adaptability allows the exploitation of all these tools from new imaging modalities, such as THz scanners. We will also introduce tools dedicated to hyper-spectral analysis and adapted to time-domain spectroscopy or 3D THz imaging. Such tools aim at combining both image and signal processing techniques to obtain 3D visualisation and benefit from image-based measures/analysis tools from hyper-spectral signals. This will be at 2pm at Rutherford Appleton Laboratory on the Harwell Campus: in R89/Room S44 and room Arkwright in DL.
>
>

2pm-3pm: Friday 27 March 2015 - Image processing software, NOCTYlab, show-and-tell from NOCTYLIO (http://www.noctylio.com/) "Noctylio is a software start-up company located in Bordeaux; its purpose is to open up new horizons in 3D imaging."

tn_tncMar-15b.jpg "Noctylio: advanced image analysis software" Sarah Dubreucq, Benoit Recur, Eric Dehez (Noctylio SAS http://www.noctylio.com/) Noctylab v1.0 is a 3D imaging software including a large range of up-to-date image and signal processing algorithms as standards, different 3D visualisation modes such as surface and volume rendering, as well as image and signal analysis, measures and quantification tools. Noctylab v1.0 handles processing sequences that can be created, optimized and thus launched on large datasets in order to maximize computing resource usage and minimize user interactions. Specifically, we will show how Noctylab v1.0 implements tubular shape analysis sequence (archeo-bronchial tree or vascularity) based on 3D skeletonization and topology, in order to get caliber measures along branches. Moreover, the software adaptability allows the exploitation of all these tools from new imaging modalities, such as THz scanners. We will also introduce tools dedicated to hyper-spectral analysis and adapted to time-domain spectroscopy or 3D THz imaging. Such tools aim at combining both image and signal processing techniques to obtain 3D visualisation and benefit from image-based measures/analysis tools from hyper-spectral signals. This will be at 2pm at Rutherford Appleton Laboratory on the Harwell Campus: in R89/Room S44 and room Arkwright in DL.
 
Changed:
<
<
3:00pm-3:30pm: Friday 27 February 2014 - "Fast Tomography: From Airport Baggage Scanning to Materials Science" Nicola Wadeson, CCPi Visiting Scientist at Diamond @Room S44 in R89 at RAL and Video conference to Arkwright room in DL and to ICAM in University of Manchester.
>
>
3:00pm-3:30pm: Friday 27 February 2015 - "Fast Tomography: From Airport Baggage Scanning to Materials Science" Nicola Wadeson, CCPi Visiting Scientist at Diamond @Room S44 in R89 at RAL and Video conference to Arkwright room in DL and to ICAM in University of Manchester.
 
Changed:
<
<
3:30pm-4:00pm: Friday 27 February 2014 - "Update and SCD view of the ICP: IMAT Computing Project " Sri Nagella and Erica Yang, @Room S44 in R89 at RAL and Video conference to Arkwright room in DL and to ICAM in University of Manchester.
>
>
3:30pm-4:00pm: Friday 27 February 2015 - "Update and SCD view of the ICP: IMAT Computing Project " Sri Nagella and Erica Yang, @Room S44 in R89 at RAL and Video conference to Arkwright room in DL and to ICAM in University of Manchester.
 
tn_tncFeb-15.jpg The University of Manchester has recently purchased a Rapiscan RTT x-ray CT Machine, located in the School of Materials' Henry Moseley X-ray Imaging Facility (HMXIF). The RTT110 is capable of producing 3D images in real time, making it the fastest imager in the UK. Currently set-up for airport baggage scanning, we aim to adapt the machine to utilise its potential for a wide range of experiments, such as granular and multi-phase flows using dynamic x-ray CT. This will be at 3pm at Rutherford Appleton Laboratory on the Harwell Campus: in R89/Room S44 and room Arkwright in DL.
Line: 263 to 267
 
META FILEATTACHMENT attachment="semseason2014_2015.jpg" attr="" comment="" date="1420204794" name="semseason2014_2015.jpg" path="semseason2014_2015.jpg" size="116463" stream="semseason2014_2015.jpg" tmpFilename="/tmp/ptUH05wWPW" user="MartinTurner" versi